Problem in Add entry with 99 k attributes

Similar Questions

• APEX 5 calendar add entry with button

  Hi all

  In our application (APEX 5.0.1) we use a calendar and to display a separate button to add entries in the calendar.

  The button works fine and opens the same page such as specified in the 'create' link and the insert works fine as well.

  The only problem we seem to have is that when we submit the page via the button, the calendar does not show the newly inserted record.

  When we do by means of clicking on a date, it works very well.

  After refreshing the page, the two records are displayed.

  Adding an offshoot tried for the calendar, but it did not help.

  An idea that could help to solve this problem is welcome.

  Kind regards

  Kim

  Hi Kim Mertens.

  Kim Mertens says:

  In our application (APEX 5.0.1) we use a calendar and to display a separate button to add entries in the calendar.

  The button works fine and opens the same page such as specified in the 'create' link and the insert works fine as well.

  The only problem we seem to have is that when we submit the page via the button, the calendar does not show the newly inserted record.

  When we do by means of clicking on a date, it works very well.

  After refreshing the page, the two records are displayed.

  Adding an offshoot tried for the calendar, but it did not help.

  An idea that could help to solve this problem is welcome.

  What type is your calendar entry page? Normal dialogue / Modal?

  I think it is the modal dialog box / Popup, you can use the dialog close event to refresh the calendar area using dynamic action.

  Here's an example where I demonstrated refresh calendar region on the evolution of the selection list using dynamic action.

  Reference: Re: Please help. Make a dynamic action

  Kind regards

  Kiran

• Problem with the editor attribute PULLDOWN

  When we use the Editor menu attribute drop-DOWN we know the following behavior.

  We have a definition of the content with a non-binding string attribute which is an attribute of pulldown editor configured with queryassetname.

  When its use in the contributor interface following the chronology of the events:

  (1) content > new asset

  (2) assign a value in the launch menu displayed by the editor attribute of pulldown

  (3) save

  (4) modify the same assets and try to put a value empty in the attribute that is assigned pulldown attribute Editor, but it is not possible because there is no possible empty selection to leave blank the value of the attribute as it was by default.

  Thanks for any help in advance.

  Pedro

  Hi Pedro,

  There is a default created for the problem you describe: Bug 17562306 - menu DEROULANT ATTRIBUTE EDITOR not IS NOT HAVE WHITE VALUE for the OPTIONAL ATTRIBUTES.
  However this applies only when you use name QUERYASSETNAME instead of element tags to populate the attribute PullDown.

  I just did a quick test to create a new attribute to dropdown using element tags and it worked fine when I set a single value, saved and then set empty. See screenshots

  

  

  I was able to find a workaround for the active query name, it is to add value, then you can use it as a vacuum. See below:

  Add a null value line in the query of the assets of the query result.  In this way, there will be a null value to select in the drop-down menu to remove the value.

  for example SELECT name as the value of the status of Content_C WHERE<>"VO" UNION (SELECT NULL FROM DUAL) ORDER BY VALUE asc NULLS FIRST

  Of workaround seems to work for the attributes of optional or required string using this attribute of menu editor drop-DOWN with a resource request.

  Let me know you have questions.

  Best regards

  Guillermo.

• Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

  Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

  I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

  Fixed a problem when converting the mp3 file. WAV...

  some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

• Problem with pushing the attribute child xml to an empty array

  Hi guys,.

  I have another problem with the bet, or should I say, pushing data from an xml file to an empty array, as I stated earlier.

  During the xml_mc.onload, I can see the data, but after that, it becomes undefined.

  It seems that I couldn't find the solution on the net as well. I suspect that's not possible, but I'm not giving up.

  Please help me.

  Thank you.

  This is the code example:

  var monTableau = new Array();

  var xml1:XML = new XML();

  Xml1.ignoreWhite = true;

  Xml1.onload = function (success: Boolean) {}

  {if (Success)}

  var nodes = this.firstChild.childNodes;

  for (i = 0; i < nodes.length; i ++) {}

  MyArray [i] = nodes [i].attributes.name;

  }

  Text1. Text = MyArray [2];  to check if the 'name' attribute is visible

  } else {}

  trace ("could not load the XML");

  }

  }

  Xml1.load ("icons.xml");

  Text1. Text = MyArray [2]; I commented on the first text to try to display it again, and the result is not DEFINED...

  the XML would look like this:

  icons. XML

  < icons >

  < name of icon = "icon1" / >

  < name of icon = "icon2" / >

  < name of icon = "icon3" / >

  < name of icon = "icon4" / >

  < / icons >

  Thank you

  I do not understand your problem.  Table fill with data.  If you expect this second "text1.text ="show another thing that 'no set', it won't happen as you wrote it. "  This line of code is run before the onLoad function (code execution does not wait for loading files).  You want only to deal with the processing of the data, once the onLoad function he treated in the table.

• Is it possible to add "Open with" to context menu right click while we select several files?

  I found somw ways to add 'Open with' to the right, click pop up constantly, but I want to know if it is possible to add this option to select a group of files of the same type.

  Please guide me if I make a mistake.

  Thank you

  1. right click on the interested file called 'test1.abc '.

  2. click on 'Open with' option

  3. Select the application needed to open the file

  4. Please activate option "always use the selected program to open this type of file"

  5. click on ok

  Subsequently all "* .abc" files (test2.abc, test3.abc etc.) are opened by preferred application (selected) you in what precedes.

  ------------------------------------------------

  If this response has resolved your problem, please select this answer as a response

• VSphere Orchestrator (vco) - problem to add a Powershell host

  Hello world

  I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.

  I followed this tutorial:

  http://blogs.technet.com/b/meamcs/archive/2012/02/25/how-to-force-WinRM-to-listen-interfaces-over-HTTPS.aspx

  I can connect with Powershell to a second server HTTPS but not with the vco...

  This is my setup:

  PS WSMan:\localhost\Client> winrm get winrm/config
  Config
      MaxEnvelopeSizekb = 500
      MaxTimeoutms = 60000
      MaxBatchItems = 32000
      MaxProviderRequests = 4294967295
      Client
          NetworkDelayms = 5000
          URLPrefix = wsman
          AllowUnencrypted = true
          Auth
              Basic = true
              Digest = true
              Kerberos = true
              Negotiate = true
              Certificate = true
              CredSSP = false
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          TrustedHosts
      Service
          RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
          MaxConcurrentOperations = 4294967295
          MaxConcurrentOperationsPerUser = 1500
          EnumerationTimeoutms = 240000
          MaxConnections = 300
          MaxPacketRetrievalTimeSeconds = 120
          AllowUnencrypted = true
          Auth
              Basic = true
              Kerberos = true
              Negotiate = true
              Certificate = false
              CredSSP = false
              CbtHardeningLevel = Relaxed
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          IPv4Filter = *
          IPv6Filter = *
          EnableCompatibilityHttpListener = false
          EnableCompatibilityHttpsListener = false
          CertificateThumbprint
          AllowRemoteAccess = true
      Winrs
          AllowRemoteShellAccess = true
          IdleTimeout = 7200000
          MaxConcurrentUsers = 10
          MaxShellRunTime = 2147483647
          MaxProcessesPerShell = 25
          MaxMemoryPerShellMB = 1024
          MaxShellsPerUser = 30
  
  

  PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener
  Listener
      Address = *
      Transport = HTTP
      Port = 5985
      Hostname
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  
  Listener
      Address = *
      Transport = HTTPS
      Port = 5986
      Hostname = host-vsphere.urbanvirtu.local
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  

  If I try to connect from a second server via Kerberos with HTTPS it works:

  PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password
  IdentifyResponse
      ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
      ProductVendor = Microsoft Corporation
      ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
      SecurityProfiles
          SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/
  wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h
  ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos
  

  But with the vco I:

  Name: test

  The Host/IP: Home - vsphere.urbanvirtu.local

  Port: 5986

  Type remote PowerShell: WinRM

  Transport protocol: HTTPS

  Authentication: Kerberos

  Session mode: A shared Session

  User name: administrator

  Password: password

  

  

  Someone has had this problem before? What I did wrong?

  Thanks in advance for your help.

  Best regards

  Jean

  Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.

  Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.

  This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.

  Would you please provide version of

  the PowerShell vCO plugin version

  PowerShell host - Windows Version

  PowerShell host - PowerShell version

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• problem of sudden wifi with iphone 4S

  Hello

  a few days ago, my iPhone 4S does not receive more an IP address from a DHCP server, even for all the WIFI networks, with that I use for work.

  WIFI authentication is OK, but is never received from IP (or other information received from the DHCP server).

  Someone at - he already experienced this?

  Any idea?

  Already used the 'forgotten network?' and enter the parameters for connection a couple of times, same result.

  Thank you very much

  Dominique

  Hi dofas,.

  Here are a few troubleshooting steps for the problem you are having with your Wi - Fi connection.  I've highlighted some key information.  Click on the link for more details.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  Still not connect?

  Reset your network settings. Tap Settings > General > reset > reset network settings. This resets also Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before

  • If you are connected to a Wi - Fi network, but you can't get online, try to use your Wi - Fi network on other devices. If you can't get online using your other devices, there could be an interruption of the service. Call your internet provider cable or the assistance company.
  • Try to connect to a Wi - Fi network in a different location. If your device can connect, you will need to get help with your Wi - Fi network. If it cannot connect to Wi - Fi networks, contact Apple.
  • Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Recommended settings for the WiFi routers and access points
  https://support.Apple.com/en-us/HT202068

  DHCP

  The DHCP Dynamic Host Configuration Protocol () assigns addresses that identify devices on your network. Once awarded, devices use these addresses to communicate with each other and with computers on the Internet. The functionality of a DHCP server can be considered similar to a telephone company distributing phone numbers, that clients then use to call other people.

  Value: a single DHCP server by network

  Details: There is only one DHCP server on your network. This DHCP server can be integrated into your modem cable or DSL, a stand-alone, or integrated into your router Wi - Fi router. In all cases, only one device should act as a DHCP server on your network. If several devices has activated, you will probably see to address conflicts and issues of access to the Internet or other resources on your network.

  Take care

• Add unit with VBS

  Hi, does anyone know how to add units using VBS? I added a few new channels, it will be great if I could add units with VBS directly rather than each dialog box afterwards. Thank you!

  Andi

  Thanks, I was looking for a solution for 2. case. But it s good to kill two birds with one stone. Have a nice weekend!

• do you need a power supply to the current entry with data acquisition or 9265

  Hello I just receive the NI 9265 Daq for research in my lab. I'm trying to present entry and display it on an oscilloscope. I don't get anything. I did some research on the internet, so my question is do you need a power supply to the current entry with data acquisition or 9265?

  Read the data sheet.  Clearly on the first page is a sentence which reads "the NI 9265 requires 9 V to 36 V external power.

• problems of xbox 360 with windows xp sp3 wireless receiver

  problems of xbox 360 with windows xp sp3 wireless receiver

  Hi Frank Lucas.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can see the steps outlined in the article below

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  You can also post your query on Xbox Forum

  http://forums.Xbox.com/

• Problem of automatic downloading with a security update? (KB2538242 repeatedly offered)

  original title: problem of automatic downloading with a security update?
  I'm having some trouble with the following security update?

  a security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)...

  A security issue has been identified in leading to vulnerability MFC application into DLL planting due to not specify the full path to the location/DLL MFC system.  You can protect your computer by installing this update from Microsoft.
  This update repeatedly wants to be downloaded on my computer... and I did it more than once... but again... It is said several times to download. Is this a HACK download or what?

  Thank you for your time...

  Ken Frank

  Hi Ken,

  Check if the update is installed the update history...

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  I wish that you follow the steps mentioned in the article to resolve the problem.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos