Add unit with VBS

Similar Questions

• Not able to add units in LabVIEW?

  Is it possible to add units of LabVIEW?  I found the units available in LabVIEW and one I need is not listed.  I would like to add torque (lb - ft or N - m), as well as pressure (inches H2O).  When I display the unit label under items pulled down on the front panel and then try to type "pi" for foot book or even "lb - ft" for feet as an exclamation mark books displayed in the label.  I guess this means that the units I try to enter is invalid.

  LBF ft will convert Nm.

• replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible?

  Hi guys,.

  If I could replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible? Is this possible? Please notify

  Hi Big_Dave

  Thank you for your continued support...

  Now, I replaced the in situ 300 watt power supply provided with the HP ML330 G3 with 750 watt Corsair and well. No smoke or fire smelly so that chips and salmon "I am preparing for dinner.

  Regarding your question, Yes, the size of floppy Bay is the same size as that of rpm scsi 10 k 80pin. drive it is a 80-68 pin code converter that plugs nicely into the internal water of 68 pin male. Corsair 750w PSU comes with connectors 8 x 12v morlex, these can be connected to the connectors extra 12v adapter needed to put these converters to 68pin 80 - scsi

  Daisy chaining scsi disk is easy, the two external channels can be used to connect to the scsi drive more in an another case unithaving / chasy a total of 28 scsi disk Garland.

  Everything is settled now, my only question now is to do with knowing how to configure RAID correctly and this constant warning about Battery Backed Write cache messages' on the smart card array 6400 however I'ld who post on another section of this forum. This can now be closed according to the original question with replacement of the power supply to a power greater.

• Add "open with", right click on explorer 8

  How can I add open with in the right click menu in Explorer 8?
  I want to be abe to open files like powerpoint viewer in windows live mail, which unfortunately does not open in a browser window. If I remember, IE 7 has the right click to open with.

  Because Internet Explorer is a web browser and web and web access object opbjects cannot open until they are on your own PC, a choice 'open with' is a non-sequitur.

  Brian Tillman [MVP-Outlook]

• Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Yes, assuming that you are referring to an Android table... If you are referring to Windows 8 tablet please specify.

  You can print via the local network using HP ePrint mobile app.

  Follow these guidelines to learn more about installation and usage of the app:

  http://support.HP.com/us-en/document/c01616126

  In addition you can also scan your Tablet using the HP printer control application:

  http://support.HP.com/us-en/document/c03561640

  Shlomi

• Air 1131AG - cannot access the unit with http

  I just bought two 1131AG and am not able to access the unit with Internet Explorer.

  The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either.

  The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong.

  I also have access to the consoles.

  Thanks in advance.

  Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention).

  Convert a standalone Lightweight Access Point

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version".

  Good luck.

  Please rate when useful and/or there is. Thank you.

• Is it possible to add "Open with" to context menu right click while we select several files?

  I found somw ways to add 'Open with' to the right, click pop up constantly, but I want to know if it is possible to add this option to select a group of files of the same type.

  Please guide me if I make a mistake.

  Thank you

  1. right click on the interested file called 'test1.abc '.

  2. click on 'Open with' option

  3. Select the application needed to open the file

  4. Please activate option "always use the selected program to open this type of file"

  5. click on ok

  Subsequently all "* .abc" files (test2.abc, test3.abc etc.) are opened by preferred application (selected) you in what precedes.

  ------------------------------------------------

  If this response has resolved your problem, please select this answer as a response

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

  Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

  I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

  Fixed a problem when converting the mp3 file. WAV...

  some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

• attempt to add setPropertyListener with the value of the component of type action

  Hi I'm trying to pass the value between two atribute and get this error when trying to add setPropertyListener with the type of the action value to the component that is not actionSource
  

  i what to pass this value 
  <af:inputText simple="true"
                          required="#{bindings.Username.hints.mandatory}"
                          columns="#{bindings.Username.hints.displayWidth}"
                          maximumLength="#{bindings.Username.hints.precision}"
                          shortDesc="#{bindings.Username.hints.tooltip}" id="it1"
                          value="#{bindings.Username.inputValue}">
              <f:validator binding="#{bindings.Username.validator}"/>
            </af:inputText>
  
  to hear
  <af:inputText value="#{bindings.Createdby.inputValue}"
                      label="#{bindings.Createdby.hints.label}"
                      required="#{bindings.Createdby.hints.mandatory}"
                      columns="#{bindings.Createdby.hints.displayWidth}"
                      maximumLength="#{bindings.Createdby.hints.precision}"
                      shortDesc="#{bindings.Createdby.hints.tooltip}" id="it15">
          <f:validator binding="#{bindings.Createdby.validator}"/>
          <af:setPropertyListener from="#{bindings.Username.inputValue}"
                                  to="#{bindings.Createdby.inputValue}"
                                  type="action"/>
        </af:inputText>
  
  am geting this error whenstarting application
  ]] Root cause of ServletException.
  javax.servlet.jsp.JspException: ADF_FACES-60074:attempting to add setPropertyListener with type set to action to component that is not actionSource
       at oracle.adfinternal.view.faces.taglib.listener.SetPropertyListenerTag.doStartTag(SetPropertyListenerTag.java:161)
       at jsp_servlet.__intnlusr_jsff._jspx___tag92(__intnlusr_jsff.java:4280)
       at jsp_servlet.__intnlusr_jsff._jspx___tag90(__intnlusr_jsff.java:4207)
       at jsp_servlet.__intnlusr_jsff._jspx___tag89(__intnlusr_jsff.java:4136)
       at jsp_servlet.__intnlusr_jsff._jspService(__intnlusr_jsff.java:441)
       at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
       at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
       at java.security.AccessController.doPrivileged(Native Method)
       at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
       at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
       at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
       at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
       at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
       at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
       at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
       at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
       at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
       at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
       at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
       at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:503)
       at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
       at jsp_servlet.__index_jspx._jspx___tag3(__index_jspx.java:243)
       at jsp_servlet.__index_jspx._jspx___tag2(__index_jspx.java:204)
       at jsp_servlet.__index_jspx._jspx___tag1(__index_jspx.java:154)
       at jsp_servlet.__index_jspx._jspx___tag0(__index_jspx.java:104)
       at jsp_servlet.__index_jspx._jspService(__index_jspx.java:65)
       at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
       at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
       at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
       at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
       at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
       at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
       at oracle.adfinternal.view.faces.config.rich.RecordRequestAttributesDuringDispatch.dispatch(RecordRequestAttributesDuringDispatch.java:44)
       at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
       at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
       at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
       at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
       at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
       at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
       at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
       at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
       at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
       at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
       at java.security.AccessController.doPrivileged(Native Method)
       at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
       at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
       at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
       at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
       at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
       at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
       at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
       at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
       at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
       at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
       at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
       at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
   SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = srd-ws23042 TXID =  CONTEXTID = 7157afcc9f9dbb93:-87c28d8:13e8d11ba6b:-8000-00000000000000b7 TIMESTAMP = 1368169642621  
  WatchAlarmType: AutomaticReset 
  WatchAlarmResetPeriod: 30000 
  >
  <10 May 2013 9:07:23 AM> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\10017134\appdata\roaming\jdeveloper\system11.1.1.6.38.61.92\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_83 with a lockout minute period of 1.> 
  
  i what to pass some value from one view to another,for example when i create username in view user i must go and populate that username in view userlogs in field createdby

  Edited by: adf009 2013/05/10 10:19

  No, you the code you show here is not the right way to do it!
  You did a simple copy & past errors telling me that you don't understand what you copy everything.

  valueChangeListener="#{pageFlowScope.InternalUserBean.valueChanged}">
  

  does not point to the valueChangeListener in the bena as this one is called "changeUserListener"!
  A simple code debugging session would have shown this.

  Timo

• How is it that I can't install muse-add-on with the extension manager?

  I downloaded the add-on for adobe muse. I couldn't add it via the library panel. In creative cloud, I tried to score "sync files", but for some reason I can't jump allways return to "sync files off. So I tried to add the add-on with the extensions Manager. Here, I get the message: see screenshot. I also wonder why adobe muse is not in the list of extensions Manager products?

  Thanks for help

  

  1 extension Manager does not support Muse.

  2. If the Add on downloaded file is a file ZXP, you must use the latest version of the CC extensions Manager.

• AdvancedDataGrid - add columns with ActionScript

  I am trying to add columns in an AdvancedDataGrid via ActionScript.

  I can't make it work.

  I tried two approaches - with an intermediary table to store the columns then set the adg in table columns; One where I assign columns directly to the table of columns of the adg.

  They are likely to fail in their own way.  The columns don't "take" and the adg uses the default values for dataProviders, or there are no columns at all.

  "adg_test.mxml" has the code AdvancedDataGrids. 

  'adg_test_renderer.mxml' is a rendering engine for one of the columns.

  Would appreciate learning what I'm doing wrong.

  Thanks for any help.

  = Adg_test_renderer.mxml START =.

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:VBox ' http://www.Adobe.com/2006/MXML ">
  < mx:Button id = "btnTest" label = "Working Renderer" / >
  < / mx:VBox >

  = Adg_test_renderer.mxml END =.

  == Adg_test.mxml START =.

  <? XML version = "1.0"? >
  < mx:Application
  ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "
  Initialize = "init ()" >

  < mx:Script >
  <! [CDATA]
  Import mx.collections.ArrayCollection;
  
  [Bindable]
  private var dpADGExplicit:ArrayCollection = new ArrayCollection([)
  {Artist: 'Pavement', Album: 'Slanted and enchanted', price: 11.99},.
  {Artist: 'Pavement', Album: 'Brighten the corners', price: 11.99},.
  {Artist: 'Saner', Album: 'A child once', price: 11.99},.
  {Artist: 'Saner', Album: 'Helium wings', price: 12.99},.
  {Artist: 'The doors', Album: 'The doors', price: 10.99},.
  {Artist: 'The doors', Album: "Morrison hotel", price: 12.99},.
  {Artist: 'Grateful Dead', Album: 'American Beauty', price: 11.99},.
  {Artist: 'Grateful Dead', Album: 'In the Dark', price: 11.99},.
  {Artist: 'Grateful Dead', Album: 'Shakedown Street', price: 11.99},.
  {Artist: 'The doors', Album: 'Strange Days', price: 12.99},.
  {Artist: 'The doors', Album: 'The best of the doors', price: 10.99}
  ]);
  
  [Bindable]
  private var dpADGActionScript:ArrayCollection = new ArrayCollection([)
  {Artist: 'Pavement', Album: 'Slanted and enchanted', price: 11.99},.
  {Artist: 'Pavement', Album: 'Brighten the corners', price: 11.99},.
  {Artist: 'Saner', Album: 'A child once', price: 11.99},.
  {Artist: 'Saner', Album: 'Helium wings', price: 12.99},.
  {Artist: 'The doors', Album: 'The doors', price: 10.99},.
  {Artist: 'The doors', Album: "Morrison hotel", price: 12.99},.
  {Artist: 'Grateful Dead', Album: 'American Beauty', price: 11.99},.
  {Artist: 'Grateful Dead', Album: 'In the Dark', price: 11.99},.
  {Artist: 'Grateful Dead', Album: 'Shakedown Street', price: 11.99},.
  {Artist: 'The doors', Album: 'Strange Days', price: 12.99},.
  {Artist: 'The doors', Album: 'The best of the doors', price: 10.99}
  ]);
  
  private function init (): void
  {
  var arr:Array = []; table of //Intermediary which became the AdvancedDataGridColumn table
  var col: AdvancedDataGridColumn = new AdvancedDataGridColumn();

  col.dataField = "artist";
  arr.push (col);
  
  col.dataField = 'Album ';
  Col.Visible = false;
  arr.push (col);
  
  col.dataField = "Price";
  col.itemRenderer = new ClassFactory (adg_test_renderer);
  arr.push (col);
  
  adgActionScript.columns = arr;
  
  UNSUCCESSFUL ALTERNATIVE APPROACH
  
  /*
  col.dataField = "artist";
  adgActionScript.columns.push (col);
  
  col.dataField = 'Album ';
  Col.Visible = false;
  adgActionScript.columns.push (col);
  
  col.dataField = "Price";
  col.itemRenderer = new ClassFactory (adg_test_renderer);
  adgActionScript.columns.push (col);
  */
  }
  
  []] >
  < / mx:Script >

  < mx:Label text = "Explicit columns" / >
  
  < mx:AdvancedDataGrid
  ID = "adgExplicit".
  Width = "100%" height = "100%".
  sortExpertMode = "true".
  dataProvider = "{dpADGExplicit}" >
  < mx:columns >
  < mx:AdvancedDataGridColumn dataField = "Artist" / >
  < mx:AdvancedDataGridColumn dataField = "Album" visible = "false" / >
  < mx:AdvancedDataGridColumn dataField = "Price" itemRenderer = "adg_test_renderer" / >
  < / mx:columns >
  < / mx:AdvancedDataGrid >
  
  < mx:Label text = "columns ActionScript (ActionScript so works: Arist column should be hidden.)" Should see Album with data columns and price with the buttons. / >
  
  < mx:AdvancedDataGrid
  ID = "adgActionScript".
  Width = "100%" height = "100%".
  sortExpertMode = "true".
  dataProvider = "{dpADGActionScript}" >
  < / mx:AdvancedDataGrid >
  
  < / mx:Application >

  == Adg_test.mxml END =.

  If you are looking to add columns with ActionScript, follow this.

  var _advancedDataGrid: AdvancedDataGrid = new AdvancedDataGrid();

  var columns: Array = _advancedDataGrid.columns;

  Columns.push (new AdvancedDataGridColumn ('field1'));

  Columns.push (new AdvancedDataGridColumn ('field2'));

  Columns.push (new AdvancedDataGridColumn ('field3'));

  _advancedDataGrid.columns = columns;

  _advancedDataGrid.validateNow ();

• How to add a logic unit with an existing data store number

  I have a logic unit number I replicated from a SAN at a data center in a SAN to another data center. I want to map this LUN to a cluster of ESX 4 and use the store of existing data on the LUN to recover the virtual machines it contains. What is the best way to do it? Guests will see the existing data store, when I rescan HBAS or y at - it a trick to add a data store existing cluster?

  It's a separate LUN on a different SAN mapped to another set of hosts. Once I have a new analysis for the new LUNS and data warehouses, store data on this LUN will display in the list of data stores to then browse data warehouses and register virtual machines on it?  Or still do I add storage and first select the existing data store?

  Given that the hosts did not see the original LUN before, the data store should appear just after the new analysis.

  André

• Unit with several banks of messages?

  I currently have a 4.0 with UNIFIED Messaging Unit box with an Exchange 5.5 store out of area message. I am trying to add an Exchange 2003 server to serve additional users and would like to have the point of unity for 5.5 and Server 2003 as UNIFIED Messaging message stores.

  Is this possible? I can't find any documentation to support although I see some users on the forums do the same thing. Can someone point me to the correct configuration guides?

  There are several links to the information you asked so I started with the simplest first.

  Upgrading Exchange 5.5 with Active Directory and Exchange 2003 or Exchange 2000 for Cisco Unity 4.x without failover

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a8b.html#wp1260638

• Firefox tab disappeared, have mysearchdial. No program of mysearchdial in installed programs impossible to uninstall. no way to manage add-ons with or without tab firefox orange

  Could not find a way to get rid of mysearchdial. no tab orange browser firefox so can't get to manage no Add ons and any program mysearchdial in the installed programs in Control Panel, so it is impossible to uninstall.

  tried to change the home page but no matter what I do, mysearch dial remains there. went to mysearchdial web page, followed their instructions, no use. Tried to run malwarebytes anti-malware and it has not seen anything like that. my browser opens really slow. The Microsoft Security Essentials is not helping either. I tried booting from the ERD, start did not find any problem. the search on my computer for mysearchdial or something unknown shows nothing. ran put utilities at the point in the registry, found nothing.

  What should I try next? Thank you very much.

  Hello

  The easiest way is probably to make a Reset of Firefox. This will return Firefox to its default settings. Your personal data (bookmarks, history, etc.) will be saved, but you will have to reinstall all your addons.

  Firefox - modules to reset and refresh settings

  If you don't arrive in the Firefox Orange menu to do the reset and then close Firefox and then hold down the SHIFT key while you open it. This will bring up a menu that gives you the ability to reset Firefox.

  The problem is that (as you've identified) there is a chance that Firefox will get hijacked again if you are unable to remove malware from your computer.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  I also suggest looking at the list of programs for starting and turning off one you don't want to or don't recognize. All that is originally from the diversion of mysearchdial is likely to be listed in the startup list, because he wants to run as soon as the computer starts.

  I hope this helps. Let me know if not.