Problem in HEX display

Similar Questions

• Driver problems Portege 3440 Display (screen 2)

  Hello to the entire community.
  I hope that you will understand my post and will have problems too big to understand. I come from Germany.

  The Toshiba is a very wonderful laptop. But since I've updated it to Win98Se too Windows 2000 I have a problem with the display driver. I want to extend my desktop to an external display. It was no problem under Win98Se. But with Win 2000 Sp3, I did not work. I dry a lot of pilots divernt. Of course also pilots the support page. In the displayproperties, I choose S3DuoView, but it does not work. The internal and externel display with the same image is no problem. But I want separate images, for example with PowerPoint or only to have more desktop space.
  Have someone 3440 with Win2000 one lasting two screens.
  Temporarily 5.12.01.7048 hypotheek version is 'working '.
  A new installation does not help. The same problem apears.

  Thank you for reading this long text.
  Greetings Spothuhn

  Hello

  I guess you want to turn on the extended desktop on your Portege.
  You suggested that the 5.12.01.7048 driver graphic works.
  On the page of the Toshiba driver I found 2 different drivers for S3.
  A version is 7.31.26 and the other driver is 5.12.1.7009.
  I think the version 5.12 is a little older. In this case try to install the 7,31 driver version. It would be very interesting to know if it will be useful.

  What version of BIOS you have installed on the device? The latest version is 1.6.
  Maybe the newest BIOS will help you.

  Good bye

• Satellite A660 - display problems, very dark display

  Hello

  I'm at the end of help please.

  I have a Toshiba Satellite A660 PSAW3A-07P00R.

  recently, it has been very, very dark display on the screen, almost impossible to see.
  I tried the following the problem solved.

  1. set the brightness to the MAX in the operating system, power management, etc.
  2 reset the BIOS to default settings.
  3. set the brightness to the MAX on the laptop brightness settings.
  4. check the external display via a VGA cable. tested ok.
  5. I bought a new LED 16 "screen but the new screen has the same problems. If I understand correctly, LED screens (1 data cable video on the bottom of the screen to connect to the motherboard) have the "inverter" built into the display, so appears not to be a problem of map display, brightness or graphics. I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  is there something easy, I missed, or something I have not tried?
  has anyone else experienced this problem and solved?

  Thank you in advance.

  > I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  As much as I know there is no FL inverter then, or you can override the display or the cable (LCD/FL)
  LVDS cable) with a new one and the test shows again.
  I found a compatible: K000103140 LVDS CABLE

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• Problem access to Windows update, error: site has encountered a problem and cannot display the page you are trying to view.

  Original title: problem accessing Windows update.

  I just reinstalled a pre - SP3 of XP version. When I tried to download the SP3 I got the message: the site has encountered a problem and cannot display the page you are trying to view. I don't know what to do. Help, anyone?

  Download the following:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (Service Pack 2)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 (Service Pack 3)

  Ignore warnings about these packages for computer scientists, or only of the
  too much network installs and others.  These are full Service Packs which can
  be installed without an internet connection or when no other SPs are
  installed.   Install SP2 first, followed by SP3.

  NOTE: If SP2 is already installed on your computer, or if the SP1a is installed, go straight to the Service Pack 3 package.

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• The website has encountered a problem and cannot display the page you are trying to view.

  Original title: whe I go to windows updates, I get this message, the website has encountered a problem and cannot display the page you are trying to view.

  The website has encountered a problem and cannot display the page you are trying to view.

  Hello

  It would help if you could answer these questions in order to solve the problem.

  -What service pack is installed on the computer?

  -You receive an error with the error code?

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and type Winver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below.

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24

  Note: You can ignore the it professional and network installation warning.

  Follow the steps in http://support.microsoft.com/kb/883614 to ensure that the smart Service in the background and the automatic update service is started.

  If the services are present and are running, then try to reset the Internet Explorer settings and check if it helps.

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Let us know if the steps help or if you have any questions.

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.

• Cannot upgrade to SP3 after a fresh install of XP. Gets the error while accessing the Windows Update page: "the site has encountered a problem and cannot display the page you are trying view."

  Original title: install SP3

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  Just install Windows XP SP3 manually...

  Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.