Problem in the case of storage expansion

Similar Questions

• Problem with the integration of storage - suspicious on PALO adapters

  Hello

  I connect the UCS system storage with mds9124 between the two.

  So far, I joined 2 systems UCS, everything went smoothly.

  Now, the new system UCS arrived, it's the same as before, the only difference is that now we have PALO for the first time.

  Stanard configuration, service profiles, uplinks, etc and now I have a strange situation

  The MDS ports connected to ports of uplink CF on my 6120xp I don't see pwwn to my profile, only WWNs of ports uplink and vsan wwn connected service.

  NPIV is enabled of course, I tried to recreate the profiles to change wwpn-s pools, but no use UCS,... no configuration issues, the ports are on the rise, the associated service profiles... I'm really confused.

  I checked my setup with cisco guides ("design and deployment of a Cisco Unified Computing System SAN using MDS 9000 family switches Cisco"), but I don't see why it does not work.

  Any idea? In past configurations with MENLO adapters, everything went really good.

  Thank you

  It's the way palo works. You will see not Palo connect on the fabric until the drivers are loaded. In the case of SAN boot you need to create a specific boot strategy that assigns the logical unit number to the vhba and in this case, it is programmed and connection to the fabric for SAN boot.

  If you're just turn the blade and expecting Palo to connect on the fabric as a Menlo or Qlogic it won't do.

  Louis

• Dead pixel blackBerry Smartphones and the problem with the case of my BlackBerry 9780

  Hello world

  Recently, I bought a BlackBerry 9780 by Vodafone Spain (23 December) and I found a few problems.

  One of them is the presence of a dead pixel in the upper right and the feeling of the case a little weak in the left side that, when you touch it you can feel it creaks a bit.

  I would like to know if the warranty of BlackBerry or Vodafone Spain will cover this problem or if some of the new users of this model of BlackBerry noticied some of these problems and knows how to solve this problem.

  Sorry if they have problems with spelling. My usual language is Spanish .

  Thank you very much.

  A dead pixel is a hardware fault, and there is no miracle for her.

  Check if you can get a replacement.

• Problem with the importation and storage of library

  I have sewing miss the logic in the import and storage of the photos in the library. This causes a situation that whenever I need a picture I need to go to C: and import it. My library is almost empty and I don't see how the images can be stored. In any case, this has created situations where I open the import window and I can see the pictures, but I can't access somehow? I get same messages telling me that there is that a dublicate somewhere, but where, remains a mystery. I am so set on logic in windows to manage and store files and which confuses me maybe? Is there a tutorial "how to import and store your images in Lightroom? Enlighten me about the logic of this.

  Thank you

  Lightroom is a database; not a file browser. A file Explorer "focuses on" your records, sees that the pictures are here and allows you to work with them. Lightroom does not. He knows only the photos that have been imported into Lightroom. Once the photo is imported into Lightroom, then Lightroom knows the location of the photo and it's metadata and you can perform tasks (such as editing on the photo). At no time does Lightroom contains your photo. At no time Lightroom stores your photo. But since it is not a file Explorer, if you move or rename or delete the photo outside of Lightroom, then Lightroom no longer knows where's the picture (it is not a file browser) and if the photo is reported as missing (it has a question mark icon) and you can no longer perform tasks on this photo.

  Therefore, once you import a photo in Lightroom, you must perform all the management of this photo of in Lightroom. This means do not move or rename or delete the photo in your operating system or another program. You will need to browse/search the photo in Lightroom, not your operating system. All the actions performed on the photo must be done in Lightroom.

  Why? A database allows you to organize in a way that is not possible (or possible but very difficult) to do in your operating system. The main tool of organization ensuring (in my opinion) by Lightroom's keywords. Keywords and other metadata (captions, titles, collections, etc.) give you the opportunity to organize in ways that folder organization cannot reach.

  In addition, Lightroom allows you to simplify your workflow (if you want). My workflow is very simple. In my workflow, there is no need to move photos from here to there, to reach the organization. A photo comes out a camera and is placed in a folder by default (by date of capture), and he never moves out of this folder again. Instead, I use the keywords and other metadata to enable me to quickly find my photos, and another advantage is that I don't no need to know the pictures are found in the folder. With 22000 photos, I just can't remember what they are stored in folders - it is a task that is impossible for me to do. However, I can find any photo quickly; for example, if the content of the photo is a skyscraper, I simply tell Lightroom to find all my photos that have the keyword "skyscraper" and Lightroom will find that almost instantly and I didn't even have to know which folder the file was in. It is difficult for me to imagine a simple workflow.

  Note: you can continue to use the files as a method of organization, you don't have to use keywords, but you must "respect the rules of Lightroom" and use Lightroom to move pictures from here to there, and you must use the methods of Lightroom to rename your photos; etc. And of course, if your organization only be made via the files and folders, you do not get profits of keywords and other metadata.

  Then, I suggest you do the following with your workflow:

  Import photos into Lightroom once and only once. After that, there are all the management of the pictures that have been imported into Lightroom. Photos should be assigned keywords as appropriate and enter captions, titles and other metadata. All the searching and browsing of photos that were imported should be made in Lightroom, preferably using keywords and other metadata.

  References:

  http://forums.Adobe.com/docs/doc-3682

  http://TV.Adobe.com/watch/getting-started-with-Adobe-Photoshop-Lightroom-5/Lightroom-5-IMP orting your images.

  http://TV.Adobe.com/watch/getting-started-with-Adobe-Photoshop-Lightroom-5/Lightroom-5-org anizing-your-pictures.

• Problem with the case where the clause

  Hello

  I want to use cases in which clause. I wrote a very simple query to test how it works. However, I always got an error message. Here's what I did.

  Select eid, firstname, lastname from employee where eid = 1 works fine

  Select eid, name, name of the employee

  where

  cases where 1 = 1 then eid = 1

  When 1! = 1 then eid = 2

  end

  I ORA-00905: lack of keyword.

  Did I miss something?

  Thank you

  Jennifer

  Hi, Jennifer.

  Why do you want to use BOX in a WHERE clause?  The wonderful thing about the CASE is that it allows you to do IF-THEN-ELSE logic.  In a SELECT clause, or an ORDER BY clause, this is really useful, but the WHERE clause already allows you to use the IF-THEN-ELSE logic.

  However, if you use the BOX in a WHERE clause, it is as it does nowhere else.  Always BARGAIN instead of a single expression in a SQL data types.  All the clauses THEN (and ELSE, if there is one) must return a single expression, such as the NUMBER.  (There is no BOOLEAN data type in SQL).  So, you can use a CASE statement like this:

  ...

  CASES WHERE

  WHEN 1 = 1 THEN 1

  WHEN 1! = 1 THEN 2

  END = eid

  Here, the CASE expression takes the place of a NUMBER.

  However, if I was not sure if 1 = 1 or not, I would write the condition in this way, without a CASE expression:

  WHERE (1 = 1 AND eid = 1)

  OR (1! = 1 AND eid = 2).

• Problem of the CASE statement

  Hi all
  
  I need to replace the value selected,
  
  Here's the query... make a mistake... make me ORA-00923: KEYWORD not found or provided.
  
  Could you please correct me.
  
  SELECT sper.assettxt =
  CASE
  WHEN (select description of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
  and flv.description = sper.assettxt);
  (select the meaning of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
  and flv.description = sper.assettxt)
  NVL (resp_cat. (Text, 'Total');
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 24 h, sper.total, 0)), 0) day1.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 48 but > 24', sper.total, 0)), 0) day2.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 72 but > 48', sper.total, 0)), 0) day 3,.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' > 72 h, sper.total, 0)), 0) day4.
  NVL (SUM (DECODE (sper.author_create_ta_interval, "N/a", sper.total, 0)), 0) 'open ',.
  NVL (SUM (sper.total), 0) "Grand Total".
  (SELECT "point proven" TEXT data)
  OF THE DOUBLE
  UNION
  SELECT "data updated item.
  OF THE DOUBLE
  UNION
  SELECT "other answers.
  Resp_cat FROM DUAL)
  LEFT OUTER JOIN
  (SELECT assettxt,
  s.sper_status_text,
  s.author_create_ta_interval,
  Total COUNT (*)
  OF s zzcus.zzcus_sper_data
  WHERE 1 = 1
  AND s.sper_dates =: P_SR_DATES
  AND s.sper_month = substr(:P_SR_DATES,5,2)
  AND s.customer_id =: P_CUSTOMER_ID
  - AND s.task_inquiry_type AS ' descriptive data Challenge %.
  AND s.assettxt <>'! MAD
  S.assettxt, s.sper_status_text, s.author_create_ta_interval)
  SPER partition by (SPER. ASSETTXT)
  ((CASE
  WHEN sper.sper_status_text = "data confirmed."
  THEN
  "Question confirmed the data.
  WHEN sper.sper_status_text = "updating data"
  THEN
  "Item updated data.
  ON THE OTHER
  "Other answers.
  END) = resp_cat.text)
  GROUP BY ROLLUP (resp_cat.text), sper.assettxt
  ORDER BY sper.assettxt, (CASE resp_cat.text
  WHEN 'confirmed data element' THEN 1
  WHEN 'updated data element' THEN 2
  WHEN "Others" THEN 3
  END)
  
  
  
  
  I need to replace sper.assettxt with the meaning of fnd_lookup_values table.
  
  
  
  
  -

  Well, it is interpretation since I'm guessing by your intention with the CASE statement.

  Do you mean

  CASE
  WHEN EXISTS
     (
        SELECT
           description
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
     THEN
     (
        SELECT
           meaning
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
  END, 
  

  If yes then it is much better represented as

     (
        SELECT
           meaning
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
  

  Assuming that the code returns 0 - 1 line (no more and you will get an error).

• Problem with the release of storage refcursor

  declare
  v_sql varchar2 (1000);
  News sys_refcursor;
  v_output varchar2 (32676);
  Start
  v_sql: = 'select empno, ename from emp;
  Open the heart of v_sql;
  loop
  News of FETCH in v_output;
  dbms_output.put_line (v_output);
  When the output cur % notfound;
  end loop;
  News closr;
  end;
  
  Oracle is not able to store the output of cursor in v_output (varchar2). How to store the output of refcursor in varchar2

  To start with, your code has syntax error. You did not run your oracle code and blame for not doing his job.
  See below the code that gets the cursor to the variable output. I hope that's what you're looking for.

  SQL> set serveroutput on
  SQL> ed
  Wrote file afiedt.buf
  
    1  declare
    2  v_sql varchar2(1000);
    3  cur sys_refcursor;
    4  v_output varchar2(32676);
    5  begin
    6  v_sql := 'select ename from emp';
    7  open cur for v_sql;
    8  loop
    9  fetch cur into v_output;
   10  dbms_output.put_line(v_output);
   11  exit when cur%notfound;
   12  end loop;
   13  close cur;
   14* end;
  SQL> /
  smith
  smith
  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER
  MILLER
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• The problem in the #0187277767 case could resolve yet?

  The problem in the case #0187277767 been solve yet?

  Hi stepheng26424983,

  The problem has been reported as a bug & engineering team works as a priority to fix. We expect to fix in a week.

  You will be notified accordingly.

  Kind regards
  Nicos

• Problems with the plugin plugInModeGray32 imageMode import format?

  Hi people,

  I have a format plugin where I have everything works fine with plugInModeGray16 to import, but I would really eventually have more precision. If I try

  	formatRecord-> imageMode = plugInModeGray32;
  	formatRecord-> depth = 32;

  He throws up, even if I actually do not set the buffers. With the help of pluginModeGray16 and not affecting don't not tampons gets me a picture empty but dimensioned correctly. Is there a limitation with do import 32-bit files?

  Reference, I saw on another thread a few years back where someone couldn't use plugInModeRGB96 and was falling back to plugInModeRGB48 for the contents of 32-bit so it seems that there is something that you can travel there, but nothing in the thread suggested a solution.

  Thank you

  Eric

  So I did some more research and found the problem in the case of other successes for the. Even through pluginModeGray16 is what is expected, Photoshop do not like plugInModeGray32 and really wants that you just use plugInModeGrayScale;

  	formatRecord-> imageMode = plugInModeGrayScale;
  	formatRecord-> depth = 32;

  I have not tried, but I suspect the other dev having problems with plugInModeRGB96 might be the same problem. Just use RGB and set the 32-bit/channel in the depth.

  Kind regards

  Eric

• Duplicate values are returned by using the case statement

  Hello PL/SQL gurus and experts.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  
  I am currently stuk with problem with the case values in double - displayign
  
  Once I am using the following query (join of two tables)
  

  select t.student_nm,
  f.Test_RNK,f.Exam_rnk
  from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'

  It gives the student name and corresponding test and review
  
  But if I use it as a query, then it displays a lot of values in double.
  

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 

  I can do stupid mistake but kindly suggest me.
  
  Thank you

  Why you have removed the bottom two filters in the second query?

  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  CASE filter your data. USED in your SELECTION list will be only to manipulate these data for the particular column.
  You must keep your filter because it is, if you expect the reords even to return

  Your request must therefore

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  Published by: JAC on October 12, 2012 19:08
  1. is it a running query? You use DATE as column name?
  2. why you store data to date as strings?

• Problem with the Db link

  Hi Experts,
  
  I am facing a problem with Dblink
  
  AMT OF remote Db
  

  X1 =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = ABC.DEF.COM)(PORT = XXXX)))
      (CONNECT_DATA = (SID = X1)))

  Local Db AMT
  

   
  X2 =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = XYZ.DEF.COM)(PORT = YYYYY))
      )
      (CONNECT_DATA =
        (SID = ELF)
        (GLOBAL_NAME = ELF.world)
      )
    )

  I am able to connect to X 1 with the id user USR & PWD password
  
  However, when I create db link
  

   
  create database link L1
  connect to USR
  identified by PWD
  using 'X1'

  It is created, however when I test, he says the invalid user id and password
  
  Please let me know what I am doing wrong
  
  Thanks in advance
  Kind regards
  
  Published by: 34MCA2K2 on July 11, 2012 08:37
  
  Published by: 34MCA2K2 on July 11, 2012 09:18

  Please refer to this http://lihaobin.com/?p=78

  Maybe a problem with the case-sensitive password

• What is the difference between the iCloud, which I used on my two mac computers and that I have now with the 6splus of the iPhone? Never had a problem with the storage until I bought the iPhone (former android user).

  I've been using a mac mini to work (my church) and recently I bought a macbook. The iCloud is my favorite piece of this puzzle so I thought I would be nice to add an iPhone - now I use constantly questions with storage on my iPhone. So why now I have an iPhone that is changing my storage capacity?

  It is not clear to me if you have a problem of storage on your iPhone or in iCloud. You can go to settings > general > storage & use of iCloud. Note that there are then 2 sections on this screen - storage (which is on your phone) and iCloud. Each section has a storage management where you can see more details.

  If the problem is the iCloud storage, the following may be useful: manage your iCloud - Apple Support storage space

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

• problem of data flow in the case structures (using a state machine)

  Good day everyone.

  I'm having a problem with the flow of data between the structures of the case.

  I try to use an example of a state machine for this simple problem. but when I try to send data of a box structure to change the State of the code. It will change not in the desirable output, instead, it offers the possibility that the exit options emul.

  could someone please point what I'm doing wrong here. Any kind of help would be very appreciated.

  With a quick glance at your photos a question you have is that you use not data flow. You write your status updated in local variables value. Your State should pass through the case structures are a single wire. Playback of your order "Enum", happened in the register shift on the right side of your loop probably get running and reading before any processing occurs within the structure of your business. That's why you're reading the old value of the State and not the update. or have a classic case of a race condition in your code.