problem in the control file created by file LKM to Oracle (SQLLDR)

Similar Questions

• Problem to identify the control file when creating physical standby

  Hello
  
  (database version: 10.2.0.4)
  linux platform)
  
  I use the command below to create physical database from a backup before:
  

  rman target / auxiliary sys/tiger@paceview
  
  Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  connected to target database: PACEVIEW (DBID=2092349485)
  connected to auxiliary database: PACEVIEW (not mounted)
  
   run {
   allocate auxiliary channel c1 device type DISK;
   set until sequence 38;
   duplicate target database for standby dorecover nofilenamecheck;
   }
  
  
  released channel: ORA_DISK_1
  allocated channel: c1
  channel c1: sid=35 devtype=DISK
  
  allocated channel: c2
  channel c2: sid=36 devtype=DISK
  
  executing command: SET until clause
  
  Starting Duplicate Db at 04-SEP-12
  
  contents of Memory Script:
  {
     set until scn  138180211934;
     restore clone standby controlfile;
     sql clone 'alter database mount standby database';
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting restore at 04-SEP-12
  
  channel c1: restoring control file
  ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  ORA-19600: input file is control file  (/backup/rman/paceview/DEL1_standby.ctl)
  ORA-19601: output file is control file  (/PGHProdDB/oradata/paceview/control1.ctl)
  failover to previous backup
  
  released channel: c1
  released channel: c2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06024: no backup or copy of the control file found to restore

  I already tried to cross but always give same error
  Thank you

  Hello;

  That's what I'd do:

  Primary backup (change in your directory as needed)

  RMAN RUN {
  allocate channel d1 type disk;
  backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
  sql 'alter system archive log current';
  backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
  backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
  release channel d1;
  }
  

  Move the backup and duplicate like this:

  rman target sys/password@PRIMARY auxiliary /
  
  RMAN> run {
  allocate channel C1 device type disk;
  allocate auxiliary channel C2 device type disk;
  duplicate target database for standby nofilenamecheck;
  }
  

  For details of this method, see:

  http://www.Visi.com/~mseberg/duprman2.html

  Best regards

  mseberg

• Impossible to copy the control file.

  Hi everyone, I am trying to clone my database and get this error when you try to copy the control file.  I apologize if it's very beginner to here but I'm really stuck and need a hand!  Thank you.

  SQL > @D:\oracle\product\test\cloneinfo\test_ctl.sql

  ORA-01081: cannot start already running ORACLE - he stop first

  CREATE CONTROLFILE SET DATABASE "mediated" RESETLOGS ARCHIVELOG

  *

  ERROR on line 1:

  ORA-01503: CREATE CONTROLFILE failed

  ORA-00200: control file could not be created

  ORA-00202: control file: ' D:\ORACLE\PRODUCT\ORADATA\TEST\TEST_CONTROL01. CTL'

  ORA-27038: created file already exists

  OSD-04010: < create > option specified, the file already exists

  START: RECNO: = SYS. DBMS_BACKUP_RESTORE. SETCONFIG ("CONTROLFILE AUTOBACKUP', 'ON'")

  ; END;

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_BACKUP_RESTORE ', line 4400

  ORA-06512: at line 1

  ALTER DATABASE OPEN RESETLOGS

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  SQL > select name from v$ datafile

  2;

  Select name from v$ datafile

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  Each of us has started early, don't worry.

  (1) analyze the errors:

  ORA-01081: cannot start already running ORACLE - he stop first

  your database are open? Check it with--> sqlplus > select status from v$ instance;

  (2) following error:

  ORA-00202: control file: ' D:\ORACLE\PRODUCT\ORADATA\TEST\TEST_CONTROL01. CTL'

  ORA-27038: created file already exists

  OSD-04010: option specified, file already exists

  Explain to: https://forums.oracle.com/message/9629124

  (3) to create controlfile your database should be in status "Nomount". So:

  SQL > shutdown immediate;

  SQL > startup nomount;

  4) more info on: CREATE CONTROLFILE

  If you have more problems, let us know.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• How can I specify location of the control file when the manual creation of DB?

  DB version: 11.2.0.4

  OS: Oracle Linux 6.6

  The CREATE DATABASE command creates the control file.

  CREATE DATABASE command is executed once you start the instance in NOMOUNT State as shown below.

  SQL > startup nomount pfile=$ORACLE_HOME/dbs/initBRCPRD.ora

  SQL > create database 'BRCPRD '.

  MaxInstances 32

  MAXLOGHISTORY 1

  maxLogFiles 192

  maxlogmembers 3

  ..

  .

  .

  < snipped >

  When you create the database manually, we can define the control_files parameter in the init.ora as below and control file will be created at this location. Right?

  control_files = ("" / u01/oradata/BRCPRD/BRCPRD_control01.ctl","/u01/oradata/BRCPRD/BRCPRD_control02.ctl "")

  When I was generating the DB using DBCA GUI creation scripts, it asks to enter the location of the Online redo logs and control files.

  I entered my desired location. But, I couldn't find CONTROL_FILES parameter in the init.ora file generated the DBCA. This is why I got confused. I think that DBCA is internally somehow. So thought I'd post it here.

  Hi John, OP

  Just checked the init.ora file created by DBCA. Although the parameter CONTROL_FILES is undefined, db_create_file_dest = '+ DATA_DG1' was created. OMF default location is defined by the db_create_file_dest parameter.

  So, I could safely use this script for the manual creation of DB, and during the CREATE DATABASE command execution, oracle will place CONTROL_FILES + DATA_DG1 using the format;

  +DiskGroup/dbname/filetype/filetypetag.file.incarnation

• ORA-00221: error on write in the control file

  Experts,

  Recently, I have been unable to connect to the console em12c and after reviewing the State of who, I got to know that my instance of database crashed.

  Status of the WHO
  . / emctl status SGD Oracle Enterprise Manager Cloud control 12 c Release 2 Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved. WebTier is in place Oracle Management Server does not work for the following reason: Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.

  I connected and checked the alert log which was below error e/s on the controlfile. I'm afraid to say that my control files are multiplexed not and I don't have a valid backup of controlfile.

  alert_log

  Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_lgwr_25655.trc file: ORA-00345: redo log write error block 39818 County 15 ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/TRCOEM/redo01.log' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 39818 Additional information:-1 Kill Jan 28 11:34:57 2014 Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file: ORA-00206: error in writing (block 3, block # 1) of the control file ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 3 Additional information:-1 Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file: ORA-00221: error about writing about a control file ORA-00206: error in writing (block 3, block # 1) of the control file ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 3 Additional information:-1 Kill Jan 28 11:34:57 2014 CKPT (ospid: 25659): put an end to litigation because of the error 221

  Please help me what should be the solution to fix this error. Is this just a mistake of e/s on the controlfile, or do I have a disk failure?

  var http://www.filedropper.com/messages

  Version of the OS: RHEL 5 (64-bit)

  Database Version: 11.2.0.3 (64-bit)

  Thank you

  Fran,

  Syslog does not display the IO error.

  I followed the steps below to solve the problem.

  1] stop the database

  [2] restore control01.dbf to the backup location.

  [3] mount the database
  [4] recover database until cancel

  [5] Alter database open resetlogs.

  Also, takes a full cold of RMAN backup of the database, the multiplex control files and recovery logs.

• How can I validate the data in the control file?

  Consider that the SQLLoader reads the data entry of the path file and loads the data in the base tables up on top of the description specified in the control file.
  First, the form is created:
  
  create table sql_loader_1 (load_time date, digital Champ_1, Champ_2 varchar2 (10))
  Example of control file:
  load_1.CTL
  
  load data
  INFILE "load_1.dat", "str"\r\n"
  insert into table sql_loader_1
  (
  load_time sysdate,
  Champ_2 position (01:10).
  Champ_1 position(11:20)
  )
  Note that positions 11 to 20 are loaded in positions 1 to 10 in Champ_2 and Champ_1. The load_time field is filled with time current (sysdate) load.
  
  Here is the data. The name of the file (load_1.dat) had been specified with the statement for infile in the control file.
  
  load_1.dat
  
  0123456789abcdefghij
  **********##########
  foo bar
  This is a very long line
  and the next one is
  short
  
  declared the Champ_1 as a numeric data type, but the input data file contains the data "Sue"(position 11:20) so the sql loader adds not the record to the database instead the record is written in the bad file. But I want to validate the data of the "(position 11:20) is digital or not." How can I post this in the control file itself? If it is not possible, how can I validate it in the database? give me a sample code to explain this

  Here are two ideas.

  Idea 1: This control file will check to see if the data to be loaded in Champ_1 contains a number (including the negative and decimal).

  load data
  infile 'load_1.dat' "str '\r\n'"
  insert into table sql_loader_1
  (
  load_time sysdate,
  field_2 position( 1:10),
  field_1 position(11:20) "decode(trim(translate(:field_1,'-0123456789.',' ')),null,:field_1,-999)"
  ) 
  

  If Champ_1 is a number or null, it is passed through, as is. If there is no numeric characters (in addition to '-'and'.') a distinct value-999 will be inserted for you allow to load the rest of the columns and easy to see the lines had data that cannot be loaded in Champ_1. This idea has its flaws (a string like "... ("will always drain the .bad file)

  Idea 2: Load the data into a staging table first (or define an external table) where all columns are VARCHAR2. Then use SQL or PL/SQL to validate data in the staging table in your process to move the data into the table with the actual data types.

• Creation of the control file has no

  Hi all
  
  
  
  When I am creating the control file my terminal is suspended on the next step
  
  SQL > @/u02/ORACLE/orcldb/9.2.0/dbs/contrl.sql
  ORACLE instance started.
  
  Total System Global Area 581506668 bytes
  Bytes of size 452204 fixed
  402653184 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10629120 bytes
  54
  
  and in the log file alert receive no error

  Hi, Frank.

  Very nice work Helios (as usual).

  Thank you, I share just what I know thatsall

  Thank you, I learned something new today.

  The same for all users of the forum

  Normally, I clone cold backups so I don't need to manually create the controlfile.

  I see that your solution is contained in the following note;
  "Cloning of Oracle Application 11i with rapid Clone /R12 - database (9i/10 g / 11 g) using on Open Database [ID 760772.1] hot backup.

  You are correct, we mainly use this method for hot backup-Section advance clonning

  But I'm still curious to know if Nicolas is to create a clone of a hot backup or a backup to cold, and why he uses the 'ARCHIVELOG' option on his clone.

  It depends, for me I prefer to choose option NOARCHIVELOG and NORESETLOG

  Please check:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htm

  Respect of
  HELIOS

• Corrupt block is detected in the control file

  Hi all
  
  I have a scenario where I have set up regional advisory councils active / standby and I managed archive redo logs applied to sleep - everything was ok
  
  Versions - Oracle 11g R2, RHEL 5
  
  Scenario 1:
  Perfectly redo application log on the work of sleep when I don't create our software application tables using sql on the primary scripts until AFTER the stages of CAR/Dataguard completed successfully.
  
  
  
  Scenario 2:
  Redo log application does not work when I'm not running our sql scripts until I take a RMAN backup of the primary to be duplicated in the Standby
  
  Everything comes in the day before after the rman duplicate, archive logs is transferred, but now they are not applied.
  
  I see the ORA-00227: Corrupt block is detected in the control file: (block 1, block # 1) in the journal alerts when I put on standby in Recovery Mode
  
  My theory is that somehow our sql scripts are breaking my rman backups when I run them before creating a primary RMAN backup to load on Standby - I just need someone to indicate whether there is a possibility of their experience, if so I will contact the support of Oracle to continue the investigation. It's my first time working on CARS DG etc.
  
  Thank you

  Hello
  If not solved with 11.2.0.2 I opened a SR.
  I don't think that this should be the case...
  Sebastian

• ORA-01103: name of database 'Soqs2' in the control file is not ' tests1...

  Hello, please help me on this... im using 10.2.0.4.0, DB created by ex-colleague
  
  When the db connection has ora error 1103 and tried to create controlfile using track, but I could not
  
  Here are the details:
  
  Tests1 > bootable media.
  ORACLE instance started.
  
  Total System Global Area 734003200 bytes
  Bytes of size 2141536 fixed
  328159904 variable size bytes
  369098752 of database buffers bytes
  Redo buffers 34603008 bytes
  ORA-01103: "Used2" database name in the control file is not "Tests1.
  
  you want save ctl file and changing the dbname, get error below...
  
  Tests1 > alter database backup controlfile to trace;
  ALTER database backup controlfile to trace
  *
  ERROR on line 1:
  ORA-01507: database not mounted
  
  TESTING1:/app/Oracle/TESTING1/product/10.2.0.4/DBS > grep db_name initTESTING1.ora
  * .db_name = "Gel1.
  
  I found used2 entered into the alert log file...
  
  Tests1: / app/oracle/tests1/admin/bdump > grep used2 alert_TESTING1.log
  DBNAME will change to the new DBNAME of used2 tests1
  Name of database used2.
  ID of the database for the database used2 changed in 1933958893.
  
  I tried to create new controlfile and tried to start... got under error so I hv mentioned even path of the data files...
  ORA-01161: name of database used2 in the file header does not match name tests1

  This is the first law of holes.

  When you are in a hole, the first thing you can do is STOP digging.

  Did you take a full backup, the cold since the event started?

  DBNAME will change to the new DBNAME of used2 tests1

  When & why this has happened?

  You have a valid & recent backup?

  I tried to create new controlfile

  Why did you do this?

  Edited by: sb92075 may 7, 2010 20:36

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive.

  It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive. Any help will be much appreciated.

  To avoid this, I'm making sure that files are not left open so much because we run backup incremental three times in a week.

  Files is not very high - about - 2 MB

  Some screenshots are inserted

  Thank you

  Amit

  http://answers.Microsoft.com/en-us/Office/Forum/office_xp-Excel?tab=unanswered&TM=1373425932359

  above is office xp, excel forum you might be better off poster in this forum that many people are familiar with excel and powerpoint.

• Add other fields to sql * source file loader without including them in the control file

  Hello

  We have a file that we receive every day to an external resource. We load the file into Oracle using Sql tables * Loader!

  My question is, if external resources added more fields at the end of the file and I USED to change the control file to load (almost there will be right there without any use!)

  Will I get an error SQL * loader?

  or else, it will be fine!

  Thank you

  /HESI

  In general, SQL * Loader will simply ignore the extra fields at the end of the line.  However, there are exceptions to all rules.  To do a correct delimiter after the last field you load.  The additional fields must dressed not in the next line, unless you have authorized to do this.  If the end of the characters of the line of the source operating system do not match at the end of the characters in the line of the target operating system, then you need to deal with this in one of the various ways.  These are a few examples.

• ORA-00338: 3 log thread 1 is more recent than the control file

  Hello
  
  I met the error ORA-00338 while performing the recovery of incomplete data:
  
  ORA-00283: cool cancelled due to errors
  ORA-00338: 3 log thread 1 is more recent than the control file
  ORA-00312: wire 3 1 online journal: "+ DG_REDO/dbase/onlinelog/group_3.267.814820795".
  Complete recovery manager.
  
  I made this recovery on oracle 10g, database of ASM.
  
  1. What are the possible causes of this error ORA-00338?
  
  2. This error occurs at the beginning of the media recovery, RMAN is applying logs archived. If RMAN does newspapers "Online REDO" after applying "archived" logs required for recovery or in front of them?
  
  3 rman is how this journal in line 3 is more recent than the control file? How can I me SNA of the journal online & file control in my environment?
  
  Here are some details related to checkpoint scn / change # info. I found in my environment:
  Before recovery:
  view
  v$ datafile: 642935
  v$ datafile_header: 642935
  v database $: 642935
  Journal of v$: 640956
  
  After the recovery fails (ORA 338 :()
  v$ datafile: 640917
  v$ datafile_header: 640056
  v$ database: 640906
  Journal of v$: 640906

  You could try the incomplete recovery has to do only the RESTORE DATABASE with RMAN.
  Then, using the SQLPLUS command line, issue a RECOVER database with the HELP of BACKUP CONTROLFILE until CANCEL. See which he records guests for and monitor messages in the alert.log

  Hemant K Collette

• problem in the zip file and tutorial. can someone remove or correct...

  Hi experts jdev,.
  
  use jdev11.1.1.5.0.
  
  When I am new on this webservice. I followed this tutorial
  http://docs.Oracle.com/CD/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
  
  wsdl URL link when using that wsdl.
  
  throws an error.
  What is the reason, said john. OK at the second post of the thread.
  Consume a Web Service from a Web Page
  
  so if I change the wsdl means somethings should be changed in steps tutorial.
  
  If any newbie crossing this tutorials feels very difficult to work. so I can change the wsdl url link and these steps.
  
  and another thing, as I installed 11.1.2.0 and download zip file in this tutorial and I run up the same error.
  
  so. problem in the zip file and tutorial. any person may file or correct...
  
  I think it's the right place to say this. Otherwise, re - direct me.

  It's yours if you want to close. I ping the folks at Oracle.