problem iPhone app preview.

Similar Questions

• iPhone App-Sync with iTunes problem

  Today, I downloaded a new iPhone App in

  iTunes [12.4.3.1]

  on a Macbook Pro [10.11.6]

  who has several granted previously iPhone Apps, all updated and everything already works on my iPhone 5 [9.3.5] (Firmware 10.01.00).

  Recently, via USB, attempts to sync-ing my iPhone work, however, the iPhone settings / window Apps in iTunes is completely gray, including "checked for the installation of new applications" just below the list of applications.

  Download of news today is sitting there in the list with its play button "install", and with everything else, is not interactive. "

  After reading a full restore of the iPhone has worked for others, I restored the iPhone with iTunes by selecting the option traded using my "iPhone name.

  Now, all applications are absent from the iPhone and is not able to be loaded as they all remain still grayed out in iTunes under the iPhone settings / (summary, Apps, music / etc).

  However, as it was previously, I'm still able to select manually in the music , the books and pictures, etc., and have such precisely Sync-ed with the iPhone currently.

  How an update iTunes and OSX are incompatible for Sync-ing updated iPhone apps to iPhone updated via USB?

  Help, please.  Thank you.

  The first thing that comes to mind is a problem to Apple ID.

  Did you use the same Apple ID to purchase each of your applications, books and music?

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Apple TV will not be displayed as home hub in iOS iPhone app House 10

  I'm trying to set up the AppleTV 4th gen to act as a drop-in centre, but it will not be displayed in the home of the iPhone app.

  Both devices use the same iCloud, tried a disconnection and returned but nothing, two-factor authentication is activate, location is enabled, iOS are both updated with even wifi link...

  Also, I checked in my apple ID page and all devices appear correctly, but I can't understand why the Apple TV is not recognized by iPhone kit home.

  Any help appreciated

  Dave

  I have the same problem.  A ran the same traps you.  2 factor auth active.  Sign in and out icloud.  No luck.  Can activate ipad like home but 4th gen apple tv hub will not simply act as the hub.  Under settings, accounts, icloud... no homekit option available.

• badge iPhone app notification will not clear

  badge iPhone app notification will not clear. The version of the software 6 using iphone 9.3.5. The phone application will not erase the last badge referring to a message I've ever listened to and deleted. The problem started after updating iOS version 9.3.4 and continues with 9.3.5. Research on possible solutions, apparently this has been a recurring problem with the iPhone over the past years.  Possible solutions included notification of closure when it pops up, restart the iphone, update to the latest version of iOS, activating / disabling the group by App.  I had to disable notifications from app badge hoping that Apple will provide a solution. In the meantime his is going to be a pain not having not not available visual notification.

  Tap Settings > general > reset > reset all settings

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• iPhone App cannot connect

  Hello

  I have activated ReadyCloud for the first time yesterday on my NAS204 (OS 6.5.0) and downloaded the new App (V1.57). After starting the application, my SIN is found and marked online. After tapping on it, I see my files and "Connecting" message... "on the top, which never ends. No matter if I'm on cellular or wifi even as the SIN, it can not connect. The desktop application on my PC works, but the PC is in the same local network as the SIN. I have not sent any port in my router or changed anything in the operating system NAS, already active ReadyCLOUD.

  Hi there, everything works fine now with OS ReadyNAS 6.6.0 and iPhone App 1.5.9. The update of the OS ReadyNAS has solved the problem for me.

• Find iPhone App no longer works

  I recently had to change the battery in my iPhone 5. Tried to use Find iPhone app on my iPad today and nothing happens, message bed "phone in offline mode."  App

  locates the iPad, so the problem must be connected to a battery in the iPhone. Any suggestions on how to fix this?

  Changing the battery?

• Adding HP ePrint home and Biz iPhone app - mal printer cannot find the email address of the printer

  I'm trying to connect my HP Photosmart c6380 to my iPhone. I have already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.

  When I go to 'Manage ePrinters' and try to add a printer with the + button I see 3 choices:

  Add x to list: "no available ePrinters.

  Manually add: I can't find the printer even email address using the instructions available on the ePrint centre.

  Add the WiFi network: my printer is not shown in this list, so it does not support Autodiscover.

  So I guess that if I could just find email address of my printer that would connect to my iPhone for wireless printing, but I can't for the life of me find.

  Any help is greatly appreciated.

  Thank you.

  Hello amybett,

  I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint capable home and Biz iPhone app, it didn't need to be Airprint/Eprint, as it is connected to the same network as your phone.

  Here are the steps that you want to print something:

  1. installation of the application by filling in the electronic registration and entering the code (which I believe you have).

  2. Select the item you want to print by using the menu in the application (Photo Albums, files saved, Web browser, etc.).

  3. Once you select the item, you should see article and a big button "Print" under him.

  4. If the printer you want to print to is not listed above the 'Print' button, select the icon on the right (key/computer), and then select the printer you want to use (and other parameters).

  5. press the button 'Back' at the top left, then tap "Done" (blue top-right button) and then press the 'Print' button to print your article.

  Let me know if you still have problems after following the guide above.

• MG5600 iphone app Canon printer ask qr code could not be found

  Downloaded iphone app from Canon to print & scan. He asked to scan QR code or the Code of connection.

  I can not find anything to print from the cloud on my printer settings.

  I need to have this work soon as I will work on the road and take my printer and I don't have time to mess around with the clients network problems ect.

  Where is this?

  Hi joanwilkins,

  Canon printing and scanning software is not compatible with the PIXMA MG5600 printer.  Instead, we recommend that you use the app to PRINT Canon inkjet ink/SELPHY, available for download on the Apple app store.  Once the application is downloaded, please follow the steps located here to print using the app and here to scan using the application.

  If you need more assistance, please call 1-866-261-9362, Monday - Friday 10:00 - 10 pm et (excluding holidays) and a technical support representative Cannon will be happy to help you.  There is no charge for this call.

• App displays only not on the iphone App Store

  Hi all

  We just came out or iOS app on the wound of the State 'pending Release Developer' App about 6 hours ago.

  Version 2 of an application that was available on the iPad, but this new version is based fo the iPad and iPhone.

  The App Store on iPad has made the new version for about 2 hours, but the iPhone App Store evidence yet the app.

  Its possible that delays are different for different devices stores? But we were wondering if anyone has experience with DPS applications released for iPhone and iPad?

  We looked for the application on the Bank of South Africa and the USA store but its nowhere to be found. (its configured so as to be available on the stores of all countries) The link from the browser below is our app - it says that the app is "designed for iPhone and iPad" and 'Compatible with iPhone, iPad and iPod touch' - so we think that our application itself isn't the problem.

  https://iTunes.Apple.com/us/app/Edgars-Club-Magazine/id915716936

  Any ideas where we turned bad? or we should just be patient?

  Thanks, Vauneen

  Give it time, it takes time for ads to update Apple store.

  Neil

• remove the Middle-click to open iphone app

  I'm using adobe captivate 8, I do some iphone app, the problem that I need to remove the first click (to see app)

  which app to open

  If I remember correctly, it's Apple that prevents automatic execution...

• Support for Adobe VideoBite IPhone App?

  Hello

  I'm trying to get support for the Adobe VideoBite iphone app. I use a recent version of Adobe VideoBite 1.5.0 on an iPhone with iOS 5 7. Everything works fine until I try to record video on my camera. I usually get a bar nice treatment that fills finally until the end, but crashes then it to the end indefinitely. I tried to reinstall the software, turn on/off my phone, confirming that the app had access to my camera and try other smaller compilations of three clips of 5 sec. Still nothing.

  Someone at - it advice for the escalation of problems of this kind? Its not to break my phone and it is a free app, so I don't know that it's one thing to low priority. I chatted with the direct support of Adobe and they made me here or iTunes.

  What's a case where they (Adobe/iTunes) must update the app for iOS7?

  Thank you

  Sean

  Sean-

  Yes, it is a bug that has been fixed and you will see in the next version of VideoBite to release.

  Thank you

  Guinot

• Overview of article does not not in the iPhone App

  I have free items available for previewing before hitting a paywall and must pay for the app. It works very well in my universal app on ipad, but on the iphone, the Preview button does not appear. Help, please

  At that time, overview Article free is iPad only. It does work on the iPhone.

• LR4.0 will not read the traces for iPhone App "Traces GPS"

  Hello

  I tried to understand, looking at this forum and another search on Google, why LR4 import tracklogs from the iPhone App GPS tracks.

  As far as I can tell, the tracklog information and format corect seems to me. Here is a sample of the app:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < gpx version = "1.0".

  Creator = "traces GPS - " http://highorderbit.com "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xmlns =" http://www.topografix.com/GPX/1/0 "

  " xsi: schemaLocation =" http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd' > .

  < time > 2012-03-18T 23: 20:59Z < / time >

  < trk >

  < name > Track Log 2 < / name >

  < number > 1 < / number >

  < trkseg >

  < trkpt lat = '+ 48.473296' lon = "-68.429246" >

  < model > + 65.511414 < / ele >

  < time > 2012-03-18T 23: 20:13Z < / time >

  < / trkpt >

  < trkpt lat = '+ 48.473379' lon = "-68.429238" >

  < model > + 63.738411 < / ele >

  < time > 2012-03-18T 23: 20:15Z < / time >

  < / trkpt >

  < / trkseg >

  < / trk >

  < / gpx >

  Any idea?

  Thank you

  Steve,

  The problem with the tracklog is the '+' in the specifications of the latitude. Remove the brands '+' the legible tracklog. Now, I'm not sure if a '+' is valid or not (http://developer.garmin.com/schemas/gpx/1.0/oxygen/index.html_h882410155.html), but for this time Jeffrey Geoencoding Plugin will not read the tracklog...

  Beat