Problem module (C3KX-NM-10GT) 10GB - T on the stack of 3750

Similar Questions

• what maximum of support of fiber cable module C3KX-NM - 1 G

  3560 x that uses with module C3KX-NM - 1 G, the question is: what is the maximum length of the fiber cable supported? Thank you

  This isn't an easy question to answer.

  First of all, he should know what kind of FPS uses the client: SH, LH, ZX, ER, etc..

  Then, you must take into account the thickness of the cable: OM1, OM2, OM3 OM4.

  Go HERE and look at Table 1.

  Be sure to note our useful messages.

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Is apparently is a problem of Google Chrome browser.  There is no problem in Firefox.  BC said they are working on a solution.

• Problem module titration

  Hi all

  I have problems with the display of the module of titration in Premiere CS4. The Main Title Panel, where you actually create the title, will not appear. All the menus around it - properties of title, title tools, Heading Styles - are there, but there is no work space to create the title. I was just using the titration module this afternoon without problem. I don't know what happened. I have attached a screenshot. Any help would be appreciated.

  -Dustin

  

  Welcome to the forum.

  First thing I would do would be to go to the window > workspace > reset Workspace and Titler can open.

  Good luck

  Hunt

• Design application problem module

  Hi all
  I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0
  
  In my application I am below model following
  
  1 Root app and 3 module application nested under the root to use connections less DB
  
  RootAppModule
  NestedAppModule1
  NestedAppModule2
  NestedAppModule2
  
  2 - I have a few common data from REF discover objects used by all 3 nested zeros, so I add only in RootAppModule
  
  If I go with above model I can't access Ref data display objects in NestedAppModules
  
  If I extend RootAppModule in NestedAppModules then I can access objects from view but I get error in the request below module Tester
  
  Houston-25226: Application module System definition model. NestedAppModule1 contains the recursive reference AM
  
  seems to nest and extension works only at the same time
  
  My Questions:
  
  1. won't my habits?
  2 - What is best model to implement my use case?
  3. should I have add Ref under all NestedOnes data display objects (looks bad for me)
  
  Appreciate your comments
  
  Mohsen

  Mohsen,
  To access the root am necessary h call you getRootApplicationModule() nested ApplicationModuleImpl gives you the year root which your cat to your root class am class impl. Now you can call each root method you like...

  Your questions
  (1) No, the boss's ok
  (2) you have described here
  (3) No, you access the root am am am required to access the root method.

  Timo

• Problem moving from one page to another on the Web site

  When I access this site with Firefox
  I can't go beyond the first page. The problem is the same on our second computer. If we use Google Chrome or Internet Explorer, everything works fine. I tried the unblocking of the popups in the option settings, and it makes no difference. I can't directly compare the internet in other browsers proxy servers re access settings because basically, I do not understand the information on the screens! Help!

  If you use ad blocking extensions, could you try to make an exception for the site?

  If that doesn't help and you want someone to look at your list of modules, you can copy and paste into the second table here ("Extensions"):

  Help > troubleshooting information

  Alternatively, you can try these sites with your add-ons disabled using Firefox Safe Mode. Use

  Help > restart with disabled modules

  In the dialog box, not the check boxes, click on "continue mode without failure." If the sites work as expected, then the most likely cause is one of your modules.

  Is it that help at all?

• error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

  I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

  I am running XP with MS and updates.

  Would appreciate some advice.

  Chris

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

  Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after the windows xp registry.

  RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.

  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer

  Original thread: runn dll
  I get on this on my vista desktop
  Error loading \3\lxcgtime.dll
  the specified module could not trading

  and this on my computer vista laptop
  Windows Defender
  faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer. \

  and I would like to know how to play mkv video media Center (win 7 not vista)

  Hello

   
   
  Did you do changes on the computer before the show?
  
  Method 1:
  You can perform these steps manually to start the Windows defender and check:
  a. Click Start.
  b. in "Start Search", type services.msc and then right-clicking the name of "services" in the list of programs.
  c. Select "Run as Administrator".
  d. look for windows defender and right click and select start.
  
  Method 2:
  You can also view provided articles knowledge base and check:
  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849
  Error message when you run a beta version of Windows Defender: "failed to initialize: 0x800106ba»
  http://support.Microsoft.com/kb/930522
   

• Relink the module 'FEMCCE' failed when trying to install the Patch 17040891

  Reissue of links module "FEMCCE" product fem...

  do /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/out/link_fem_31349.mk f

  From the MEF executable link 'FEMCCE' Thu Oct 24 16:44:07 CDT 2013
  g ++-m32 '--L/u02/oracle/DEVE/apps/tech_st/10.1.2/lib-L/u02/oracle/DEVE/apps/tech_st/10.1.2/lib/stubs - lclntsh o /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE of the L/u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs.
  /U02/Oracle/deve/apps/apps_st/appl/FEM/12.0.0/lib/ccemain.o.------
  /U02/Oracle/deve/apps/apps_st/appl/FEM/12.0.0/lib/libfem.a /u02/oracle/DEVE/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a /u02/oracle/DEVE/apps/apps_st/appl/eng/12.0.0/lib/libeng.a-lsql10 - lclntsh "cat»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags ' cat»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags - lmm-lcore10-lxml10-lunls10 - lsnls10 - lnls10-lcore10-lnls10 ' cat 'cat /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags ' '--»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10-lcore10-lxml10-lunls10-lsnls10-lnls10-lcore10-lnls10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10-lcore10-lxml10-lunls10-lsnls10-lnls10-lcore10-lnls10 « cat /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/sysliblist » -ldl -lm - lpthread /u02/oracle/DEVE/apps/apps_ St/Appl/SHT/12.0.0/lib/rwtools/libtls0s.a /u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so /u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
  '. (gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' référencé dans la section «.rodata» dele de /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o): defined in article scrapped. GNU.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' of u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o)
  '. (gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' référencé dans la section «.rodata» dele de /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o): defined in article scrapped. GNU.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' of u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o)
  collect2: ld returned 1 exit status
  make: * [/ u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE] error 1
  Done with the link of the MEF executable 'FEMCCE' Thu Oct 24 16:44:07 CDT 2013

  Relink the module 'FEMCCE' failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure.  In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.

  Done with the link of the product "MEF" Thu Oct 24 16:44:07 CDT 2013

  
  adrelink dating status 1

  End of session adrelink
  Date/time is Thu Oct 24 16:44:07 CDT 2013
  **********************************************************

  Back to the log file for readability line...
  Fact the line log file.

  Original copy is /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/log/adrelink.lsv
  New copy is /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/log/adrelink.log

  Read these notes.

  R12: MSC Modules error when reissue of links with Adrelink (Doc ID 1345788.1)

  MSC reissue of links error on Linux OEL5/RHEL5, failed to repeat the link of the module 'MSCCPP', 'FEMCCE', 'MSCNEW', 'MSCMON. There is problem of repeat no. MSC on RHEL 4 (Doc ID 1128486.1)

  R12: Cannot be reprinted executable MSC on OEL5/RHEL5 (Doc ID 781553.1)

  Link again of the 'Femcce' Module could not leave 12.1.2 the SLES 10 or OEL/RHEL 5.4 (Doc ID 1102988.1)

  Thank you

  Hussein

• no error message "no Modules compatible video Play.»  Upgrade to the latest display drivers"

  I have a dell studio XPS 435 MT with a Radeon HD 4670 and I'm not the first to initialize.  I had the software for a year or two but has just been implemented.  I get the error message "no Modules compatible video Play.»  Upgrade to the latest display drivers' I made sure I have the latest drivers but there is still no start.  Help, please!  Thanks, Jeffrey

  Please, start here: error 'Premiere Pro could not find capable video game modules | Start

  If this does not resolve the problem, then please report the exact version of the creation and the types of content you are editing.

• Library module has disappeared - how do I download the new copy of 4.4 V?

  I'm under V 4.4. My library Module has disappeared. I would like to download a new version. Others are experiencing this problem?

  Thank you

  Susan
  

  I doubt you need to reinstall, Susan - you can probably re-enable the module library simply by right-clicking on the module bar and select the modules you want on the shortcut menu.

• As a beginner, it's very basic, I imported my address book apparently ok, but I'm having a problem trying to address an e-mail to the address book in

  As a newbie it is very basic, I imported my address book apparently ok, but I'm having a problem trying to address an e-mail to the address book in the address field, I'm a right click, left click, but no list of addresses appearing or contact component which I should be able to see all the entries in my address book. What am I doing wrong please?

  Open a window of writing and press F9 to activate the touch pane.