Problem module titration

Hi all

I have problems with the display of the module of titration in Premiere CS4. The Main Title Panel, where you actually create the title, will not appear. All the menus around it - properties of title, title tools, Heading Styles - are there, but there is no work space to create the title. I was just using the titration module this afternoon without problem. I don't know what happened. I have attached a screenshot. Any help would be appreciated.

-Dustin

Welcome to the forum.

First thing I would do would be to go to the window > workspace > reset Workspace and Titler can open.

Good luck

Hunt

Tags: Premiere

Similar Questions

Problem module (C3KX-NM-10GT) 10GB - T on the stack of 3750

I bought a two port 10 GB-T network port module (C3KX-NM-10GT) for my stack of switch 3750-X (4 in the stack). After having powered the entire stack, connect the module, re - all powered. When I run a 'sh ip int bri"I see not two, but eight 10 GB ports. Two for each switch of the battery. Not only that, but when I try to plug something in the module it still shows the State (notconnect).

I tried checking the IOS version to recommend, but the only documentation that I could find was on the module (C3KX-NM - 10G), ( http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modu... ). This shows a version of the IOS 12.2 (53) SE. I have 12.2 (58) TO so this should be good?

Is this a problem with the incompatibility of IOS or some other problem with the stack of the switch? Nobody knows the version of IOS recommended for this module?

Go HERE.

Shows documentation you need, a minimum of 15.0 (1) SE. Personally, I would recommend you stay away from this version and go directly to 15.0 (2) SE4.

Be aware of an IOS 12.2 (58) upgrade SE to everything the 15.X will also include an upgrade mandatory bootstrap (aka firmware). All-in-all, it takes about 25 minutes to upgrade. So don't be scared or ground-your-pants. Make sure that you have for a timeout of 45 minutes.

Before and after the problem - Module Development - Windows 7, 64-bit - Lightroom CC v. 2015.5 - camera raw 9.5

I use Windows 7 64-bit, Lightroom CC 2015.5 Camera Raw 9.5 and the module development on a feature photo ' before and after ' does not work.
He shows me the image changed, but not the original (I don't know exactly what another image "edited", it shows me).
In the screen shot, you can see the pictures "before and after" and the one original overxposed.
I hope I am clear enough.
Any suggestion?
Thank you :-)

Click with the RIGHT button ON the import step in HISTORY (do click NOT just what this will change your photo AFTER) and select "copy history step settings to before.

"

Kubuntu 14.04 build vm-net problem module

I get an error when trying to install VMWare Workstation 9 on Kubuntu 14.04.
---------
Error:

Login to /tmp/vmware-root/vmware-modconfig-4891.log

Stopping VMware services:

Demon of authentication makes VMware

VM communication interface socket family is

Virtual machine communication interface is

Virtual machine monitor makes

File system is blocking

Using 2.6.x kernel build system.

do: map binnengegaan wordt ' / tmp/modconfig-ElUUni/vmnet-only.

/ usr/bin/make /lib/modules/3.13.0-24-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

MODULEBUILDDIR = modules

make [1]: map ' / usr/src/linux-headers-3.13.0-24-generic' binnengegaan wordt

CC [M] /tmp/modconfig-ElUUni/vmnet-only/driver.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/hub.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/userif.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/netif.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/bridge.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/filter.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/procfs.o

CC [M] /tmp/modconfig-ElUUni/vmnet-only/smac_compat.o

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/filter.c:48:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/filter.c:48:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

/tmp/modconfig-ElUUni/vmnet-only/filter.c: at the highest level:

/tmp/modconfig-ElUUni/vmnet-only/filter.c:206:1: error: conflicting types for 'VNetFilterHookFn '.

VNetFilterHookFn (unsigned int hooknum, / / IN):

^

/tmp/modconfig-ElUUni/vmnet-only/filter.c:64:18: Note: previous declaration of 'VNetFilterHookFn' is here

public static nf_hookfn VNetFilterHookFn;

^

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/hub.c:43:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/hub.c:43:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/smac_compat.c:53:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/netif.c:42:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/driver.c:51:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/filter.c:64:18: warning: 'VNetFilterHookFn' used but never defined [default]

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/filter.c:206:1: warning: 'VNetFilterHookFn' defined but not used [- Wunused - function]

VNetFilterHookFn (unsigned int hooknum, / / IN):

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/netif.c:42:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/procfs.c:43:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/hub.c: in function 'VNetHubFindHubByID ':

/tmp/modconfig-ElUUni/vmnet-only/hub.c:132:49: warning: 'sizeof' into 'memcmp' appeal argument is the expression even as the first source. Did you provide an explicit length? [- Wsizeof - pointer-memaccess]

memcmp (idNum, currHub-> id.pvnID, sizeof idNum))) {}

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/driver.c:51:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

/tmp/modconfig-ElUUni/vmnet-only/hub.c: in function 'VNetHubAlloc ':

/tmp/modconfig-ElUUni/vmnet-only/hub.c:315:36: warning: the argument of 'sizeof' into 'memcpy' appeal is the same type of pointer ' uint8 *' as the destination. EXPECTED "uint8" or explicit length [- Wsizeof - pointer-memaccess]

memcpy (hub-> id.pvnID, id, id sizeof);

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/smac_compat.c:53:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/procfs.c:43:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

make [2]: * [/ tmp/modconfig-ElUUni/vmnet-only/filter.o] Fout 1

make [2]: * Wachten op onvoltooide taken...

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/userif.c:45:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/userif.c:45:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

/tmp/modconfig-ElUUni/vmnet-only/userif.c: in function 'VNetUserIfIoctl ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/userif.c:809:7: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE(VNET_NOTIFY_VERSION == 5);

^

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/userif.c:810:7: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE(ACTION_EXPORTED_VERSION == 2);

^

In file included from tmp/modconfig-ElUUni/vmnet-only/vnet.h:28:0,

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/bridge.c:52:

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompilePtr ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2558:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Ptr, 64, void const *, void *, uintptr_t)

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h: in function 'AtomicAssertOnCompileInt ':

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2397:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused];             \

^

/tmp/modconfig-ElUUni/vmnet-only/vm_atomic.h:2562:1: Note: the expansion of the macro 'MAKE_ATOMIC_TYPE '.

MAKE_ATOMIC_TYPE (Int, 32, int, int, int)

^

In file included from tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:31:0,

of tmp/modconfig-ElUUni/vmnet-only/vnet.h:29.

of tmp/modconfig-ElUUni/vmnet-only/vnetInt.h:24.

from /tmp/modconfig-ElUUni/vmnet-only/bridge.c:52:

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h: in function 'MonitorActionSet_AtomicInclude ':

/tmp/modconfig-ElUUni/vmnet-only/vm_assert.h:320:20: WARNING: typedef "AssertOnCompileFailed" locally defined but not used [- Wunused - local-typedefs]

typedef char AssertOnCompileFailed [AssertOnCompileMisused]; \

^

/tmp/modconfig-ElUUni/vmnet-only/monitorAction_exported.h:91:4: Note: the expansion of the macro 'ASSERT_ON_COMPILE '.

ASSERT_ON_COMPILE ((ACTION_WORD_SIZE & (ACTION_WORD_SIZE-1)) == 0);

^

make [1]: * [_module_/tmp/modconfig-ElUUni/vmnet-only] Fout 2

make [1]: map ' / usr/src/linux-headers-3.13.0-24-generic' is good

make: * [vmnet.ko] Fout 2

do: map when wordt ' / tmp/modconfig-ElUUni/vmnet-only.

Vmnet failed. Cannot run the command build.

Starting VMware services:

Virtual machine monitor makes

Virtual machine communication interface is

VM communication interface socket family is

File system is blocking

Virtual Ethernet failed

Demon of authentication makes VMware

Journal:

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = 4891 version 9.0.3 = build = build-1410761 option = output

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: The process is 64-bit.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Host is Linux 3.13.0 - 24-generic Ubuntu LTS 14.04

2014 04-29 T 10: 46:57.415 + 01:00 | vthread-3 | I120: Msg_Reset:

2014 04-29 T 10: 46:57.415 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ": Bestand of map bestaat niet.

2014 04-29 T 10: 46:57.415 + 01:00 | vthread-3 | I120: ----------------------------------------

2014 04-29 T 10: 46:57.415 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Msg_Reset:

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / home/jelle/.vmware/config ': Bestand of map bestaat niet.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: ----------------------------------------

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in home/jelle/.vmware/config file. Using the default values.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: Msg_Reset:

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / home/jelle/.vmware/preferences ': Bestand of map bestaat niet.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: ----------------------------------------

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | I120: PREF cannot load the user's preferences.

2014 04-29 T 10: 46:57.416 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-root/vmware-modconfig-4891.log

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: Setting way of 3.13.0 letterhead - 24-generic to ' / lib/modules/3.13.0-24-generic/build/include '.

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.422 + 01:00 | vthread-3 | I120: Created new pathsHash.

2014 04-29 T 10: 46:57.428 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.428 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Reading in info for vmci module.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.

2014 04-29 T 10: 46:57.566 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.

2014 04-29 T 10: 46:57.568 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

2014 04-29 T 10: 46:57.568 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

2014 04-29 T 10: 46:57.569 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

2014 04-29 T 10: 46:57.569 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.

2014 04-29 T 10: 46:57.571 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

2014 04-29 T 10: 46:57.571 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.

2014 04-29 T 10: 46:57.572 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

2014 04-29 T 10: 46:57.572 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.

2014 04-29 T 10: 46:57.574 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

2014 04-29 T 10: 46:57.586 + 01:00 | vthread-3 | I120: must be installed: vmnet status: 0

2014 04-29 T 10: 46:57.599 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

2014 04-29 T 10: 46:57.599 + 01:00 | vthread-3 | I120: Setting way of 3.13.0 letterhead - 24-generic to ' / lib/modules/3.13.0-24-generic/build/include '.

2014 04-29 T 10: 46:57.599 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.599 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.599 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.605 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.605 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.743 + 01:00 | vthread-3 | I120: Kernel header path comes from FileEntry: /lib/modules/3.13.0-24-generic/build/include

2014 04-29 T 10: 46:57.743 + 01:00 | vthread-3 | I120: update the kernel header path to the /lib/modules/3.13.0-24-generic/build/include

2014 04-29 T 10: 46:57.743 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.743 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.743 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.749 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.749 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.750 + 01:00 | vthread-3 | I120: Compiler found in ' / usr/bin/gcc ".

2014 04-29 T 10: 46:57.752 + 01:00 | vthread-3 | I120: Got gcc version "4.8".

2014 04-29 T 10: 46:57.752 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

2014 04-29 T 10: 46:57.752 + 01:00 | vthread-3 | I120: With the help of the compiler provided by the user "/ usr/bin/gcc".

2014 04-29 T 10: 46:57.754 + 01:00 | vthread-3 | I120: Got gcc version "4.8".

2014 04-29 T 10: 46:57.755 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

2014 04-29 T 10: 46:57.758 + 01:00 | vthread-3 | I120: Try to find a PBM adapted to the core ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.758 + 01:00 | vthread-3 | I120: No corresponding PBM set has been found for the core ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.758 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.758 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.758 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.763 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.764 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.764 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

2014 04-29 T 10: 46:57.764 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.764 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.764 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.770 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.770 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.770 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

2014 04-29 T 10: 46:57.770 + 01:00 | vthread-3 | I120: Temp dir using ' / tmp '.

2014 04-29 T 10: 46:57.771 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

2014 04-29 T 10: 46:57.771 + 01:00 | vthread-3 | I120: Setting way of 3.13.0 letterhead - 24-generic to ' / lib/modules/3.13.0-24-generic/build/include '.

2014 04-29 T 10: 46:57.771 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.0-24-generic/build/include ' for kernel version ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.771 + 01:00 | vthread-3 | I120: Could not find /lib/modules/3.13.0-24-generic/build/include/linux/version.h

2014 04-29 T 10: 46:57.771 + 01:00 | vthread-3 | I120: /lib/modules/3.13.0-24-generic/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.

2014 04-29 T 10: 46:57.777 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value ' 3.13.0 - 24-generic.

2014 04-29 T 10: 46:57.777 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.0-24-generic/build/include ' to the core ' 3.13.0 - 24-generic ' is valid. Boo!

2014 04-29 T 10: 46:57.916 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

2014 04-29 T 10: 46:57.917 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

2014 04-29 T 10: 46:58.152 + 01:00 | vthread-3 | I120: The setting for vmnet destination path to ' / lib/modules/3.13.0-24-generic/misc/vmnet.ko '.

2014 04-29 T 10: 46:58.153 + 01:00 | vthread-3 | I120: Extraction of the source vmnet "/ usr/lib/vmware/modules/source/vmnet.tar".

2014 04-29 T 10: 46:58.158 + 01:00 | vthread-3 | I120: Extract successfully the vmnet source.

2014 04-29 T 10: 46:58.158 + 01:00 | vthread-3 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-ElUUni/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.13.0-24-generic/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".

2014 04-29 T 10: 46:59.568 + 01:00 | vthread-3 | W110: Vmnet failed. Cannot run the command build.

External references found:
Xubuntu-users - breaks [xubuntu-users] 14.04 VMware - msg #00154 - recent Discussion OSDir.com
Please someone be so kind to help me out here. My gratitude is going to be great to the point of almost infinite.

Sorry, did not know what terminology search initially, but this was already answered here:

http://dandar3.blogspot.cz/2014/01/VMware-Player-601-on-Ubuntu-1404-alpha.html

This patch works!

Design application problem module
Hi all
I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0

In my application I am below model following

1 Root app and 3 module application nested under the root to use connections less DB

RootAppModule
NestedAppModule1
NestedAppModule2
NestedAppModule2

2 - I have a few common data from REF discover objects used by all 3 nested zeros, so I add only in RootAppModule

If I go with above model I can't access Ref data display objects in NestedAppModules

If I extend RootAppModule in NestedAppModules then I can access objects from view but I get error in the request below module Tester

Houston-25226: Application module System definition model. NestedAppModule1 contains the recursive reference AM

seems to nest and extension works only at the same time

My Questions:

1. won't my habits?
2 - What is best model to implement my use case?
3. should I have add Ref under all NestedOnes data display objects (looks bad for me)

Appreciate your comments

Mohsen
Mohsen,
To access the root am necessary h call you getRootApplicationModule() nested ApplicationModuleImpl gives you the year root which your cat to your root class am class impl. Now you can call each root method you like...

Your questions
(1) No, the boss's ok
(2) you have described here
(3) No, you access the root am am am required to access the root method.

Timo

After effects CC output Modules to render only Machines

Hi there, I have a problem with the custom output Module Templates and my cluster:
After Effects CC 12.0.0.404 (also showing up-to-date cloud Creative)
Mac OS X 10.8.4 (Mountain Lion last version)
Mac Pro 2.93 GHz, Radeon 5870 8-Core, 32 GB RAM and with Blackmagic Decklink Extreme 3D +.
Remote Machines (there are four) are Mac Pros (Quad-core, running 10.7.2 with 16 GB of RAM), by using the ae_render_only_node.txt file in their folder of user Documents.
The exact error:
aerender ERROR: no output to the name module model were found.
I try to get a cluster working with After Effects CC (see exact version above). Unfortunately, I need custom output modules, and I can't seem to get the slaves made to recognize. I found older sons on this particular issue, but no solution has been found.
I use commandline aerender in OS X terminal to start a render with a basic test scene.
To simplify things, I tried to test this on a single machine, rendering both slave... Same result everywhere.
Here is what I tried:
I have exported a file of .aom of my main machine (where I have my desired custom output Modules) and attempted to bring on the slaves of rendering. However, because the slaves of rendering are return only, (they ae_render_only_node.txt in their Documents folder), the ability to import Modules output is disabled in After Effects (it opens as the rendering engine of the effects after and modify > Templates menu is grayed out).
Then, I thought I would try to copy the main machine (user) /Users/ / Library/Preferences/Adobe/After Effects/12.0 folder to render slaves, thinking that would get any other file in preference to them to define the output modules. No luck. Launched After Effects (which loads as renderer after effects) and reset my preferences to disk cache (so they were not always of the main machine). Tried again aerender... no luck. Same error:
aerender ERROR: no output to the name module model were found.
After that, I thought it would be a good idea to log out of Adobe Creative cloud on the main machine and try connecting the machine slave made with my UserID and password and temporarily remove the ae_render_only_node.txt file. Then I would import the .aom file in the full version of the AE... I tried this and success! The work of renders... they find the output without problem Modules. Only it is, as soon as I log out and switch between using the ae_render_only_node.txt file, the output Modules are not found. Don't know what's going on--if the output Modules are currently disabled by the ae_render_only_node.txt file? Or maybe signature out of my Adobe ID is to remove preferences that determine the output Modules? Don't know where the output Module preferences are stored to be able to tell.
Next attempt: I thought that I would try my preferences with creative cloud sync. I made sure to check synchronization preferences after effects to ensure that the output Modules are configured to synchronize. I did a sync where I transferred my preferences of the main machine. Then, on the slaves of rendering, I ran synchronization preferences and chose to download preferences. Works when connected, but not when it is used as a single render node. When it comes to a single node returned, he even invites me to download synchronization preferences and exit the Application, which I do, but nothing seems to happen. I retry aerender and still the same error:
aerender ERROR: no output to the name module model were found.
I can't seem to find any info on where the output Modules are actually stored (apparently they are not anywhere in the user/Library/Preferences/Adobe/After Effects / folder?). Visited only nodes not allowed to have custom output Modules? Not even for something as simple as the multi-machine with an action sequence post-render set enabled Proxy?
Any help is greatly appreciated!
Thank you.

Today, we released update after effects CC (12.1), which fixes this bug.

Let us know how things work out for you in the updated version.

How to change the text in a title?

Hello world!
I just met the strangest problem and there is no information on this subject. I want to have a separate set of titles in my video... but can't. If I change one - the other changes too.
To give you more details-, I make a video that will contain a counter in the corner so initially, I want a '0', then when something happens, it will change to a '1' and so on. So I add a new title/text with a '0' in it, then I copy/paste as a separate title, change to "1" and the previous title changes to "1". If I change it to '0', the second title changes to "0" and so on. I am unable to have two independent titles, although it shows clearly separated two 'blocks' and I renamed them same differently so it seems that they should be separate titles, but they are somehow connected for some reason any.
So my question is - how do I separate them in a way that will allow me to see the text for a few seconds and then another text without changes on a text that affect each other?
I use first 11 on Windows 8.1 elements.

varhyid

Get rid of the itinerary of copy/paste.

It is a known situation. You try to work with titles with the same name and change a single title and change other securities derivatives at the same time.

The answer was - workspace Expert...

1. create the title in the Titler. Close the module titration. The title will be automatically placed on the timeline to the position of the marker on the timeline.

2. open the active project, right click on the thumbnail for the title you just created. Select and click on duplicate.

3. slide the double on the timeline. Double-click the title here to open the titration module and create your second title.

4 and so on.

If please review and then let us know if this worked for you. If this isn't the case, please give more details.

Thank you.

RTA

EPA 11 - titles of export

EPA 11 - I'm having a problem exporting a scalable credit. I know that in former versions exported differently from the video titles. I use publish and share/computer/AVI. The exported clip is narrowed. It is not an exact copy of the original. The output is 720 by 480, I see no way to change this. Preset: DV NTSC Standard. How can I get an exact copy? Running on a PC.
Thank you. Peace and long live! Phil

Phil

It's not something you have to except that it is not what you should be found. I have road tested over and over again with my first items 11 Windows 7 64 bit.

Let us go step by step, in the following ways

Open the first Elements 11

Go to file Menu/New/Project and set the project preset it to NTSC DV Standard.

Before leaving the new project dialog box, make sure that you have a checkmark next to the "Force selected setting on this project."

Back in the first Expert elements workspace, go to the Menu text by default/roll.

Type your text. Note the font and the size of the police. The text fit into the inner rectangle of the margin of safety.

Do not apply a Style in the Style section to this test.

Close the titration module by clicking on the two tiny arrows in the upper-right corner of the Palette of setting the module titration.

Publish + share

Computer

AVI

with Presets = DV NTSC Standard

Click Save.

When you see him save complete!, click done.

Then in the same project, go in add media/files and folders and import this standard DV AVI in the active project/project where you drag the DV AVI to space Expert timeline next to the original title of working capital.

They should appear the same.

Previously, the original title of rolling, fonts Adobe Rounded MT Bold, font size 29

After, NTSC DV AVI Standard rolling title

Please check this and then let us know if it might be a step that is missing between us.

Thank you.

RTA

First Pro CS5.5 titreur crashing on start up

I have a recent issue with the titration module. First Pro CS5.5 Titler crashes constantly when opened. I can not open past projects which includes the titration module or have titles in it. Last night I was finishing a project (of course) who has titles in it. This morning when I tried to open the project, I got the BLUE SCREEN of death. I restarted and was able to open the first pro cs5.5, but it does not display the recent previous projects. It was as if everything got zero including my preferences. I tried to open my project that has titles in first pro cs5.5 accidents and she immediately. I then try just open a blank project and all is well. While in this empty project, open the titration module causes an immediate crash.
Now, I still have first pro cs5 on the computer so I'll and open an empty project in cs5 and everything's fine. I try to open the module of titration in cs5 and everything's fine. I try to open in my project with securities and well-functioning cs5.5 cs5. It opens and works as it should. But of course, it's a real pain because my cs5.5 after effects sequences are not backward compatible. I reinstalled first pro cs5.5 and tried everything again (above), but met with the same results. I have the latest version of windows and Quadro 3800 NVIDIA updates. I've been editing on this system for almost a year with cs5 and 3 months with cs5.5 (production premium)
Specifications of the computer:
Office high i7 2.8 gHz
Qudro 3800 with last orders
Professional drivers latest window 7
24 GB ram
7terabites of hard disk space.
.

Thanks to Bill Hunt and his article and tread on the corrupted fonts, I was able to find a solution. In fact, it wasn't a police problem, it was one obscured 5.5. file that was bad. Bill that included in his thread. File: 'workingset.prsl' found in the mydocuments/adobe/premierepro/5.5/styles folder.

I first moved the file out of the folder and first pro 5.5 module titration. He started very well without any problems. I was able to open my previous projects which involved that I wasn't able to open before the titration module. Regenerates the file in the folder styles. I can remove the old file prsl.

Premiere Pro Cs5 Crash on launch

Last night it was working fine. I've updated my computer and restart, left, came back this morning and now none of my work in Cs5 programs.

Fonts can cause problems. First of all, corrupt fonts may cause launch crashes and Titler breaks down. Then, there are some fonts that are not corrupt, but work well with Adobe products. Such a policy comes from systems SunMicro and installs with OpenOffice - Deja Vu. There are probably many, many more. Some fonts, such as Isabelle and Isabella (by some foundries different too), will not cause problems, but simply not display correctly in many applications Adobe.

Fonts - you can't live without them, and it is sometimes difficult to live with ' em, especially some.

Please report to us and good luck.

Hunt

PS - this ARTICLE covers a few issues with the module titration (may also apply to launch), but is very focused on the PC.

I can't change to 100% view

I'm working on a huge video (1920 x 1200). Content is made too small to display in the default view, which corresponds to the video in the window. Fortunately, I can just click right in the area of the clip and choose a magnification - 100%. Splendid.
The problem is that I have a video track with a title. This title consists only of the forms which I use to hide certain information. I would like to change the forms of title so that I can refine their sizes and positions. When I change the track, the view moves immediately to the best fit, which is impossible. I would like to expand to 100%, so I can better place the shapes.
Is there a way to edit the title to 100%?
Kevin

No, I thought that I had tested, and to my surprise, it worked. What I do is have both the opening of the program monitor (at 200%) on a monitor and the module of titration open on the other - however, it is in PrPro, where you can have any number of monitors, as well as the titration module open at the same time, just so long has one that has enough real estate screen or toggle between the views. Forward (at least until version 4), there is no such thing as the possibility of having several screens open at once. I thought I had found a magnification in the Titler too (was grinning big time), but had accidentally left the program monitor and did not know that my palette title disappeared. I only want the module titration (in both programs) had magnification and only for the reason that you do. In PrPro, I have a workaround simple w / in order to use two monitors and two monitors (to the program) to use.

Hunt

Matte - hiding

Hello
I use the first CS3
I'm trying to get rid of a handful stand that sits in my shot on a green screen clip... I made a gesture of match on the green screen (dolly with right pan of talent thrust)
Finally, I want to key on the Green and use a 3d model with this clip...
I got a tutorial that shows how to use a matte (module titration created in circles) to soften the face slightly, bride without bluring the eyes and mouth... and I can not find. Does anyone know where it is? I think it could be a tutorial adobe (sample)?
I tried to use a cache of transparency, but it seems to be now way to reverse it... I put the issue of garbage around the stand of the handle and follow up OK but could not find a way to reverse it so that I get rid of the stand and keep the rest.
I am just teaching how to make this match things using 3D is not so important... not for a customer or something... but still, any help would appreciated
Stem

The cache of transparency around the subject, not the problem (IE not the booth)

.

CS3, why Titler often crash first?

I use externsively in my projects titration module, but still with some trepidation and fear (and save the project after each use ). Why? Because the module titration, more than any other operation first, first accidents without warning. Click on a button and I'm watching the office. Sometimes I'll get a box of "First must now close", first.
I had the same problem with the .ptl 6.5 titration module, but I thought surely - surely at the time when the product was going through 7.0 to CS3, someone would have fixed it.
Thanks for any idea.

With the exception of the situation declared Jim (never met who, but then I do all my Captures, unplug everything, then change, then I would have probably not seen it), I agree that the most often encountered an accident reason is a corrupt police.

Titler is much more sensitive to bad/corrupted fonts, than anything else by Adobe. I had a wrong font, installed put Titler on my knees, when PS, AI and InDesign worked happily with this same bad police.

I use Extensis Font Doctor (part of my Suitcase font management system, but available as a stand alone) to study and fix all the fonts on my system. It will go to my direction and lifted all 10 000 fonts in different folders (only a few hundred never installed at the same time) and give me a report. He'll probably repair most and then propose to provide me with full info (so I can get another copy) and delete those that can not be repaired.

FontFrenzy (freeware, but you should I write it) is good at finding bad fonts and repairing them also. [Make sure you click the correct download link as there are ads on this page!]

There are also fonts that are not "bad", they are BAD for the titration module. Deja Vu (included in OpenOffice SunMicro systems) is the one we've been warned. There are probably others too. [Thanks to Jeff Belluno]

While there could be other causes of accidents for the titration module, the fonts are the most common problem. Clean all fonts bad, BAD or corrupt, and you probably have resolved the issue - oh and make the advice of Jim and unplug your camera.

Good luck

Hunt

Satellite L775 doesn't work anymore - 5 short beeps

Hello

My laptop Toshiba Satellite L775 is no longer works and 5 beeps at startup.
Another tested processor-> same result

a solution? will map this HS mother? If so where to get one?

Thanks in advance

ludonly, France

Hello

Please keep posting in English.

Regarding the question:
I recommend you to check if this problem module s RAM. The failure of RAM can lead to the same start-up problems.
If the RAM modules are OK, the motherboard could be defective and must be replaced.
But the new motherboard is very expensive part. I think you need to spend around 250-350 for such a remedy.

However, new motherboards can be ordered from local authorized maintainer or online dealers.

cRIO

for the installation of the software cRIO 9066

I have cRIO 9066 and after the installation of device drivers, I am able to see the
cRIO on MAX device. Now the question is that I'm not able to install the software
on the cRIO. When I go to any module installation (even a single),
It is not installing and indicates that the
"cannot continue because of the following unresolved dependencies"
then the name of dependence (depending on what I wanted to install)
"likely the reason: real time support of the feature for this type of target can.
not be installed. »

I have labVIEW 2012 and 2013, as well as FPGA and RT, please help modules
solve me this problem. module cRIO status LED blinks twice.

Which version of the driver RIO do you have? The minimum software support for the chassis is technically LabVIEW 2014 but driver versions are more important.

Problem module titration

Similar Questions

Maybe you are looking for