Problem not identified in the Windows Firewall settings

Similar Questions

• For some reason not identified, cannot display windows firewall settings

  On startup, I get a pop up Windows Firewall saying that for an unidentified reason, the firewall settings Windows cannot be displayed.

  When I hit ok on that message and try to open the control panel Windows Firewall, the pop-up message would once again, and I won't be able to see the firewall settings.

  This does not happen every time I restart my PC, but most of the time he does.  When this happens, and sometimes if I wait 10 to
  15 minutes and try again to open Firewall Windows from the control panel again, I am able to see my firewall settings.  Could someone help please?

  Thank you.

  System information:

  XP SP2
  AV installed: Avira, Malwarebytes Anti-Malware

  Analysis with MBAM already, please make sure that the computer is clean. I guess your Avira is the free version, so it is not a firewall component. You might want to look at this information by MVP Ramesh:

  http://WindowsXP.MVPs.org/SharedAccess.htm

  MS - MVP - Elephant Boy computers - don't panic!

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Under XP, cannot turn off the Windows Firewall settings tab is not available

  My operating system is windows xp (sp3). The firewall is turned on. I want to disable my firewall. But, in my windows firewall set or disable tabs is inactive. Why is this idle setting? What can I do to turn it off?

  Hello

  · Will there be any changes made on the computer before the show?

  You can run the fix it from the link below and check if this can help: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

  Also access the link: you cannot enable or disable the Windows Firewall on a Windows XP Service Pack 2 computer setting: http://support.microsoft.com/kb/914230

  Note: A Firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

• Can not enter the Windows Firewall settings

  Hello

  Can someone tell me what my problem is? When I try to enter my WF in the Panel, he won t let me do that. A message just because of an unidentified problem, windows cannot display only my windows firewall settings.

  Because of the informative posting, I would say you should ask Microsoft why you aren't able to open the firewall settings.

  If you're ready for a serious debate please let us know which mode of laptop you have, which OS is preinstalled it and which antivir application you use.

  Good bye

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• Firefox 28 not listed in the Windows Firewall Exceptions

  I am running SP3 Windows XP Prof, Firefox 28 and Windows Firewall.

  I recently noticed that Firefox is 'slow' loading and connection to Web sites.

  I checked the 'Exceptions' list in the Windows Firewall, but Mozilla Firefox did not appear. Why Windows Firewall application doesn't have access during the installation of Firefox? Internet Explorer was not either and that my original browser browser and becomes 'slow', that's why I changed to Firefox.

  Moreover, since 'Add' and 'give permission' for Firefox, it runs a lot faster.

  Thanks John!

• Error: 0x8007042c when you change the Windows Firewall settings

  Original title: error code: 0x8007042c

  After the updates have been installed windows Sp1. my Windows Firewall failed to start. I have put all my default firewall setting. I tried to force it to manual startup. It fails every time. I get an error code: 0x8007042c. I am running System Mechanic Pro 10. I'm trying to get the mech system for launch and there as well.

  Hi diverken52,

  ·         What is the operating system installed on the computer?

  Check to see if the following is useful.

  Method 1: Run automated troubleshooting and check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2: If you are using Windows 7, you can read the following article.

  Error message "firewall Windows cannot change some of your code 0x8007042c settings error" when you try to activate your Windows Firewall

  Respond with more information so we can help you best.

• the Windows Firewall settings

  I want to download any file fron net using a downloader
  but at the same time, I want to block this Downloader to download all the data.
  How should I configure my windows firewall?

  http://articles.TechRepublic.com.com/5100-10878_11-6098592.html

  Read the info on the link above re the Options Vista Firewall Advanced for incoming/outgoing traffic.

  See you soon. Mick Murphy - Microsoft partner

• I can not turn on the windows firewall through firewall dialogue general tab; ideas?

  The Firewall tab is grayed out and will not...

  Thanks TechGeek2, that worked!

  JR

  You are welcome. Please take the time to mark my post as the answer to help others with the same question when they search MS Answers.  Good navigation!

• Firewall Windows isn't the default firewall, that maybe it's because another firewall service is installed or because the Windows Firewall is disabled.

  Today, I ran a stack of Microsoft Fix it programs.

  It was performed several times and was not able to get the windows firewall the firewall by default or to recognize as being on.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  Diagnose and automatically fix problems of Windows security
  Hide the last execution results
  Past performance results (Friday October 7, 2011 15:13:03)

  Windows Firewall is not the default firewall	Not fixed		Other Solutions
  Activate the anti-phishing filter	Checked		Other Solutions
  User Account Control (UAC) is turned off	Checked		Other Solutions
  Antivirus software	Checked		Other Solutions
  Status of antivirus software	Checked		Other Solutions

  Firewall Windows isn't the default firewall, that firewall Windows cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled.

  When you view the control panel > windows firewall, the firewall is enabled (recommended)

  Recently, I uninstalled McAfee Antivirus and installed Microsoft Security Essentials.

  Please indicate how to troubleshoot, and windows firewall to be the Firewall default or recognized under the name away.

  How to test the firewall to see if it is or it is not working properly?

  This problem has been resolved.

  The MSE has not recognized that the windows firewall was conducted.

  This problem has been resolved by running McAfee software removal followed by uninstallation tool and relocation of MSE.

  After reinstallation, I rebooted and the updated definitions.  He reported no problems with the Windows Firewall or the absence of firewall or at risk.

  I ran a full scan of MSE and we found no malware.

  For others who may have the MSE/firewall problem run followed by appropriate software removal tool to uninstall and reinstallation of MSE.  It takes time, but it worked.

• The free AVG antivirus program disables the Windows Firewall? Is it safe?

  I have Windows 7.  After you download the program AVG free anti-virus, the Action Center tray icon will display a warning indicating that the Windows Firewall is not enabled. After checking the Windows Firewall settings in the Control Panel, this message appears: "Windows Firewall is disabled or badly adjusted upward.  If I click to re - turn on the Windows Firewall, the center of the Action WARNING disappears.  I don't think that there is a firewall that is included in the free version of AVG.  Is it safe to leave the Windows firewall stops?

  No, it is not without danger. You should have a firewall running. A firewall running on the PC, such as WIndows firewall or a firewall on your router, or preferably both.

  I don't use AVG can not tell for sure re its features recent firewall, but at the time where I use it on an old PC it doesn't have a firewall in the free version.

  Which AVG have you loaded, AVG9, 2011, 2012? and where did you?

  You can test your firewall here (or similar sites) click https://www.grc.com/x/ne.dll?bh0bkyd2 go ahead and run the common ports to test (at least). If the firewall is running ports report . If they bring or then it is not running.

• How can I get rid of norton and activate the windows firewall?

  I'm trying to uninstall Norton so that I can install Avast.  Norton seems to have disappeared, but now I can not turn on the Windows Firewall.  It is said that this function is controlled by Norton.  I use a laptop HP 2000.

  Can someone help me?

  Thank you!!

  Hello

  Download and run the Norton Removal Tool relevant to your particular product from the link below.

  Norton Removal Tool.

  When the tool has finished, restart the laptop.

  Kind regards

  DP - K

• I get an error of 0x8007042c code when I try to turn on the Windows Firewall.

  Original title: firewall of windows 7 is not not useful

  can not turn on the windows firewall 7 on Dungeon receives an error of 0x8007042c

  I tried many other suggestions, without success. Help would be very appreciated

  See the Microsoft Knowledge Base article to resolve the error of 0x8007042c - http://support.microsoft.com/kb/2530126

  Jim