Problem of blue screen in windows vista, pack 2, 32-bit service

Similar Questions

• Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

  The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

  Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

  Acrobat Connect Pro data sheet

  I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

  It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• I have the product key for windows vista home basic 32-bit service pack 2 but no cd, please help me

  I have a right problem, my computer laptop need to format I have product key for windows vista home basic 32 bit service pack 2 but no cd, please help me

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Is not start the BITS on Windows Vista Home Premium 32 bit service

  I'm unable to start the BITS service on my computer.
  I use Windows Vista Home preimum 32 bit OS.

  I tried the following solutions that I found here.

  (1) sfc/scannow
  Result:
  =====
  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  (2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.

  I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.

  When I start the BITS service, I receive the following error message.

  Please suggest me how to solve the problem.

  The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Concerning
  Yannick DEVOS

  I tried to run the Norton removal tool.

  No luck.

  Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.

  Thanks for your great support.

  Concerning
  DeVos

• Blue Screen in Windows Vista, BCCode: a

  Now start the system error codes:

  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 81E3383C
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Here are the error codes since the last start of 'good' - these are the first BSOD codes and they were different from what I mean now:

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini041112 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000007e
  BCP1: C0000005
  BCP2: 00000000
  BCP3: 8A7677E8
  BCP4: 8A7674E4
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: c649a906-a42d-406b-9549-6f7f54e0a9a6

  All you can provide diagnostic information would be useful!

  1. no changes have been made on the computer before the show.

  2. the PC allows me to log on, but he did not finish before she lifted the IRQL_NOT_LESS_OR_EQUAL error such as a STOP message on loading Windows Vista blue screen.  Then it will allow me to start mode without failure, but only without a network.  I did a system restore to what I thought, it was a good point and then for a week before the show, but nothing has changed.  The problem persists.  I also used advanced Startup Options (F8) and tried to get to the last good known Configuration, but the same thing happens.

  I think this is material - I opened and cleaned it out, reinstall memory, Reseat the video card.  I think it's time to take it!

  Thanks for trying to help.

  Ellen

• Blue screen of Windows Vista 64

  This problem started occurring after the system has been reformatted.
  Since the reformatting of drives, the system has been crash a lot, was the last crash.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 24
  BCP1: 00000000001904AA
  BCP2: FFFFFA600C81F3E8
  BCP3: FFFFFA600C81EDC0
  BCP4: FFFFF80001D83369
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Please note; I can't download updates.  Doing so blocks a host process, and it is more downloads.  I am also unable to Service Pack 2 installed, even with a program of stand-alone installation, when you attempt to install, he said: the system is not ready, or it hangs the computer.

  Hoping you can help me.

  Here's another error blue screen that has just occurred;
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80033A6BC0
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Hello

  There were problems before you re-installed Windows?

  Given that you did do a re-installation means that the causes are mainly hardware, BIOS, low-level chipset
  drivers or other drivers and programs that load low level.

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites. This may not help but it's worth a shot. Don't forget to check the wiring and
  Rigorously test the hard drive.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------

  The most likely causes are the hard drive problems, wiring or a problem of hard disk (on the motherboard) controller. Some
  antivirus/antispyware/security programs could play a role. See message methods to test the
  course over ground.

  BCCode: 24 stop Code 0 x 00000024

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.

  Solve the problem

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  BCCode: 24 stop Code 0 x 00000024<-- read="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html

  -----------------------------------

  BCCode: 1a 0x0000001a

  The main cause of all who's memory probems if there may be other causes.
  See the test article in the next message memory.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test.

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Constant mini dump of blue screen in Windows Vista

  When I'm at work on our public wireless network, I have connection problems, eventually leading to a mini blue screen dump.  I can stay connected for 4 hours or 4 minutes... it oscillates continuously.  I checked and updated my NVIDIA driver and have current BIOS. When on my home network (encrypted) wireless I never have this issue.

  Below error code:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 7f

  BCP1: 00000000

  BCP2: 00000000

  BCP3: 00000000

  BCP4: 00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini110309-02.dmp

  C:\Users\Kevin\AppData\Local\Temp\WER-57595-0.SysData.XML

  C:\Users\Kevin\AppData\Local\Temp\WER3DAB.tmp.version.txt

  Read our privacy statement:

   

  Hello

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows to see updates
  If all drivers have been updated it just before what is going on has begun.

  For 7f - this might be a problem of material such as uncomfortable cards or memory, while there are other causes.
  Power electric low could also lead to this. Use the troubleshooter below and when you get to the drivers and
  segments of memory refer to my next post and then return to if necessary troubleshooting tool.

  Cause

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  --------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• blue screen with windows vista

  Hello! yesterday a blue screen appeared on my compaq 6830 s with windows vista. I used view bluescreen

  Here's what I read:

  Mini063015 - 01.dmp 30/06/2015 1.33.33 0x0000000b 0x000000c5 DRIVER_CORRUPTED_EXPOOL 0x00000002 0 x 00000001 0x822f5010 ecache.sys ecache.sys + 17c48 special memory device Cache Microsoft® Windows® operating system Microsoft Corporation 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) 32-bit ntkrnlpa.exe + 4dfd9 ntkrnlpa.exe + ee010 ecache.sys + b142 ntkrnlpa.exe + a71fb C:\windows\Minidump\Mini063015-01.dmp 2 15 6002 133.792

  CLASSPNP. CLASSPNP SYS. SYS + fcbc5a48 0x83a27000 0x83a48000 0 x 00021000 0x49e01ee9 2009-11-04 6.39.05 class System Dll Microsoft® Windows® operating system SCSI 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\CLASSPNP. SYS
  Ecache.sys ecache .sys + 17c48 0x8bba2000 0x8bbc9000 0 x 00027000 0x49e01f2c 2009-11-04 6.40.12 Microsoft® Windows® operating system special device Cache Memory 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\ecache.sys
  iastor.sys iastor.sys + fcb9cb1c 0x83a50000 0x83b2a000 0x000da000 0x4bba0dee 04/05/2010 18.21.02 Intel Matrix Storage Manager driver Intel Matrix Storage Manager driver - ia32 8.9.8.1005 Intel Corporation C:\windows\system32\drivers\iastor.sys
  MUP.sys mup.sys + d023 0x8bb93000 0x8bba2000 0x0000f000 0x49e01914 driver Microsoft® Windows® operating system Multiple UNC Provider 2009-11-04 6.14.12 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\mup.sys
  Ntkrnlpa.exe ntkrnlpa.exe + ee010 0 x 82207000 0x825c0000 0x003b9000 0x4b7d1e08 18/02/2010 13.01.28 Microsoft® Windows® NT Kernel operating system & 6.0.6002.18209 (vistasp2_gdr.100218 - 0019) Microsoft Corporation C:\windows\system32\ntkrnlpa.exe

  How can I solve the problem? Thank you

  Wow, you've been crashing for a long time.

  1: kd > .bugcheck
  Error checking code 000000C 5
  Arguments 0000000b 00000002 00000001 822f5010

  1: kd > knL
  # ChildEBP RetAddr
  805ec89c 00 822f5010 nt! KiTrap0E + 0x2e1
  01 805ec958 8bbad142 nt! ExAllocatePoolWithTag + 0x4ca
  02 805eca0c 822ae1fb ecache! EcCacheBootPopulateCompletion + 0x1d2
  03 805eca40 83a2cd5f nt! IopfCompleteRequest + 0x11d
  04 805eca48 83a2c3ee CLASSPNP! ClassCompleteRequest + 0x11
  05 805eca74 822ae1fb CLASSPNP! TransferPktComplete + 0x2b6
  06 805ecaac 83a94fc9 nt! IopfCompleteRequest + 0x11d
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  07 805ecb1c 83 has 55285 iastor + 0x44fc9
  08 805ecbbc 83a562f9 iastor + 0 x 5285
  09 805eccd8 83a9508f iastor + 0x62f9
  0a 805ecce8 822b16c2 iastor + 0x4508f
  0b 805ecd50 822af89d nt! KiRetireDpcList + 0 x 147
  0c 805ecd54 00000000 nt! KiIdleLoop + 0 x 49

  The storage technology Intel Raid driver corrupted pool system, which caused an attempt to access invalid memory at an IRQL that was too high. In our case:

  1: kd > .trap 805ec89c
  ErrCode = 00000002
  EAX = ebx 00000007 = 8230971c ecx = 8233f140 edx = 00000000 esi = 823096e0 edi = 880e29e0
  EIP = 822f5010 esp = 805ec910 ebp = 805ec958 iopl = 0 nv up ei pl nz ca po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00210212
  NT! ExAllocatePoolWithTag + 0x4ca:
  822f5010 895804 mov dword ptr [eax + 4], ebx ds:0023:0000000 b is?

  About the unhandled, exception generated by the TSRI driver corrupting the pool when he allowed it, he would lie ebx to the value stored at the address of eax + 4. contents of EAX look pretty fake to me (00000007), is whence the crash.

  1: kd > lmvm iastor
  start end module name
  83a 50000 83b2a000 iastor T (no symbol)
  Loaded symbol image file: iastor.sys
  Image path: \SystemRoot\system32\drivers\iastor.sys
  Image name: iastor.sys
  Timestamp: Mon Apr 05 12:21:02 2010

  Very old driver.

  Try to update the driver of the TSRI first of your manufacturers website and if not lucky, follow my guide here to remove it. Even if you're running Vista, it should still work if all goes well - http://answers.microsoft.com/en-us/windows/wiki/windows_7-hardware/uninstalling-the-intelr-rapid-storage-technology/e3c4b6d6-56ba-4ac5-be50-89843c9d9b22

• Power failure blue screen of Windows Vista - driver

  Hi all

  ASUS laptop computer under Win Vista Home 32-bit Edition. Have 2 problems:

  1 power driver blue screen failure.

  Please see my 2 Dump files to:

  https://www.dropbox.com/s/5c4subvkhw2lryf/Mini031615-03.dmp?DL=0

  https://www.dropbox.com/s/qsd0nv61yer4e3b/Mini031615-04.dmp?DL=0

  After studying this problem it seems it has to do with the USB drivers? I have no yellow question mark in Device Manager.

  (a) it - I have to refresh battery USB? If yes pls show me how?

  (b) do I avoid Windows update to reinstall the drivers on the original from ASUS drivers? If yes Pls tell me how?

  (c) do I reinstall the drivers Asus? which device?

  The problem could be related to a HP mouse wireless connected to the laptop?  It always worked fine until I disconnected and reconnected.

  2 laptop won't wake up from sleep, I have to use the switch to close.

  Appreciate your help.

  OR

  There are two related issues here.  First associated with snp2uvc.sys generic PC Camera Driver and secondly to Kaspersky.  I update the reader of the camera (your is 2007) aware and remove Kaspersky and replace it with MSE >

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials if you use vista or win 7.  If you are using win 8 or higher, I would use the built-in Defender.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• Blue screen on Windows Vista

  OK, now here is the problem. My laptop dell Inspiron computer running windows vista will be randomly blue screen of anywhere between 15 minutes of use to 6 hours of use.

  It is very important for me to have my laptop works well, I reinstalled my OS and returned my laptop to factory settings, then does a not reinstall all programs on it and then left on to see if this fixed the problem. There can be no.
  All my drivers are up to date, it says on the error message for me to disable the in-memory cache and the cloak, but what I gathered people is not what you need to do and instead of uninstalling programs. Pretend that I have not installed programs is not a fix for me. I am currently using this computer to write it, so it works very well at all other times, and this blue screening time is completely random.

  Hello

  The problem may cause due to failed hard drive. I suggest to run the disk check and check if the problem persists, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Also I suggest you to download the files from "C:\Windows\Minidump" mini dump on the jump:

  http://explore.live.com/Office-Web-apps-upload-documents-using

• Intermittent blue screens on Windows Vista

  OT: intermittent blue screens

  Original title: crashing Vista

  Hello, y at - it anyone out there?... Running Vista Edition family Basic. System hangs regularly. A downloaded Avast Element 5 anti-virus and concluded that problems which have been quarantined. I ran several scans and nothing is displayed. Today, I got a blue screen when you exit the e-mail (Windows). On Thursday last, everything went very well. Friday and today I am back to crashing. Anyone have any ideas?

  Hi jonnyd.lee,

  (1) you get an error message?

  (2) since when you experience this problem?

  (3) remember to make changes?

  Method 1: You can follow the steps described in the article below

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: You can see the steps outlined in the article below

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article applies to Windows 7, not valid for Windows Vista)

• Blue screen on Windows Vista 32 bit

  original title: difficult question. I'm a geek from the BACK! Mobile woman with Vista 32 bit on it a blue screen.

  HP laptop,

  Video card problem so I use an external monitor to the computer to access.  Does not start in safe mode.  No new software or hw.  Tried to let the os to resolve.  Could not.  I get this message when booting normally page fault in nonpaged area and it crashes.  tried to laucnh... Startup Repair can not repair it.  I want just the data off the drive. I tried to put in my other computer in the car and did not help.  This laptop model HP is notorous for video card fail, that's why I'm sure that the internal display of the laptop does not display data.  Using the external monitor to display the screen.  I just want the data and once it is sure going to re-install o/s to see if the VC is dead or if it is a question of gibber.  Oh... System Restore may... tried that too...

  Hello

  Check with HP support, their documentation online and ask in the forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================================

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner