Problem of fuzzy set, gel and launch with a GPU on board with the AMD Radeon HD D 7560

Similar Questions

• Need help with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics

  I recently bought the 15z-j000 ENVY and updated with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics. I wanted the dedicated HD 8750 M for games and whatnot. When I opened first to the top of my new laptop, I did a clean install of Windows 8 from a USB key. This completely erased all of the HP preinstalld drivers, software, etc.

  I installed the beta drivers for my laptop from the site Web of AMD.  Here's my problem. How will I know that my dedicated video card working properly? I ran a few games and they seemed to do as well. But when I checked my system with CPUz and dxdialog it says that I was running the graphics card integrated. How does the dual graphics and how can I make sure I take advantage of my dedicated card. An explanation of the depth and how for the use of the AMD solution dual graphics card would be apprechiated.

  I'm no expert on the switchable graphics, but you find the answers to your questions in the Overview of the switchable graphics or Dual GPU or switchable on portable graphics equipped with double GPUS and AMD.  Be forewarned however, documents were written for the HP PC using the appropriate HP, drivers if you use the Beta from AMD drivers, then documents may not match what you see on your system.

  R

• Problem with the AMD Radeon HD M 7730 Inspiron 7520

  I just got my new laptop Inspiron (15R) 7520, when I watched the display settings in DXdiag and in dell support center it says I have the Intel HD Graphics 400, when I had to get the AMD Radeon HD M 7730 graphics driver, I asked a friend who said he could be in there but its not picked up Anyone know why?

  The specs for the laptop are here: http://www.dell.com/au/p/inspiron-15r-se-7520/pd

  That's what dxdiag shows me:

  

  Switchable graphics do not work, you can hear intel HD4000 on the parameters of the program to start with (and on the win7 experience index), but once you are in the program/game the computer will use the 7730 m.  Programs like 3dmark06 and games like Skyrim will show intel HD on the initial configuration page but the 7730 m should then launch - an easy way to see if his job is to compare the performance with her was put in power save instead of perfromance and you will see a difference in frame rates...

• Problem with the AMD Radeon in Envy 4 1209tx graphics card

  I use a 1209tx desire 4 which is supposed to come with an AMD Radeon HD 8750 M graphics card. However when I go into the graphics settings, the control panel of the Intel HD graphics card comes back. Does this mean that my laptop is not equipped the AMD graphics card? He also says that my GPU is Intel HD Graphics. Forward your comments. Thank you.

  The content of the download is corrupted and the driver must be downloaded again (until you do not receive this message).

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• SYNCHRONIZATION PROBLEM TRYING TO RECORD AUDIO AND VIDEO WITH THE LIFECAM VX-3000

  I use Windows 7 and have 2 GB of RAM, but when I record on my hard drive with the LIFECAM VX-3000 reading is slightly, but apparently out of sync.  Does anyone know why?

  Thank you

  Tony Cash

  Hi Anthony,.

  Although that do not know what could be the cause, here are a few things you can try.

  1 see if turning off the background tension or lowlights helps solve the problem of synchronization. See the webcam of the help manual.

  2. lower the screen resolution. Reference: change your screen resolution

  3. install the latest version of the software of the webcam.

  You can get the software here:http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=68A-00001&os=Win7_3264&lang=en

   

  For more information, see:

   

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  4. make sure that you have installed the latest drivers for your video card and sound card. See the documentation for your hardware manufacturer or a web site for more information on how to update the video card and sound card drivers.

  For updates of the driver, see this link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS6 works with the AMD Radeon GPU 6970?

  I am currently using CS5.5 on a MacPro 1.1 version and given the CS6 upgrade that requires a 64-bit on Mac OS.  So I would get an iMac 27 ", but the GPU only offered are AMD Radeon 6770 M and 6970M, did someone at CS6 on iMac and how does it work?

  Thank you

  Well, it 'works' that she will support the fast previews and other features, it will not support just GPU raytracing. See the tech on the product page for AE.

  Mylenium

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Yahoo mail problem. Error Msg says low resolution and looped past. Resolution is set correctly and it is application of onlyyahoo that gives the problem.

  Loading the homepage of yahoo okay. The mail page works in chrome, but not in firefox. I checked the settings. Yahoo seems to define its own display options. Once the loading of the page mail it alternates between the error message and the Inbox in a loop.

  Everything is ok on chrome. It loads with the disolay fitting the screen unlike in firefox where the pages are wider than the screen. T

  You are welcome.

  Firefox is not automatically zoom in.
  
  You can have zoomed a page on this area by accident in the past by pressing the Ctrl key and scrolling with the wheel of the mouse or Ctrl and more (Ctrl + +) (Firefox remember zoom of page by area).

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html