Problem on Photoshop 3D objects. Help ~.

I created on Photoshop 3D objects, but he battled all of a sudden. When I open the file recovered, my objects become without color or texture like the following picture and there is a layer in front of my stage? (like the picture below) Anyone know what to do exactly? Help please ~Screen Shot 2016-04-23 at 5.45.35 PM.png

I turn my visible background,

Screen Shot 2016-04-23 at 5.53.55 PM.png

It seems that it is a problem that deals with the brightness? contrast?

As I change the camera (from the left to the top of the corner), I found the camera of the left hand towards the high side always displays the color correctly as the following picture:

Screen Shot 2016-04-23 at 6.34.47 PM.png

Screen Shot 2016-04-23 at 6.35.08 PM.png

So what's the problem here? Anyone know?

NVM... I found that it is because of my opacity setting is 10%... It is fine when I tune back to 100%. Thank you for helping

Tags: Photoshop

Similar Questions

  • problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help?

    problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help? I tried my default preferences of rest, it did not work! need for this problem!

    I gave a sort of special authorizations, the reading and writing have been already checked, but it seems to work now, thx

    "Follow these steps:

    • Quit Photoshop
    • Navigate to the location of the settings Adobe Photoshop CC2015.5 folder manually.

    Location specified in this article depending on your OS: preference file works, names, places | Photoshop CC 2014

    • Make sure that the Configuration of the CC2015.5 folder has full read and write
    • Restart Photoshop and then check. »
  • I have a problem with photoshop cc in windows 10

    Hello

    I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

    I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

    Screenshot (30).pngScreenshot (31).png

    Screenshot (32).png



    I really hope that anyone kno w s, what the problem is and can help!

    Hi Editjo,

    Greetings!

    This seems to be a graphics card problem.

    Please disable the graphics processor in photoshop, and then try again.

    Open Photoshop

    Click on edit-> preferences-> Performance

    Uncheck use graphics processor

    Click OK

    Close Photoshop and re - open and then use the way you did that.

    Also, please share the exact version of your Photoshop.

    Concerning

    Jitendra

  • Wacom Cintiq 27HD Touch and problem of Photoshop CS6

    I have problems with Photoshop CS6 and my Cintiq. I have off contact. When I use a tool such as the brush in photoshop and then change after you have entered the text or cancel, or another tool or feature, my wacom pen does not respond. Anyone else have a problem with Photoshop CS6 and Cintiq 27hd touch? I'm on a Mac under OS X11.5.

    Restore default preference files

    Here's how to do it.

    Photoshop preferences

    Let us know if that helps.

  • Big problem with photoshop!

    Big problem with photoshop! 6 days ago, I expired trial version of photoshop for a month, four days ago, I purchased a monthly subscription only for photoshop, after trying the steps written on the adobe page, yet I can't use photoshop because it says "trial has expired" when I try to click on buy says 'already purchased package' but the problem is that even after having uninstalled and reinstalled all adobe problem reports. talk about the Mac in Photoshop version. Being the center of Italian service does not even exist in my language... Sorry for my bad English, I hope someone can help me!

    According to the information of your account you have not activated your Computer.Looks as something must be considerate activation.

    See Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications and follow the steps. /

    ~ Assani

  • There was a problem updating photoshop cc

    There was a problem updating photoshop cc, U44M1P7. How to solve?

    Hello

    Please see: -.

    "Installation failed" error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

    U44M1P7 error code

    Error U44M1P7: Cannot apply CS6 Adobe Extension Manager Update | Mac OS

    Hope this helps!

  • Digital art, files of large multi layers and increasing problems with Photoshop - advice please!

    Hi all

    I am a digital artist, who does about 90% of his work in Photoshop. However the gel, crash at launch and at the exit of RAM reviews (even on opening 1 small file) have become more frequent until this week I can't work at all.

    Records of work because they are implemented today:

    (1) 1928.11 GB (external)

    (2) GB 2560.76 (external)

    (3) F 286.17

    (4) 40.49 GB (boot)

    Although a lot of arrangement of these discs have all failed.

    It is not uncommon for me to work on the art that has 40 + layers in a document of 300 dpi (the 750MO PSD file size) 18 x 18 inches. (Even this does not end where JPG size for some of the clothing I hope to do my job). Again, for a year or two I did not seem to have any real problem with the files of this size. Originally, I was with WIN 8.1/Photoshop CS6. But the crash. Gel and off RAM review has progressed to the point that I had to stop and restart everything several times per hour often lose work - always lose time and focus.

    I have a specific computer for design only, so I have other things running while I'm working. My stuff of protection antivirus is up-to-date.

    3 weeks ago, I upgraded to Windows 10 and went ahead (despite having the full Creative Suite CS6 on expensive Disk) and a subscription that I can not afford for Photoshop CC. I want to get some relief from frequent problems. I don't have. The problems have got only worse/more frequent. I can only do one or two little thing in any given job. So, I have to stop or lose my job. This morning, I can not open a 47 MB file and a picture of 24 MB to bring it.

    As a bonus, since the "revaluation" of CC Adobe married now often hold for 10 to 30 seconds when scrolling. This has never been a problem in the past.

    I purge. I rearrange "scratch disks". I keep a historic minimum (4) States... All the things recommended in all of these items online on this seemingly common problem with Photoshop. I want it to work. I am not a technophile and feel like I have to return to college for a degree computer SCIENCE or art my work/income - in total. I am also very aware, it can just some obvious problem my artsy, non-tech brain does not see, so hopefully someone here can help you.

    Example: showing why so many layers are needed. Often much needed individual 'twisted' once again towards the end of the design work, so cant more be combined while I add them in.

    In clear simple any help would be greatly appreciated - single to the top of the preferences for the way I work in...

    Thanks, Nola Lee KelseyNaturalist-web nola kelsey.jpg

    Windows 10 - 32 bits, and that is the problem.

    A 32-bit operating system can use 3.76 GB of ram no matter how much you have, simple math - 2 ^ 32 = 4,294,967,296 bytes 4294967296 / (1 024 x 1 024) = 4 096 MB = 4 GB

    Solution to your problem - reinstall 10 64-bit Windows.

    ~ Rohit

  • 2nd monitor problems with Photoshop CS4 and CC

    I'm on a quest to solve a problem with my second monitor when using Photoshop. When I hit F in photoshop to switch between display modes or when I Zoom in or out this happens:

    IMG_2010.JPG

    OK, well it is turned on its side, but you get the point. Until very recently, I used OS x 10.6.8 with Photoshop CS4 with no problems but ran into some problems with applications etc so I upgraded to Yosemite. That's when the problem started. In order to solve what I did a clean install of Mavericks in the hope that Yosemite was too new and that he had not brought bugs. Then I reinstalled CS4 there more this problem, but another problem just as boring. the profile for the 2nd monitor appears so desaturated and terrible that I can't use it to edit, despite several attempts to recalibrate.

    Out of curiosity I tried the trial of CC in Photoshop to see if the problem of mosaic has been fixed, but it wasn't. Right now looked at color, but mosaic problem. Here is the info on my computer:

    Screen Shot 2015-02-04 at 4.01.28 PM.png

    I changed in system preferences > energy saver > graphics for better quality, but nothing has changed. In Photoshop, I tried Preferences > performance > the GPU settings > advanced settings > changed in Basic drawing and that did not solve the problem either. Any ideas?

    10.10 MacOS still has a number of video driver bugs, some causing display corruption and others causing accidents.

    Apple is aware of these driver problems and work on solutions.

    Turning off the use of Photoshop GPU can help.

    But if you need the GPU features, you can return to a stable version of MacOS.

  • Problems with Photoshop CS5

    Hi all

    I'm having a problem with Photoshop CS5, as you can see from the pictures the work area does not show anything.

    Does anyone have an idea of what could be the problem and what can I do to resolve this issue.

    Any help will be appreciated.

    Regards Andy.

    PS-CS5.GIF

    Try updating the video card drivers and if that doesn't work then try turning off the drawing OpenGL from edit-> preferences-> Performance

  • Small problem with Photoshop CS3

    Hi, I have a little problem with Photoshop CS3, I don't know if it's because only option of Windows that I messed up, but the thing is that I got in all the options, or some sort of preferences.

    http://img256.imageshack.us/img256/3554/62467600.jpg

    I don't speak of the 'little window' (I don't know the exact name) come, in this case, the filter and analysis options, they just turn right and usually, down it on their left side. It's really annoying.

    Not a big deal, but I can not really work properly. I hope you guys can help me, and this is my first post, I hope I don't break any rules.

    You have activated the left-handed Tablet support in your system settings. Turn the power off and everything will be back to normal.

    Mylenium

  • Phone numbers contained in the e-mails and the web links will appear for several seconds and then disappear. I use Yahoo mail, however, if I use IE 8, the problem does not occur. Help!

    Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!

    This has happened

    Each time Firefox opened

    Is whenever I use Firefox

    Tools > Addons > > Extensions

    You have the Skype for Firefox extension?
    If so, disable it. Known to cause this problem for many users.

  • My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

    problem iPhone 5s load is reduced to

    My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

    Please help me anyone

  • How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

    How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

    When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
    someone has a better solution that take care of this problem.

    Hello

    Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

    http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

    Hope the above information is helpful.

  • Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. T

    Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. Thank you.

    I just wanted to make account - it seems that the problem has been resolved. After another remove & reinstall it is operational!

  • Seit ich auf CC 2015 updated habe, kann ich in Photoshop Smart objects mehr öffnen, die von Illustrator importiert wurden keine.

    Hallo,

    seit ich auf CC 2015 updated habe, kann ich in Photoshop vector objects Smart mehr öffnen, die von Illustrator importiert wurden keine.

    ES scheint, als würde try Photoshop, Illustrator 2014 zu öffnen, obwohl now 2015 installed wurde. There are one possibility, das Zielprogramm neu zu compete?

    Beste Grüße,

    Tommi

    Habe eine Lösung found.

    1. in Illustrator eine Datei speichern und create x-adhesive.

    2 rights Maust auf Datei und die Standardanwendung fur das Dateiformat *.ai neu compete sharp.

    3 Auf Illustrator CC 2015 sites

    Fertig

Maybe you are looking for