Z800: 4 GB module unbuffered

Similar Questions

• These RAM modules will run in mode dual channel - Satellite A100?

  I have the Satellite A100 that supports dual channel.
  HYNIX HYMP512S64BP8-C4 (original modul memory supplied with the laptop)

  http://www.Hynix.com/datasheet/PDF/module/ds_512M_DDR2(B-ver) based_SO-DIMM (Rev0.2) .pdf

  and this kingston kvr533d2s4 / 1024 mb

  http://www.ValueRAM.com/datasheets/KVR533D2S4_1G.PDF

  They both non ECC unbuffered cl4 200pins 533 mHz ddr2 sodimm 1 GB but the TRA and tRC timings seem a little different.
  These modules of memory will work in dual channel mode?

  You will be very happy if someone As the same model of laptop and exactly these modules. I just recommend using modules of RAM recommended. These modules are tested and you will have no problem of compatibility.

  Kingston modules are very good quality products, and I believe that no one reported any compatibility problem. If you visit the Kingston's support page you can find all module compatible with your laptop.

  Check it on
  http://www.EC.Kingston.com/Ecom/configurator_new/mfrmod.asp?root=UK&LinkBack=http :// www.kingston.com/ukroot

• HP 700-149: care needed for modules DIMM Ram

  Hello

  I need to replace my RAM on my HP 700-149 due 800 000 errors found after the use of Mem86 +.

  I checked the user guide and it SODIMM modules specifications:

  (http://support.hp.com/ca-en/product/HP-ENVY-700-Desktop-PC-series/5395582/model/5425811/manuals)

  most of the other modules DIMM, so that they take up less space in the case. SO-DIMM modules must meet the following requirements: ● 204-pin DDR3-DIMM ● PC3-10600 (1333 MHz) DDR3-SDRAM ● Unbuffered, non-ECC (64-bit) DIMM maximum 1.5 V memory only 16.0 GB installable memory ● ● using 4 GB Modules. Actual available memory that can be used in Windows will be less. Because memory uses two channels, you must use the same DIMM type for the two casings

  Where is ther required for just DIMM?

  This computer uses Hynix.  I can't find that in my area.  Suggestions on brands that meet the same characteristics?

  Help?

  V

  Hello

  The link you posted is not valid for your PC.

• Voltage for modules of Pavilion dv7t laptop RAM

  I have a 4GB module and a 2 GB module (provided by the factory) in my dv7t-4100.

  I want to replace the 2GB card with another card of 4 GB.  I have two available, both for the same price and with the same specifications as stated except one:

  Specifications: DDR3 PC3-10600 • CL = 9 • unbuffered • NON-ECC DDR3-1333 • 1.35v 512Meg x 64 • • and

  Data sheet: DDR3 PC3-10600 • CL = 9 • unbuffered • NON-ECC • 1.5V DDR3-1333 • 512Meg x 64.

  Both claim to be compatible with my laptop.  Is it really important if I choose the map of 1.35 volts or 1.5 volts card?  We run more hot than the other, for example?
  

  Hello:

  I would go with what the Crucial site States as they compatibility guaranteed - 1.35v

  http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=A1B4BE8CA5CA7304

  You can read this article also of tensions.

  http://en.Wikipedia.org/wiki/DDR3_SDRAM

  Paul

• HP z800: hp z800 does not turn on

  I have a motherboard z800 in a first time, I ran a 4 core cpu with 6 GB of ram and it was great so I bought a bunch of assorted parts first I changed the processor cpu x 5650 and filled the modules of 4 GB of ram wih totalling 24 GB and I was running like a dream. so I put the 2nd processor corresponding to slot 1 and put another 24Go of ram from that point, he told me there was a problem with the first 2 DIMMS of the original processor which ran very well tested the ram in various modules DIMM and the problem has not deferred then I hit f1 and the operating system of entry back 2 days the system crashed and the custom post or beep me I take everything out and put the pieces in a both that I can get it to post again but it limits me to 16 GB of ram that I get all the pieces in one at a time, and then when im convinced that the problem is solved I turn one last time then no message or beeps. My motherboard is a model 003 for x56xx series cpu ram cpu etc are brand new, I am using a powersupply on it with a geforce gtx 760 1000w, I have a quadro 2000 on Eve whi I stuck in and still no post ideas or additional info you need please let me know im really scratching my head on this one.

  Hello

  Not all memory configurations are represented below. Also, 512 MB configurations are not supported for 64-bit operating systems.
  Only the ECC DIMMS are supported.
  RDIMMS and UDIMM memory modules cannot be mixed in the system.
  Do not install the memory modules into the memory slots if the processor is not installed.
  Configurations two-way with the modules of memory installed for a single processor is not supported.

  Please find the table below which would:

  

• Z800 upgrade RAM & GPU - HP Performance Advisor WARNING

  Hello guys,.

  I would appreciate if you can help me with this.

  HP Performance advisor, gives me the following warning:

  'Memory '.

  Maximum memory performance is achieved with a balanced configuration memory evenly distributed throughout all channels of active memory. When there is more than one DIMM connector per channel, fill the inner layer closest to the CPU before adding memory to an outer layer.

  Technical mixed size DIMM - memory is optimized when all the DIMMS in a layer have the same size. »

  
  I have attached 2 photos.

  The first is the current state of the workstation with mixed sizes of RAM 1 GB & 2 GB modules.

  I don't want to throw my 2 GB modules. I want to just replace the modules of 1 GB a 4 GB modules,

  so the configuration will look like the 2nd picture, I joined.

  Is this feasible?

  A second thing is I want to upgrade my GPU.

  Currently a Nvidia Quadro 2000 is installed.

  I want to replace the GPU with a Nvidia GTX Titan.

  What should I take the exam prior to the GPU upgrade?

  Thanks in advance.

  The configuration of your memory project (second photo) is OK.  If I read correctly the image, you put 4 GB modules in the black connectors and the 2 GB modules in the white connectors.  This gives a configuration balanced, that is, each channel has the same 2 types of memory, so that you will not get the message memory unbalanced and could even get a performance more.

  Make sure that the memory of 2 GB and 4 GB is of the same type, correspondence ECC (or not), registered (or not), and if the chips of memory are x 4 or x 8.  Mixture of different types of memory will not work.

  HP does not officially support the nVidia GTX Titan, but it should work with the following precautions:

  -It will run at speeds PCIe Gen2, Gen3 not (but this should be fast enough).

  -From the picture I've seen of the Titan, he seems to have a 2 x 3 and a 2 x 4 power connector.  The Z800 has 2 power connectors for 2 x 3 for graphics.  A cable adapter to go from 2 x 3 to 2 x 4 is necessary to put the card.

• Compatibility of PC3-12800E (DDR3-1600) without buffer RAM with HP Z800

  Hello

  I recently bought a Z620 and a Z800 (second two had, of course).

  The Z620 has 48 (6 x 8) GB RAM unbuffered PC3-12800E (DDR3-1600). I'm busy to remove the 16 GB of the Z620 and install them on the Z800, which has only 2 x 2 GB RAM.

  Please let me know if PC3 - 12800E (DDR3-1600) without buffer RAM compatible with Z800?  It doesn't matter if I have to remove the existing 4 GB of RAM.

  Thanks a lot for your answer.

  concerning

  Sabba

  At any time.

  I am pleased to have been of assistance.

• Adding RAM to an HP Z800 - how many slots should I use?

  I'm about to add more RAM to an HP Z800. The computer has 12 memory slots. Today, I have 12 x 2 GB RAM modules, IE 24 GB of RAM. The processors are 2 x Intel X 5670 (processor-core/6). I have the BIOS version 3.21.

  I want to upgrade to 48GB of RAM and wonder if I should buy 6 @ 8 GB memory strips or fill all 12 slots with 4 GB modules. Both options give me 48GB of RAM. So the question is if I lose any performance using only 6 of the 12 sites of memory and if so about how much? What is the pros and cons with the help of 12 locations compared to the use of only 6 sites while leaving 6 unused when fill a system with the same amount of RAM?

  Intend to purchase Kingston memory, 2 x KTH-PL313K3 / 24G or 4 x KTH-PL313SK3 / 12G.

  Any useful response is appreciated!

  / Roger

  Roger,

  Because the price is not the issue here, they are substantially the same, I would look in the documentation for the HP. Should I use mode memory channel single, double or triple with 6 or 12 slots populated? With 12 slots, you are sure to use the memory in triple mode, with 6 I don't know, but with only 6 slots populated, you have opportunities for expansion in the future.

  There is a definite advantage in the use of 48 more than 24 GB, but is it wise to invest in this memory with your specific mobo and CPU, or wait for the SB-E as an alternative with 32/64 GB of memory, although at much higher prices but with OC-ability, you must decide which.

• AfterEffects CS4 Crash on Output Module Windows Media

  After sitting on hold for 02:15 yesterday, I still have to discover humans work support, so I turn to this forum...

  I own CS4 Production Premium on an HP Z800 with sp2, XP64 and 16 GB, nvidia quadro fx graphics card 3700.

  Since installing several months ago, I was not able to use the rendering in After Effects CS4. When an item is in the record that, in selecting "Output Module", and then selecting "Format" drop-down, as soon as I release the button of the mouse on the "Windows Media" option, AE starts a routine predictable crash.

  

  

  

  Whatever the project, it's the same result.

  What is remarkable is the fact that I can run Adobe Media Encoder and make perfectly well to this format. But it of a middle man clumsy when I really would - and should be able to encode the project directly from AE, no SOUL. First also renders perfectly in this format as well. Only AE seems to crash upon activation of the Format-> that Windows Media fall down.

  I installed the 9.0.2 was last updated. I installed various MS. WME packages I uninstalled and reinstalled several times after all. The last alternative is to abandon the machine for TI guys to set up a new installation of XP64 again.

  Sure would be nice if I could talk to a support technician or get help to solve this problem ;-)

  Here's a thread that may help:

  http://forums.Adobe.com/thread/429333

  There seems to be some problems with Windows Media presets.

  Here's a thread on CS3 that seems to indicate the same thing:

  http://forums.CreativeCOW.NET/thread/2/971962

  I found these threads with this research.

  BTW, I'm not saying that it is related to this problem, but notes that 64-bit Windows XP is not one of the operating systems that we recommend for After Effects. Here is the Configuration page required.

• Server 5.2 php pgsql.so module does not

  After installation of macOS Sierra and Server 5.2, I find that Roundcube is no longer able to connect to a PostgreSQL database. I back down to the file php.ini configuration does not load the pdo_pgsql.so/pgsql.so modules. All the world has noticed this change?

  I see that the server still has its own php.ini file with extension to pgsql inside settings. However, the configuration of php is more load the server php.ini file, because it seems before. How could I do php load in the server's PHP.ini?

  I have this problem as well!

  It is very bad, I have a few site that using pgsql and they are now down until I'm looking for the solution!

• My modules do not work all of a sudden with firefox 43.0.1

  This morning, they worked; This afternoon they do not. the error message indicates that they can be verified. should each module be developed by its owner? What a mess! I use windows 7 and firefox 43.0.1.

  Firefox now automatically disabled addons unsigned for the safety of the user.

  Please visit these sections of Mozilla for more information on addons unsigned and how allowed them:

  • Module signature in Firefox
  • Decoupling of the comments since the signing of unlisted modules

  Warning: The steps above may present a security risk. Please use with caution and at your own risk.

  Please consider notifying the proponent of the addon on the issue, so that they can get their addon signed as soon as possible.

• control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  Said heavyoak

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  How is that what does strike you?
  https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/

  «We are implementing a new extension API, called WebExtensions...» »

  The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".

  So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."

• cannot activate or reinstall the security module of Avira (unsigned) browser to v43.0 FF

  Firefox has automatically (and without asking) disabled the browser security add-on Avira after my upgrade to v43.0. He refuses to allow me to re - activate. I then uninstalled and tried to re - install, but which is too rejected him - regardless if I have the xpinstall.signatures.required flag set to true or false.

  Is there another way I can get this add-on re-installed, or Firefox can simply no longer modules unsigned from v43.0? (If this is the case, it's unjustified behavior and too paternalistic, in my opinion, the user should have the last word on what can or cannot be added on.)

  I give it a try and I can see the issue.

  For security reasons, you are unable to install the extensions unsigned from any Web site. Instead, you will need to do the following:

  1. Go to the website of browser Avira Security
  2. Make a right click the Add to Firefox button
  3. Click Save Link As... "to save the XPI file to your hard drive
     
  4. Go to the Firefox addons Manager
  5. Click on the gear
  6. Select install the addon file
  7. Open the downloaded XPI file

  This should install the addon it correctly.
  Sorry if it is difficult or impractical.

  Note: You may need to restart Firefox for the addon to be installed correctly.

• How to move icons of the add-on at the helm the additional module at the bottom of the screen

  I have a number of modules, and the icons on some of them take a lot of space. So the navigation bar is stuffed full. I added the bar add-on that appears at the bottom of the screen. However, I did not understand how to get the icons module moved to the bar downstairs. I'm sure it's something very simple, but I did find the magic combination to do it again.

  I would appreciate any help/suggestions you can give me. Thanks for your help.

  I don't know if it's relevant, but I use two laptops computers Toshiba running Windows 7 and the other is Windows 10. Both are 64-bit. And it is Firefox 42.0.

  Type of topic: customization< enter > in the address bar.
  In the new window, look for the icon. When you find it, press and hold
  the left button on it and move it to where you want it to be.
  You can move the icons you want here, but
  some icons are locked in place.

  Also, there is a default button in the Middle at the bottom.

• Establishment of Firefox urging 42.0 refreshed and now my 2 - Fav went modules! Is reversal Possible to undo changes?

  In moments, Firefox "Refresh" made a mess of my selections, custom modules, plugins, toolbars, etc and now fails, 2 - my favorite "go - to" Add - ons are (1) went 1 and (2) the other will not be installed. I would NEVER suggest that Firefox again. I was doing pretty well... Except for several months, Firefox crashes suddenly, and I have to go in to effect Firefox Task Manager, then open Firefox anew. All I can say is, I have to lose my marbles to 'Refresh' Firefox for the second time in a few years, after the first sentence of time due, and the overall results are worse now, the second time. I'm also tired of Firefox crashes.

  Anyway, is the "refresh" which took place in the last hour, reversible? Also, just noticed "old Firefox Data folder ' then he'd ever seen before... is - it related to Firefox refreshing?

  Help?

  Yes, an update moves the entire record of the settings in the folder of old data from Firefox, then Firefox creates a new folder of parameters with selected data in your old folder, not to mention most of the preferences or your extensions.

  You can use the contents of the Old Firefox Data folder to "roll back" the refresh, but this involves several steps. It takes 5 minutes, but it's perhaps faster than the recovery of individual files and load those into your new profile.

  Check in the folder 'Old data Firefox' update adds a folder with a random semi name on your desktop. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Exit Firefox completely and start up in the Profile Manager by pasting the following in the Windows search, or the Run dialog box by pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?