problem on the flow of tasks of adf and dynamic region

Similar Questions

• Set initial focus point in the middle of several models, the flow of tasks and fragments.

  Hi guys,.
  
  With the help of JDev 11.1.1.4.
  
  I've got the fragments of the page for which I would like to set the initial focus. The problem is that, often, these pages of .jsff are nested in page templates, model train, dynamic regions, etc. AFAIK, the original goal of a component is on the document. The trick is to find what all the prefixes are before the .jsff component.

  pt1:dynamicRegion:3:pt1:t1:0:it1

  Y at - it an easy way to understand all of the prefixes before that: it1, which can often be radically different?
  
  The easiest way would be to set the initial focus to say "defaultFocus" and have each .jsff has a component id called "defaultFocus? Feels like cheating, but any other way I can think seems much too complicated.
  
  Thank you
  Will be

  The method we use is mainly programmed by: Marianne Horsch.

  Once again, 1 page:

  In the body of this page is a dynamic region, that's all that is never updated.

  Bean, not all record deleted etc.:

    private static final String DEFAULT_COMMAND_ATTRIBUTE = "defaultCommand";
    private static final String INITIAL_FOCUS_ATTRIBUTE = "initialFocus";
  
    private String defaultCommand;
    private String initialFocus;
  
    public BolsysPageBean() {
      super();
      initPage();
    }
  
    public final void initPage() {
  
      List childrenList = getPageChildrenList();
      if (!childrenList.isEmpty()) {
        UIComponent defaultCommandComponent =
          UIComponentUtils.findComponentWithAttribute(childrenList, DEFAULT_COMMAND_ATTRIBUTE);
        if (defaultCommandComponent != null) {
          defaultCommand = defaultCommandComponent.getClientId(FacesContext.getCurrentInstance());
        }
        UIComponent initialFocusComponent =
          UIComponentUtils.findComponentWithAttribute(childrenList, INITIAL_FOCUS_ATTRIBUTE);
        if (initialFocusComponent != null) {
          initialFocus = initialFocusComponent.getClientId(FacesContext.getCurrentInstance());
        }
      }
    }
  
    private List getPageChildrenList() {
      UIViewRoot root = FacesContext.getCurrentInstance().getViewRoot();
      if (FacesContext.getCurrentInstance() != null && FacesContext.getCurrentInstance().getViewRoot() != null) {
        return UIComponentUtils.getAllChildComponents(root);
      }
      return Collections.emptyList();
    }
  
    public String getDefaultCommand() {
      return defaultCommand;
    }
  
    public String getInitialFocus() {
      return initialFocus;
    }
  

  Util code:

    public static List getAllChildComponents(UIComponent root) {
      List list = new ArrayList();
      if (root.getFacetCount() > 0) {
        Map facetMap = root.getFacets();
  
        for (Map.Entry entry : facetMap.entrySet()) {
          UIComponent facetComponent = entry.getValue();
          list.add(facetComponent);
          if (facetComponent.getChildCount() > 0 || facetComponent.getFacetCount() > 0) {
            list.addAll(getAllChildComponents(facetComponent));
          }
        }
      }
      list.addAll(getOwnChildren(root));
  
      return list;
    }
  
    private static List getOwnChildren(UIComponent root) {
      List list = new ArrayList();
      if (root.getChildCount() > 0) {
        for (UIComponent child : root.getChildren()) {
          list.add(child);
          if (child.getChildCount() > 0 || child.getFacetCount() > 0) {
            list.addAll(getAllChildComponents(child));
          }
        }
      }
      return list;
    }  
  

  Dynamic region is based on a bean of support as well.
  As I said before, when you want good use beans ():

  -Anton

• I lost the bar background tasks, start menu and help on my windows 7__

  I lost the bar background tasks, start menu and help on my windows 7

  Hello
   
  1. are you able to use the icons on the desktop with success?
  
  In addition to the suggestion of BurrWalnut you can see the methods below.
  
  Method 1.
  You may have set the taskbar to auto hide, check the settings below:
  a. Click Start and select Control Panel.
  now, (b) go to the menu bar of tasks and put in service and click on it.
  C. on the taskbar tab, check if there is a check mark next to auto-hide the taskbar.
  d. If there is remove it, then click on apply and then OK.
  
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts and check if the problem still persists.
  For more information, see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• Problems with the flow of the bank account

  Hello

  I subscriped CC 6 months ago. The flow of work of until last month. I received an email, that he had problems and I have to check my bank account of data.

  I do not understand what had happened, because nothing had changed since the last valid flow. The balance of my bank account was more than 'ok '.

  So what has past?

  Concerning

  Stefan

  Info support (via chat): there was a server problem to the cc-product flow assing in on behalf of adobe. Will be fixed soon.

• Problems with the form of task & Wacom?

  I'm new to Illustrator and I have a MacPro 2009 running OS 10.9.4 with Wacom driver 6.3.8 - 2 and when I go in the Blob brush controls, all menus popup to size etc only fixed and Random active and all other items are grayed. It's the same question weather I'm on CC or CC 2014. I tried to replace the file pref for CC 2014 and it made no difference. Is there a setting I'm missing?

  Thank you!

  Edit: Forgot to mention pen pressure option works fine in Photoshop CC 2014

  This is the latest driver for Wacom?

  Have you tried running the utility of Wacom and remove preferences?

• Problem of the El Capitan 10.11.4 and prompt orders/confirmation of the very slow connection wifi

  After that update to "El Capitan 10.11.4" my macbook pro is not able to connect to wifi public networks that invites for an acknowledgement of receipt/confirmation to the user.

  The login is also unbearably slow (about 5 minutes), but luckily, everything seems to work once connected. It seems that the wifi problem is related to the slow connection in what I saw the google wifi guest come up starbucks and disappear during the process of connection of five minutes of time (reboot wifi has not triggered the prompt after compulsive attempts).

  I read topics similar and tried the option presented by robertk1 in difficulty to El Capitan stuck during the connection , but still the same problem. I tried the signed two disconnected (e) icloud and make sure that there is no startup slow process daemon/agent.

  Here's my laptop specs: MacBook Pro (15-inch, mid-2014, retina), 2.8 GHz Intel Core i7, 16 GB 1600 MHz DDR3, Iris of Intel Pro.

  I am considering re-installing and getting ready for a backup. I am wondering anyone has recommendations about what else I can try as a last resort. It seems there should be a way to repair this.
  Below are some of the log entries which seem relevant for the processes taking the longest time.
  
  Thank you for any help, insight and tips,
  
  Enrique
  

  Here are the ongoing entries from 09:35-09:40... There is more input before connecting, but they seem irrelevant.

  22/03/16 9:35:40.103 PM UserEventAgent [270]: name of the event for flow/token could not do: com.apple.xpc.activity/24: 132: outdated data request

  22/03/16 9:35:40.183 PM cloudphotosd [295]: determine the start of the transition service: service = personId = com.apple.photo.icloud.cloudphoto * lastKnownPersonId = (null) targetState = 0

  22/03/16 9:35:40.183 PM cloudphotosd [295]: determine service transition end: currentState 2: 3, shouldEnableService: 0

  22/03/16 com.apple.photomoments [354 9:35:40.189 PM]: GEO: recovered Server geo rev version version configuration file: 9

  22/03/16 9:35:41.108 PM DCs [284]: error in __SOSUpdateKeyInterest_block_invoke_2 get the interests of the ring (null)

  22/03/16 9:35:41.121 PM CloudKeychainProxy [357]: __45-[UbiqitousKVSProxy doEnsurePeerRegistration] _block_invoke < UB - e - C > ensurePeerRegistration called, success ((null))

  22/03/16 9:35:41.124 PM DCs [284]: securityd_xpc_dictionary_handler IDSKeychainSynci [356] SetDeviceID error Domain = com.apple.security.sos.error Code = 1032 'no equal for me' UserInfo = {NSDescription = no equal for me}

  22/03/16 9:35:41.125 PM DCs [284]: securityd_xpc_dictionary_handler IDSKeychainSynci [356] SetDeviceID error Domain = com.apple.security.sos.error Code = 1032 'no equal for me' UserInfo = {NSDescription = no equal for me}

  22/03/16 9:35:42.943 PM configd [60]: network modified

  22/03/16 9:36:06.711 PM cfprefsd [146]: BUG in libdispatch: 15E65 - 1718 - 0x0

  22/03/16 9:36:08.832 lsd [276] PM: LaunchServices: currently 0 installed placeholders:)

  )

  22/03/16 9:36:37.584 PM logind [103]:-[SessionManager getClient:withRole:inAuditSession:]: 241: ERROR: no dictionary of session for the audit session 100018

  22/03/16 9:36:37.584 PM logind [103]: _SMGetSessionAgent:73: ERROR: failure of __SMGetClientForAuditSessionAgent 2

  22/03/16 9:36:37.584 PM IMRemoteURLConnectionAgent [363]: SACShieldWindowShowing:925: ERROR: NULL response

  22/03/16 9:37:08.528 PM apsd [84]: attempt to push wake subjects without dark wake active:)

  22/03/16 9:37:08.530 PM apsd [84]: attempt to push wake subjects without dark wake active:)

  22/03/16 9:37:08.531 PM apsd [84]: attempt to push wake subjects without dark wake active:)

  22/03/16 9:37:08.533 PM apsd [84]: attempt to push wake subjects without dark wake active:)

  22/03/16 9:37:08.546 PM apsd [84]: attempt to push wake subjects without dark wake active:)

  22/03/16 9:37:08.546 PM mapspushd [365]: [warning] Services all gone, delete all accounts

  22/03/16 9:37:08.547 PM mapspushd [365]: [warning] Services all disappeared, removing all activated accounts

  22/03/16 9:37:08.547 PM mapspushd [365]: [warning] Services all disappeared, removing all dependent features

  22/03/16 9:37:08.561 PM askpermissiond [369]: StoreTransport: reset connection by using production environment name APS

  22/03/16 9:37:25.346 PM corecaptured [208]: CCProfileMonitor::freeResources done

  22/03/16 9:37:25.346 PM corecaptured [208]: XPC error: invalid connection

  22/03/16 9:37:25.346 PM corecaptured [208]: CCDataTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: AssociationEventHistory

  22/03/16 9:37:25.347 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: OneStats

  22/03/16 9:37:25.348 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: IO80211AWDLPeerManager

  22/03/16 9:37:25.349 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.driver.AirPort.Brcm4360.0, name: DriverLogs

  22/03/16 9:37:25.349 PM corecaptured [208]: CCDataTap::profileRemoved, owner: com.apple.driver.AirPort.Brcm4360.0, name: StateSnapshots

  22/03/16 9:40:49.934 PM loginwindow [102]: ERROR | -[ApplicationManager handleCASEvent:withData:] | SetupAssistantSpringboard exit by user zero stateful session: 171, continuing connection

  22/03/16 9:40:49.934 PM loginwindow [102]: ERROR | -[LoginTransition setDarkInstallShieldEnabled:] | Attempt to shoot dark install shield when he was not a

  22/03/16 9:40:50.045 PM WindowServer [178]: * DMPROXY * (2) found "/ System/Library/CoreServices/DMProxy. Run with arg = - login

  22/03/16 9:40:50.050 PM WindowServer [178]: * DMPROXY * (2) found "/ System/Library/CoreServices/DMProxy. Run with arg = - AMBDprefs

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Problem with the Cisco ASA 5525 X SFR and Firesight high school

  Hi team,

  We have two ASA 5525 X installed on them and Firesight in a Linux VM whose two SFRs are registered with SFR failover mode. We use the SAA secondary off the hook if the primary fails to turn on the secondary manually switch the wan cable. I turn on the ASA secondary every weekend to take the configuration of the primary for the ASA and the SFR and close by button walk / stop.

  Last week I turn on high school ASA and the Firesight couldn't see the secondary SFR and show the message below:

  Module device heartbeat: device > don't send heartbeats.

  (I should mention I can Pinger the IP ADDRESS)

  I tried to study the problem without success.

  I also deleted the sensor just Firesight devices management in case something is stuck, and I'm trying to re added without success.

  I'm new in firepower so... any ideas?

  Thank you

  Finally, this problem has been resolved by the redefinition of firepower:

  see detailed here procedure to perform this redefinition;

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  Before that, it appeared that firepower was not very healthy:

  After a success "" configure Manager add xxxxx"command.

  the command of managers show show nothing;

  He should have shown this result:

  > Display managers
  Host: 193.193.2.75
  Registration key: AZERTY
  Inscription: pending
  State of the PRC:

  on the other hand, in expert mode, the following command shows several processes (and not in the normal state):

  sudo pmtool status | grep-i down

  Last point,

  After the recreation and reconfigure all this fire power, installed in the ASA secondary standby, was considered to be OK under Firesight health Monitor,.

  but after 10mins, it appeared in critical condition with the following message:

  "Interface"DataPlaneInterface0"receives not all packages.

  This is normal and due to the fact that Eve ASA receives no flow and the same goes for firepower inside this ASA;

  by performing a failover from the primary to the secondary ASA, this critical message disappeared for firepower inside the ASA Sec and appeared for firepower inside the ASA elementary school

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• D7260: two problems at the same time - started paper jams and ink intermittent problems

  First of all, let me say that the printer is out of warranty.

  Paper jams – there is nothing inside the printer. Looking at the back of the printer there is a point inches long finger inside the printer (far left) plastic just above the document that grabs the paper and photo paper.  Each paper and photo paper that goes through the printer grabs on this extension and ends with a truncated top left corner after printing.

  Intermittent problem of ink - sometimes magenta will not print, sometimes black doesn't print, sometimes, they all will be printed.

  I am ready to throw this printer out, but before I I want to take it apart.  I want to take the cover off, but there seems to be no easy way to do it.  Can someone tell me how to remove the cover?  There seems to be two screws at the back of the printer that needs a tool small, hexagonal, but there also seem to be some pins plastic all around the bottom which can have simultaneous "pressing" need to release the tabs.

  Any ideas? Don't forget, I am ready to throw this clipboard outside, but I don't want to take a "sledgehammer" to take it apart.

  It did not work.  Paper/transport jams now.  Magenta ink still does not print. This printer is worthless.  I get an Epson printer for photos. This printer D7260's official "junk" now and will be thrown...

• The flow of work, Servlet, popup and a managed Bean validation

  Hello
  
  We try to display a PDF file in a pop-up window by calling a Servlet in a JSF page using a workflow in JDeveloper 11 g R2.
  
  The relevant part of JSF:
  

  <af:inlineFrame id="if1" shortDesc="Report" source="/pdfservlet" styleClass="AFStretchWidth"></af:inlineFrame>

  The /pdfservlet points to a Servlet with a method doGet as follows:
  

  protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
    response.reset();
    
    OutputStream out = response.getOutputStream();
  
    FacesContext context = this.getFacesContext(request, response);
    OracleReportBean bean =
      context.getApplication().evaluateExpressionGet(context, "#{reportBean}", OracleReportBean.class);
  
    bean.run(context, out);
    removeFacesContext();
  
    out.close();
  }

  The Servlet is trying to get the FacesContext, but we met with the following exception:
  

  Caused By: javax.faces.FacesException: Cant instantiate class: oracle.adfinternal.view.faces.component.AdfViewRoot.

  We have removed the following lines to the getFacesContext() method:
  

  UIViewRoot view = facesContext.getApplication().getViewHandler().createView(facesContext, "");
  facesContext.setViewRoot(view);

  This avoids the exception above, however... We try to get the settings of the form that was submitted. Here is an example of the form element:
  

  <h:inputHidden value="MyMedicationList_Report" id="system_REPORT_RESOURCE"/>

  When the Servlet calls the Bean managed to retrieve the value, it uses:
  

  Map<String, String[]> requestParameters = getRequestParameters();
  Parameters p = getParameters();
  
  for( String key : requestParameters.keySet() ) {
    for( String value : requestParameters.get( key ) ) {
      int i = key.indexOf( ':' );
  
      if( i >= 0 ) {
        key = key.substring( i + 1 );
      }
  
      p.put( key, value );
    }
  }

  Where getRequestParameters() tries to get the external context to retrieve the map of query parameter values:
  

  return getExternalContext().getRequestParameterValuesMap();

  The card is empty.
  
  I tried after http://www.oracle.com/technetwork/developer-tools/adf/learnmore/oct2010-otn-harvest-183714.pdf by assigning the web.xml file:
  

    <!-- JspFilter must be configured before adfBindings. -->
    <filter-mapping>
      <filter-name>JpsFilter</filter-name>
      <servlet-name>PDFServlet</servlet-name>
      <dispatcher>FORWARD</dispatcher>
      <dispatcher>INCLUDE</dispatcher>
      <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
      <filter-name>adfBindings</filter-name>
      <servlet-name>PDFServlet</servlet-name>
      <dispatcher>FORWARD</dispatcher>
      <dispatcher>REQUEST</dispatcher>
    </filter-mapping>

  And set the data bindings on:
  

    <pageMap>
      <page path="/pdfservlet" usageId="ca_bcpra_promis_reporting_view_PDFServletPageDef"/>
    </pageMap>
    <pageDefinitionUsages>
      <page id="ca_bcpra_promis_reporting_view_PDFServletPageDef" path="ca.bcpra.promis.reporting.view.PDFServletPageDef"/>
    </pageDefinitionUsages>

  The Servlet is running, called the managed bean instantiated, but cannot read the query parameters.
  
  Is the button used to start the workflow in a dialog box:
  

  <af:commandButton text="Run Report" id="submitReport" useWindow="true"
                    windowEmbedStyle="inlineDocument" windowModalityType="applicationModal" windowHeight="500"
                    windowWidth="700" action="runReport"/>

  By using a workflow, the user input are validated before the opening of the pop-up window. We want to keep this behavior. The PDF file opens and then returned with a NullPointerException:
  
  http://pastebin.com/raw.php?i=PaM64jL4
  
  The Servlet, through the managed bean, made a request to the report server to pass parameters and generate a PDF file. The PDF is sent to the browser via the Servlet.
  
  What other steps can we take to:
  
  1. send user and system parameters.
  2. generate a PDF file on a remote server.
  3 distribute the PDF file to the user in a pop-up window.
  
  Thank you.

  Here you go
  https://www.EverNote.com/shard/S48//sh/ae8f58be-c4d3-4AB9-8F94-3e01d0e967d0/923ab115aca22fd1e2fccbf6321cbf09

  Timo

• First try the producer consumer Architecture: continuous play and dynamically update settings.

  Hello

  I am currently working with two instruments; an Agilent E3646A and a NI 6212 BNC. My goal is to have the 6212 continuously take measures according to predefined parameters while the E3646A parameters can be continuously updated. This combination simple instrument aims to help me learn the manual architecture; continuous measurement, output dynamic controls and instruments more will be added in the future.

  I've already posted on a similar, but more complicated configuration (http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Split-second-lag-when-controlling-two-instrum... and was advised to try the producer consumer Architecture.) I found the documentation on the website (http://www.ni.com/white-paper/3023/en/, https://decibel.ni.com/content/docs/DOC-2431), searched the forums and built my own VI. While my first attempt at a producer consumer Architecture has solved some of the problems I had when I posted on the subject, however, new questions have been raised regarding the reading and adoption of the VI.

  I am currently able to run the VI and update the settings on the device. Previously, I'd get a freeze while the instrument has been updated and could not switch settings until it was done. This has been resolved, although that reading updates only when a parameter has been updated, although it is outside the structure of the event. In addition, the Stop button does not in any context. I also got occasional mistakes on the part of Deqeue, but the major part of the sentence is error-200279 'A tried to read samples that are no longer available' to DAQmx Read. I realize that there is a problem in my loop of producer but have not been able to find a way to solve it.

  This is my first attempt at a producer consumer Architecture and already I can see that it is a powerful tool. I read as much as I could and looked at examples, but should have some problems at the beginning. Would be very grateful of any advice so I can take full advantage of the architecture.

  Hope to hear from you,

  Yusif Nurizade

  You're going to overflow this buffer, unless the events are generated faster than "sample rate/number of samples.   Period.  Nothing could be simpler.

  You don't need a local to stop your curls.

  Try something like this attachment.  I simply moved the structure of the event in its own loop dedicated since it had nothing to do with acquiring data at all.

  Data acquisition loop stops very well when you destroy the task and destrying the stops of power queue (sending the default values of the queue for the power control) for EXAMPLE, to ADD a group of setting 'Safe shutdown' to a 'package' and it wire to the Center terminal (Prototype).

• Problem with the text transform task

  Hello
  
  I use SVM categorization on text in the 11.1 database data, using mostly Java APIs.
  The problem is with the text transformation.
  
  I would like to use the same name for the task in each program call, for example: TASK_XFORM_TXT
  
  When I run the task with this name for the first time, text column is divided very well in nested tables.
  But after that, when I add a record to the table and call the same task with the same name, new text values are not in the nested table.
  
  For example:
  
  I have a table with two columns: CASE_ID, DESC and two rows:
  1, CAPACITOR 100NF CERAMIC
  2, SMBJ40CA LOOK SMD DIODE
  
  After executing the task first nested table contains
  1, (CERAMIC, CAPACITOR 100NF)
  2, (SMBJ40CA, LOOK, DIODE, SMD)
  
  Then I create the new table with the same columns and three rows:
  1, CAPACITOR 100NF CERAMIC
  2, SMBJ40CA LOOK SMD DIODE
  3, RESISTANCE 100NF CERAMIC FILM
  
  After performing the same task with the same name, the first two lines have exactly the same values as in the previous call, but a third looks like this:
  3, (CERAMIC, 100NF)
  
  If the words: RESISTANCE and FILM disappears. Two of them were not on a line any during the first call of task.
  
  
  I would like to know if it should work like that?
  Should I use new task names when new values appear in the training data?
  
  I save the task of transformation to each program call.
  I also tried to delete the task with this name, but the "doesObjectExist" connection object function call data mining, always returns false
  removeObject call causes error: javax.datamining.ObjectNotFoundException: TASK_XFORM_TXT task not found.
  
  I found that for each task text it is created the table in the schema user dm. For example, for TASK_XFORM_TXT, there is a table: DM$ F0TASK_XFORM_TXT.
  When I let go, transformation works very well for the next time.
  
  Thanks a lot for your help and your time
  Pawel
  
  Published by: pawel.fidelus on 2010-05-21 10:29

  It seems that there is a bug in JDM.
  You can use Oracle DataMiner
  go to the http://www.oracle.com/technology/software/index.html and search for "Data Miner"

  We checked that it produces the correct results.
  Thank you

• Stop the flow of task by program activity

  Hi all
  
  I use 11 GR 1 material ADF Faces
  
  I made a method I call whenever an exception is thrown in the controlled beans. It is a way to show all runtime exceptions in a dialog without forwarding to a default error page. I use FacesMessages to show the errors of the dialog box.
  
  But I have a problem/question. If I press a button with ActionListener and Action, and an exception is thrown in the method executed by the ActionListener, how can I do to stop the implementation of the Action? This is because the popup informing them that an error has been produced, is raised me in the next page, called by the Action.
  
  Here is the code:
  
  1. press on a button that executes this method raised a NullPointerException:
  
  * public void doNullPoiner3 (ActionEvent actionEvent) {*}
  try {}
  System.out.println ("put a message with id");
  String s = null;
  System.out.println (s.Substring (0));
  } catch (Throwable e) {}
  CustomExceptionHandler.reportTechnicalException (th, "it1");
  }
  *}*
  
  2. the code of reportTechnicalException()
  
  * public static void reportTechnicalException (Throwable th String idField) {*}
  
  retry the custom messages (overview and detail)
  ...
  Show the error
  addFacesErrorMessage (summary, detail, idField, FacesMessage.SEVERITY_ERROR);
  
  *}*
  
  * private static void addFacesErrorMessage (String summary, String msg, String stId, gravity javax.faces.application.FacesMessage.Severity) {*}
  
  FacesContext ctx = getFacesContext();
  
  FacesMessage fm = new FacesMessage (severity, summary, msg);
  String stViewComponentId = (stId! = null & & findComponent (stId))? stId:null;
  
  ctx.addMessage (stViewComponentId, fm);
  
  *}*
  
  Please, can you help me? I only want to stop the execution of the workflow if it exists.
  
  Thank you in advance,
  XAVI.

  Hello

  Having the action listener throw an AbortProcessingException. This is an exception of reserved JSF that prevent the propagation of the event without killing the application.

  ~ Simon

• a problem with the bar of tasks-windows7 premium

  I have Windows 7 preimum and something happened the aero by workin is no longer my taskbar looks like the classic theme... and I have no choice to change topics, please help!

  It's really annonyin me...

  Hello

  Try the Aero Troubleshooter to determine what the problem is.
  Open the Aero Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, click Troubleshooting, and then, under appearance and personalization, click Display Aero desktop effects.
  See also:
  Guided Help: the problems of Aero in Windows 7

  http://support.Microsoft.com/kb/976170