Problem on the Qosmio F50 - 10Z card reader

Similar Questions

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them

• Boot from the disk ESATA on the Qosmio F50 - 10Z

  Hello

  is it possible to boot from an external drive using the ESATA port?
  I have BIOS 1.60 installed but I don't see an option for ESATA?

  What a USB? Laptop is a Qosmio F50 - 10Z

  Thank you

  I think that it of not possible to start from eSATA. The BIOS should provide this type of functionality.
  I've never tried, but I think that's not possible.

  As far as I know, it must be possible to boot from a USB device.
  The BIOS does not support this then try it.

• Problem with the built-in SD card reader.

  Hello

  After many hours of searching through previous post, I am still unable to get my card reader built-in to read.  It worked fine for a while, and then all of a sudden it stopped.  I tried everything, different micro sd adapter mirco sd cards and also read the posts here.  So why I am now posting looking for any help there.

  Thank you.

  Ulster 03.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• On the problem of the Satellite A110-275 card reader

  Hey

  Ive had a bit of trouble with my card on my A110-275 reader. Whenever I put an SD card, the light flashes to say he recognizes her, but no matter what I can't seem to load.

  I know that's not the card because my father has a similar laptop and I have no problem whatsoever with his.

  I was wondering if it could be the drivers? Anyone got any info on the place where to download?

  [Thanks:]

  Hello

  Satellite A110 is old enough laptop model. Since when did you notice this problem with an SD card? Have you tested with different SD cards (different capacities)?

• On the Qosmio F50 of blue screen problem

  Hello world!

  Suddenly, I have a problem with my Qosmio F50. Frequently, it goes to the blue screen and says there is a problem with the hardware. I am running Vista and I havnt really brand new programs installed recently. I tried to write the code for the last time, it's happened, but has failed to catch the last didgits:

  STOP 0X0600008E 0CC0000005 (0X00000000, 0XA7F5IA9C...)

  Can someone help me please?

  Thank you.

  Hi blackgravy,

  At the present time it is difficult to tell why you get a blue screen it s often associated with drivers or RAM/HDD. First of all, you must follow the instructions posted by Akuma. Check your RAM with Memtest86. It s a freeware for RAM diagnostic tool where you can download an iso image to create a startup disk.

  To test the HARD drive, I can recommend similar Drive Fitness Test procedure such as Memtest86 with iso image and the bootable disc.

  Check this box!

• Qosmio F50 - graphics card may not be recognized under 64-bit Windows

  I installed the operating system Windows XP 64 on Toshiba Qosmio F50 - 10K. I have a big problem, because Windows XP does not recognize my graphics card (nvidia geforce 9600 m gt).
  I tried to install the drivers from the nvidia site, but once this graphics card still has not been recognized.
  It causes that, when I try to push and drag a window, I can see how it is re-paint.

  Could someone help me to solve my problem?

  Hello!

  I think that the problem cannot be solved. Toshiba doesn't support any laptop computer with Windows XP 64-bit because it is OS was not so popular.

  The only way I know is to use drivers from external Web sites and update your BIOS to the latest version. If it doesn't work, you must use another operating system.

  I think that the Qosmio F50 is really fast enough for Vista 64-bit. Try it and you will see too much work.

  Good bye

• Qosmio F50 - 10Z overheating - Cooler recommendations

  Hello

  My Qosmio F50 - 10Z Guard stops due to overheating. I think Toshiba then set up this kind of configuration would have kept this question in mind. in any case, I thought that the solution would be to get a notebook cooler, but the problem is that the Qosmio F50 fan on the far upper right side and most portable coolers have fans more near the Center. I would be grateful if someone could recommend a good portable cooler for this model (or any other solution to the problem of overheating).

  Thank you

  Rehan.

  Rehan salvation!

  I can understand you, but I have at this point, I must say that I have too many Qosmio F50. He models the F50-10B s and also has Core 2 Duo 2.26 GHz but it s quick model with GeForece 9700 M GTS (I know your model contains only 9600M).

  What can I say about this? Well, first of all, I love this laptop. I love the laptops with 15.4 screen so it s not not little and not wholesale. The design of the silver/black is absolutely nice with white lighting. Not the same boring design than on most other phones. All my games work well on this laptop.

  On the issue of cooling, Windows and Office, the laptop is very cool fan doesn t usually works. On my Qosmio laptop I m using two power modes:
  (1) profile of PowerSaver I use for Internet and office: here I defined the maximum processor at 75 State and as cooling method I put in battery. If I can put a lot of power and it s enough for Internet and office.
  (2) balanced: I use it for my games so I maximum cooling performance and the status of the maximum processor that I have set to 100%.

  Moreover, I clean my Qosmio laptop every 3-4 months using a jet of compressed air. This could blow out the dust from the cooling fans and so I don't have to disassemble the laptop. I think that's really good.
  Here, you can get more information about this topic: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  If you have any other questions, please let me know! :)

  Good bye

• Qosmio F50 - 10Z revolves around 80oc degress

  Hi guys,.

  Have a very little bit of trouble with my Qosmio F50 - 10Z, the GPU (9600M GT) revolves around 80 ^ o ^ c degrees when using, the system has been cleaned with air compress and is in perfect condition of the art, I use the laptop on a table computer as well to ensure air flow.

  Thank you very much.

  AFAIK Qosmio F50 is old enough laptop model and if you use every day on base maybe is time for cleaning professionals. Compress the air is OK but more of dust is just inside and cold air and cooling rack may be blocked by dust.

  I've seen repeatedly disassembled portable and it is raise what it looks like inside after two or three years of use. In my old notebook I found cat s hair.

  What is with cooling fan? It runs at maximum speed?

• Qosmio F50 - 10Z Bios Update crashed - how a cmos reset?

  I have a Qosmio F50 - 10Z and prompted by toshiba I downloaded the Bios Update and started to install.
  My screen saver came and it crashed.

  Not turn off (even after pressing the power button for 15 seconds).
  The drums and then put back. Computer skills on but the screen is blank and will not boot to the top.

  Tried to take part to Flash the bios by removing battery cmos/rtc (whatever it's called) but cannot find the battery and got to the point where I wasn't ready to dismantle any more (nobody else never disassembled a?)

  Could not find information or diagram or picture where the battery has been on the net... manual really useless laptop)

  Found reviews records of crisis, but I don't know what that means.

  So, how to I reset the bios?

  Please help - you're my only hope.

  > So, now, I find the cmos/rtc battery (if it's rechargeable explains so why does not easily localized) removed, he persevered on in a more accessible place - always reset BIOS

  Removing battery RTC would not help reset you mate sorry to the ROM BIOS module but what you did was completely useless
  It seems that the ROM modules where the BIOS is stored, was not properly flashed or something went wrong during the flash procedure

  In case of bad you the mobo is unfortunate but I think that Flash module ROM once more with a disc of crisis could help solve this case
  But the fact is that flashing the ROM module with a disc of crisis can be done by a technician of Toshiba ASP.
  That's why I recommend contacting the guys in your country and ask for flashing ROM

• Qosmio F50 - 10Z with windows XP

  Hi all

  I just bought an a Qosmio F50 - 10Z to run a CAD program, which does not work with Vista, unfortunately. I would like to keep Vista and add windows XP in a Setup to dual boot with Vista BootPro.

  Everything seems simple so far, but I am a novice to what follows. Apparently, after some research, I learned to integrate a XP disc with the necessary drivers. I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the toshiba site then it is not possible to install XP at all.

  Is this true?, or is there anything else we can do? The interest to buy the laptop was running the CAD program (which only works on XP).

  Any help is very appreciated.

  > I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the Toshiba site then it is not possible to install XP at all.

  That's nonsense!
  Of course, you will be able to install Win XP but the point is that a lot of portable devices does not work with Win XP due to unavailable drivers or tools

  The XP drivers are not available on the Toshiba driver page, but you can find it on other sites.

  For example;
  Sounds and driver LAN can be downloaded from the Realtek page.
  WLAN driver Intel page or here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Touchpad driver can be used other mobile computer series

• Microphone does not work - Qosmio F50 - 10Z

  Hello

  I have a laptop Qosmio F50 - 10Z.
  For the past two weeks, the internal microphone of my laptop stopped working.
  Its working fine but suddenly stopped working. However when I plug headphones to the microphone and speaker slots pins, it works.

  But without plugging the headphones, it won't work.
  Its really annoying me.

  Advice and assistance is appreciated. Thank you!!

  Have you checked all the settings of the recording device?
  Click on the volume symbol in the taskbar with the right button of the mouse and choose devices to record option.

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• When the Qosmio F50 come out?

  I waited for the new Qosmio F50 for ages - all Toshiba information seemed to indicate he should be out, but it is impossible to find anywhere - and cannot all other info!

  The X 300 (who appeared in all the ads to launch the F50 and G50) now seems to be available.
  But there is now news, no reviews or anything on the F50.

  Everyone has heard about why it was delayed, or when it may be available (I'm in England)?

  Thanks in advance!

  Hello

  Already, the Qosmio F50 turned out!
  For example, the Qosmio F50 - 10 M was released on the German market.

  The Qosmio, Qosmio F50 - 10Z PQF55E-01J026EN there are already on the British market.

  Maybe you should Xbox a bit.

  See you soon

• How to configure the buttons on the Qosmio F50 - 12J LED?

  I've recently upgraded to Vista with Windows 7 Ultimate edition. I downloaded the drivers of value added package and it seems to work, but I can not configure some of the buttons because when I press the LED button and the support of key Toshiba starts there is not some options for the buttons that were there in Windows Vista...

  Is there a way I could add the same button options I had with Windows Vista?
  My laptop is the Qosmio F50 - 12J and I use Windows 7 Ultimate 64 bit.

  You installed a driver of Flashcard support? You can download it from:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp