Lenovo T400s problems after cleaning

Similar Questions

• I have problem after cleaning LCD on my SP U200

  Hello

  I have the following problem with my U200. I regularly clean my monitor with LCD cleaner foam. But due to some reason, the foam has penetrated the monitor, seems to be between the trubrit and LCD. Because of the experience, I think that it wasn't my fault.

  For me is the sealing between the trubright and LCD that have the problem. Now, the monitor has some dirt that is to say that the froth evaporates.
  The guys at Toshiba insist it's my fault.
  Anyone before this show with its monitor? What has been your Toshiba service center approach?

  Best regards
  Pantelis

  Hello Pantelis

  Please don't be crazy on me, but I believe also that it is your fault and you can't call for replacement of view covered by the warranty. I cleaned the LCDs much over the past 7 years and I never noticed anything like that. I really can't imagine how much liquid you used to clean the LCD screen.

  It must be done very carefully and the liquid should be administered as necessary. Sorry, but I see no solution here. Maybe the LCD disassembly and cleaning can help. Try to talk to the technicians.

• Problem with laptop Lenovo T400 video controller

  Hello

  I have problems with the video controller on my laptop of Lenovo T400.

  Brand new and installed with Windows XP factory.

  He maintains and prompt to install the drivers for the video controller.

  I tried to use the CD and downloaded the chipset and video drivers Lenovo Web site, but the problem persists.

  Anyone encountered before?

  Thank you and best regards

  Solo

  option 3.

  Discreet GPU = ATI GPU
  Integrated GPU = Intel GPU
  Switchable graphics = Intel or ATI switchable by Vista and Win 7 OS Thinkvantage Power Manager.

• HD T410s graphic problem after update

  A few days ago, I decided to update my 2011 T410s by Lenovo
  Toolbox. I was looking for solutions to improve the battery life. I have
  has chosen to update all 'important' and some option updates
  those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

  Since I have lived a graphic break several times when I watch videos online such as
  thedailyshow.com or youtube.com. The first time a
  a message on the graphics driver (or something like that)
  has stopped working and has been restored but the next second the
  ventilation was repeated, monitor would go black and the
  graphics would begin slowly reappear, I'd still get a message
  on the graphics driver and the other second monitor would again
  black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
  the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

  Suggestions? Is someone else had problems after updating?

  Please uninstall the display driver, and reinstall.

  Also, install the latest player adobe flash.

  Please watch the video file online and then check it in.

  Best regards

  Tanuj

• Windows update fails to Downlaod after clean install

  Hello

  Im having problem installing windows update after clean install (although it happned to me after GHOST as well)
  On my new computer, I have 2 updates of isnatll 1:
  (1) Windows Genuine Advantage Validation Tool (KB892130)
  (2) update for Windows XP (KB898461)

  When I try to install them by using "Windows Update" or "Microsoft update" I get the following error code: Error Code: 0 x 80246002

  someone meet souch problem?
  When google for a solution based on this error code I found nothing.

  Thank you very much for your help,
  see you soon

  What were the problems you saw that you thought a "clean install" of Windows XP could solve?

  This "clean install" included formatting the HARD drive?

  The "clean install" left you with WinXP WinXP SP1, WinXP SP2 or WinXP SP3 gold (no Service Pack)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you did the clean install)?

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958056

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer laptop Lenovo T400 (with XP) can't read some DVDs (for example ToyStory3)

  I have a Lenovo T400 (with XP as an operating system). I just rent a DVD ToyStory3 of Redbox. My laptop can not recognize DVD (dvd turned and continues to try to read, but it never succeeded). I put the DVD in another laptop (Dell Inspiron 15, with a Windows 7 operating system), and it works very well. I never had any problem to play a DVD on the Lenovo T400 (and he can still play DVDs like cars). Any suggestions?

  Hi Yen 7008,

  1 run the fix it from the link below and check off the results: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems

  2. you can also check out the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• E4200 Intel 5300 on Lenovo T400 does not connect to N 2.4 ghz or 5 GHz

  I searched the problem as well I can I

  to not eval, I can't have the Intel 5300 on a Lenovo T400 to connect to N or Radio

  I tried every combination possible parameter on the E4200

  and on the 5300

  That was a lot of combinations

  I can't get a G-connection on 2.45 ghz and only one on the 5 GHz range

  To make things worse, try to call Lenovo is useless without a warranty

  they wont even answer simple questions without it, crazy!

  Have you disabled WMM on the E4200? If you have, then no card Intel and many will fail to connect to any frequency N. For 5 GHz specification requires it to be enabled, but don't really care about many adapters, unfortunately the Intel cards and fail to connect.

• Time for the touchpad Lenovo U400 problem

  I also have this problem: after you type something (using the keyboard, of course) and move the cursor with the trackpad, I noticed a huge backlog. As I type no matter what letter and then try to move the cursor. There is a delay of about half a second. Very sensitive and caring, as it won´t allows me to play my favorite games.

  Note of the moderator; subject edited to better reflect the content

  Hi again,

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/touchpad-response-delay-solved/TD-p/3779...

  Try this link, it may be useful

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• I can't activate Windows 7 after cleaning installed.

  Activation of Windows 7 (upgrade) after clean reinstall

  Hi guys,.

  I have the problem with the Windows 7 upgrade version. I was with WIn 7 months with no problems. Win7 was installed on windows Vista in my case.
  But a few days ago, I decided to do a clean reinstall (from scratch, formatted HARD drive).

  The installation was funny until I got the error message telling me that my key is not for the clean install and I can't activate the system. I just left the empty key field and open windows.

  I thought that I activate the system in 'normal' mode not during the installation. So I now fully installed Windows 7 and I can't activate it - because the installation was made not M$ ' mroper way "." Very funny so the "right way" is to install windows Vista and upgrade to windows 7?

  The system has been enabled on this PC (the same harware 100%) before, so I can't do this again? I can not show same Vista installation CD, etc. installation key?

  Is there another way to activate it?

  Thank you

  Maciej

  I just followed the link information: http://www.sevenforums.com/tutorials/31402-clean-install-upgrade-windows-7-version.html option 3 was useful for me.
  Thnaks again for help

• Problems after updating to Windows 8

  I had some problems with my new laptop so I decided to try the «Refresh your PC» function Doing so brought on a slew of new problems which I had no chance to solve on my own. I hope someone knows what to do with this mess.

  After "refreshing" to my PC, my laptop wouldn't let me:
  Install anything (downloads are OK, though)
  Programs open (with the exception of Internet Explorer)
  Applications open
  Open C: /.
  Open the laptop settings
  Solve problems ("an error has occurred during troubleshooting.")

  It became obvious to me that the majority of these problems were because the updating of Windows me rid of my administrative privileges.

  I tried to solve this problem with every idea that I had and every suggestion I could find online. The problem is that my phone won't allow me to do anything to capture administrative privileges.

  Here are the solutions I tried:
  'Change the Type of account' in the user accounts: parameters show that I am already administrator.  The 'Standard' option is greyed out. Nothing to do here.

  Using a command prompt: everything I try, I get the "Network Error" result... "Windows cannot access to ' if I get" net user administrator / Active: Yes "I received the reply"the system 5 error has occurred. Access is denied. "I can only assume this error occurs because I'm not an administrator. If I try to do "sfc/scannow" it says "You must be an administrator." However it won't let me run cmd as administrator.

  Exchange User Account Control: the bar is set on "notify me only when...". ». I can drag down to "Never notify", but when I try to click on 'OK' will not just pass by. I could click OK all day and nothing will happen. No error message.
  Create a new user: hit this button head to PC settings, which does not, as previously stated.
  Clean boot: Msconfig will not open, I get the error message "network error". Windows cannot access.
  Switch to the Microsoft account: 'Users' directs 'PC settings", which is an application that does not open.
  CHKDSK: whatever it is, I have no idea, but it does not open.

  If I try to "Run as Administrator" on any program, it simply doesn't. No error message.

  I reached the end of my rope after trying several solutions more that hasn't worked and tried to do a system restore. System Restore does not open. I get the error message "System Restore could not start." I would try to solve the problems, but as I said troubleshooting will not, work almost everything also, runs to the PC settings application, which does not open.

  None of these problems existed before I did the update of Windows, so I can only assume what caused their - which is a little disconcerting.

  Any ideas on what to do?

  I had this problem after that refreshing of my pc, if yours is the same (if it could even be your best solution) you will need to make a new account

  Windows + x

  go to "Control Panel".

  go to "user accounts and family safety."

  Press 'user account '.

  Press 'manage other accounts '.

  In light blue shades near the bottom, it says "add a new user".

  Follow all instructions after that to make your new account

  Sorry I couldn't be more helpful. If all else fails, it's the only way I know how to deal with it

  E-mail address is removed from the privacy *.

• pen problem after a reboot mode X200t slate

  I had following problem: after Windows restarts using the slate, I always get the pen doesn't work does not correctly, it's always in the upper left corner of the screnn, every time I touch the screen.

  TouchPoint works well.

  The only solution is to reboot the Dual Wacom Penabled Touch in Manager (stop and start again). This isn't comfortalble, cause, you need one-slate, restart and put the Tablet slate.

  All the drivers are updated to the latest versions.

  I have Win7 32 bit

  C.

  RESOLVED:

  Edition Enhanced Multitouch Driver (last version 7.0.2.19)

  Instal Driver Multitouch (latest version 3.0.0.3)

  BTW, it's a shame for Lenovo list drive more Multitouch for X200T, which does NOT work properly

  C.

• Huge problems after updateing to 31.1.2

  Hello

  I encountered several problems after the update to 31.1.2.

  1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

  The message send failed.
  The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

  I have control over the mail server and reflected on the Messaging log and it said:

  2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

  When I try to send mail.

  2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

  3. all my entries in the missing calendar which is a very big problem for me.

  Best regards

  Andrija

  Close Thunderbird and go to your profile folder.
  There is a subfolder "extensions".
  Find the folder for both the lightning and Enigmail under "extensions" and delete them.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?