Problem starting DSM SA connection Service

Similar Questions

• Empty Connections window network and could not start the network connections service

  Problems with Verizon router and during diagnosis discovered that the network connections window is empty (found by clicking on change settings for the network and sharing Center map).  We are currently connected to the Internet with the new router and Ethernet cable, but the cannot connect wireless (what we could do before) - apparently not to display icons in N.C. window is not necessary to have connections.  Found a reference to the network connections service and check it is running as a solution to the window being blank.  The service is not running, and when I try to launch it I get "Error 1083: the executable program that this service is configured to run in does not implement this service."

  I've seen a lot of suggestions on fixes for the problem of the empty window.  I did the sfc /scannnow and found no problem.  I tried to update the network adapter driver, but it was very good.  None of the solutions seemed appropriate perfectly adapted to this situation.  Is this really a problem?  Any suggestions on what to do about it?  We are about to use an USB adapter until our connection speed and I want to make sure that everything works first.  Thanks for any help.

  Hi EWright1, we will check the settings of the service.

  Click Start, type CMD. EXE and press {ENTER}

  Type the following command and press ENTER:

  REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  Copy the output and post with your response.

  Ramesh,

  Thanks for the suggestion. The output of the query to register below.

  C:\Users\Edward > REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman
  DisplayName REG_SZ network connections
  ImagePath REG_EXPAND_SZ %SystemRoot%\System32\svchost.exe - k netsvcs
  Description REG_SZ objects manages in the network and remote access connections folder, in which you can view the network local and remote connection
  .
  ObjectName REG_SZ LocalSystem
  ErrorControl REG_DWORD 0x1
  Start REG_DWORD 0x3
  Type REG_DWORD 0 x 120
  RpcSs DependOnService REG_MULTI_SZ
  ServiceSidType REG_DWORD 0x1
  REG_MULTI_SZ RequiredPrivileges SeImpersonatePrivilege\0SeChangeNotifyPrivilege\0SeLoadDriverPrivilege
  FailureActions REG_BINARY 8051010000000000000000000300000014000000010000006400000001000000640000000000000000000000

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Enum
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Parameters

  Hi EWright1,
  Follow the steps listed under "Reset Network Connections Service registry keys" in this URL:
  Difficulty for Service (Netman) 1083 in Windows 7 network connections error:

  http://www.Winhelponline.com/blog/fix-for-network-connections-service-NetMan-Error-1083-in-Windows-7/

• Urgent: Could not start the Web analysis services

  Hello Experts,
  
  I have problems starting the Web Analysis Services. Not able to start the Web analysis services
  
  from weblogic with the Java version:
  version Java '1.5.0.07 '.
  Java (TM) 2 Runtime Environment, Standard Edition (build 1.5.0.07 - _20_mar_2007_05_31)
  Java hotspot Server VM (build 1.5.0.07 mixed jinteg:03.20.07 - 11:05 IA64, mode)
  WLS starting with line:
  /opt/java1.5/bin/Java-serveur-Xms256m-Xmx512m - XX : MaxPermSize = 128m-Dhyperion.home=/hyphome/Hyperion-DESS_ES_HOME = / hyphome/Hyperion/BIPlus/appsinfo/WebAnalysis/EssbaseJAPI - Datf.session.binding.kill-avec-préjudice = vrai-Dweblogic.j2ee.application.tmpDir=/var/tmp/hyperion-Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0-da-Dplatform.home=/hyphome/bea/weblogic91-Dwls.home=/hyphome/bea/weblogic91/server-Dwli.home=/hyphome/bea/weblogic91/integration-Dweblogic.management.discover=false-Dweblogic.management.server= http://localhost : 7001 - Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=/hyphome/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath-Dweblogic.Name=WebAnalysis-Djava.security.policy=/hyphome/bea/weblogic91/server/lib/ WebLogic.Policy weblogic. Server
  < 6 January 2010 12:28:36 IST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with the Version of machine virtual Java hotspot Server 1.5.0.07 jinteg:03.20.07 - 11:05 IA64 Hewlett - Packard Company >
  < 6 January 2010 12:28:37 IST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason:
  
  There are 1 nested errors:
  
  weblogic.management.ManagementException: cannot get a lock on hyphome/Hyperion/deployments/WebLogic9/./servers/WebAnalysis/tmp/WebAnalysis.lok. Server may already be running
  at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
  at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:59)
  at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:82)
  at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:365)
  at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:116)
  at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
  at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
  at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
  in weblogic. Server.main (Server.Java:67)
  
  >
  < 6 January 2010 12:28:37 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
  < 6 January 2010 12:28:37 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
  < 6 January 2010 12:28:37 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  
  Any suggestions would be a great help. Thanks in advance.
  
  Kind regards
  Sudhir
  
  Edited by: 637223 January 6, 2010 13:54

  Are you sure there's not another web analytics web application processes running, have you checked the processes running on the machine, you will need to kill or stop one of them to release the lock.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

  always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

  My OS: windows xp sp3 and I use Dell Vostro1520

  original title: wireless connection problem

  I GOT THE SOLUTION OF MY PROBLEM:

  1. right-click on my wireless connection click on -> status
  2. in the window on the general tab, I click on the -> properties button
  3. in the open window in the general tab I click the button -> Configure...
  4. in the open window, I go to the tab Advanced to->
  5. in the ->property: box, I select the element -> WZC managed Ethernet
  6. in the box -> value I selects the item -> Enabled
  7. I click the button OK to-> .

  NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• problems with the connectivity services and ePrint 310a

  I just got a HP 310a as a replacement for what said HP was a 210 a defective. The 210 a would not stay connected to my network and support HP gives up and sent me a gift card to buy a replacement.

  I've set up the replacement. He also had the problem of connectivity but other features wireless everything has worked well. I could print by e-mail to a dedicated e-mail address and printing via my ipod using HP iprint app.

  While he was trying to use the previous suggestions of support to solve the problem of connectivity, the printer now has lost its ability to connect to web services and I can't activate the features of eprint. "" When I try to connect to web services, I get an error message indicating that "web server problem" "problem connecting to the web server.

  I set up the printer with a manual address and that is where the problem started.

  Please, any suggestions how to get this resolved.

  Here's what I recommend:

  1 set a static IP address, but make sure that it is outside the range of your router's DHCP.  If your router uses the range (.2 a.254, reduce the a.2 a.200 beach or something and then assign the printer apart from this, comme.220.)

  2 the gateway address goes into the field of the bridge and the first DNS entry.  Do not fill in the second.  The IP Address of the gateway usually ends par.1

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why start having internet connection problems when I watch a lot of videos in windows vista?

  Why start having internet connection problems when I watch a lot of videos in windows vista?

  Bandwidth saturation, perhaps?

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem: Deployment of the server WL10.3 started as a Windows Service Instance

  Hello world
  
  I sent my J2EE Application to a stand-alone Server Instance WebLogic (in mode of development) has started from the level of command of Windows via startWebLogic.cmd. I also tested the deployment of a managed Server Environment(1 AdminServer+2 MS Servers in the cluster; development mode) cluster, all servers started from the command line. The application could be tested and everything worked fine.
  
  But:
  When I set up the WebLogic Server instances as a Windows service (as described http://e-docs.bea.com/wls/docs103/server_start/winservice.html) my application cannot be deployed at boot time.
  3 ClassNotFoundExceptions, I get:
  -at the start of the class "DMS-Startup" (oracle.dms.wls.DMSStartup)
  -at the start of the class "ODL-Startup" (oracle.core.ojdl.weblogic.ODLConfiguration)
  -at the start of the class 'Class of startup JPS' (oracle.security.jps.wls.JpsWlsStartupClass)
  
  The Service is started but under Administration Console/deployments the Enterprise Application is marked as 'New' as opposed to 'active '. Other deployments: adf.oracle.domain (1.0, 11.1.1.0.0), (1.2, 1.2.7.1) jsf and jstl (1.2, 1.2.0.1) appear as 'Active'.
  I tried to redeploy the Application directly from the JDeveloper for the autonomous WLS Runspace (one server) - as I did before.
  The deployment has failed:
  [Deployer: 149034] An exception has occurred for task [Deployer: 149026] deploy application... of AdminServer. :.
  weblogic.management.DeploymentException:
  # Incomplete deployment.
  # 25 November 2008 21:58:53
  Deployment failed
  
  Why the deployment on the WLS Instance has started from the command line and why does fail when started as a Windows Service?
  
  I am using WLServer 10.3 and JDeveloper 11 g on Windows Vista operating system - both installed via jdevstudio11110install.exe. My Web Application uses BC and ADF Faces.
  The Windows Service is configured in the following manner in a specific server under the USERDOMAIN_HOME directory script:
  Set DomainName = mydomain
  Set USERDOMAIN_HOME = C:\Oracle\Middleware\user_projects\domains\mydomain
  Set JAVA_OPTIONS = Dweblogic.Stdout =... Dweblogic.Stderr =...
  MEM_ARGS =-Xms40m - Xmx250m set
  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".
  
  And there is another problem with the Windows Service:
  I'm not able to uninstall the service to a specific server scenario, affecting first the DomainName and the SERVER_NAME = AdminServer and that
  use of the call "C:\Oracle\Middleware\wlserver_10.3\server\bin\uninstallSvc.cmd".
  I must do this directly in the registry.
  Missing something? What's wrong?
  
  Help, please!
  Thank you
  Anita
  
  Published by: user586097 on 26.11.2008 11:55
  
  Published by: user586097 on 26.11.2008 12:00
  
  Published by: user586097 on 26.11.2008 12:02

  Hello

  I had the same problem and made an SR by Oracle. Solution, in the script to create the windows service, you must add a call to the setDomainEnv.cmd before the call to installSvc.cmd.

  ..
  MEM_ARGS =-Xms512m-Xmx512m set
  call "C:\Oracle\Middleware\user_projects\domains\USER_domain\bin\setDomainEnv.cmd".
  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".
  ENDLOCAL

  It works now, Peter

• Satellite A200 - STARTING problems, freezes on the connection of the power adapter

  My 3 YO A200 (PSAF3A-08202D has developed a problem with starting.
  I can start on battery power with WINDOWS VISTA BUSINESS (after 10 attempts, but freezes immediately when the power adapter is plugged in.)
  Display sometimes boots wide-screen, but mostly freezes before windows welcome.

  When running, the battery produces about 1 to 2 hours before a complete evacuation.
  When executing a battery, computer freezes when I plug Charger AC/DC immediately and going with my A100 charger as an alternative.

  Initial problem was a faulty hard drive and super hot air flow due to fluff the cooling block fan.
  Tech replaced original 120G HDD with 500 G and reloaded at the factory. works well for 3 months, then started with the same problems so conclude original disk HARD was just a secondary issue.

  So maybe fixed I overheated components on the motherboard. Reset of data cards initially fixed a problem starting but is gradually degraded.

  Reading through the forums seems that there is a huge amount of these laptops with similar issues. Is this a design flaw, like my other Satellite A100 is solid as a rock. All forums, which suggests resetting the cpu is running slow or be disconnected seem to be temporary repairs. Boot in safe mode and reset the default settings have no effect.

  A suggestion that a capacitor is at fault seems to be the fix is valid but which involves specialized tools is not available locally. Local agent of Harvey Norman for Toshiba are best part of unnecessary because they can send in Australia from Toshiba. Machine has been close to $2000 and is now worth Zip.

  I am unable to do anything with this machine, as all the ways of upgrading or resetting calls for AC power available and running.

  I'm about to do radical things and hope that this forum can enlighten us.

  Hi Mickaël

  You might be right. It seems that the motherboard is affected.
  Don't know why but higher temperature can still affect the internal parts.
  The temperature may increase if cooling fans n t working correctly. For example dust or debris leads to a higher temperature because cooling air cannot circulate properly.

  I have to clean my laptop's cooling grilles from time to time using a jet of compressed air. This allows to keep the temperature at the lower level.
  Of course the internal temperature is not always a reason for portable computers hardware malfunction equipment can begin to malfunction as always in an other products too: TVs, cars, game consoles

  I bought an extended warranty for my laptop, also for my LCD TV mercy always if a high-end product begin to malfunction and in the case of a warranty claim, the fault can be fixed free of charge.

• Problems starting yoga 13

  Hello
  I got a new Ideapad 13 of Yoga that has problems starting from time to time, especially when I carry in a backpack.

  This time, the battery discharged when it was suspended. Connecting it to the power, it begins with orange battery LED and says no device detected start and does not detect SSD.

  Power it off and try to restart, it lights. The battery has charged more than 20% but still does not start.

  Long pressing power until it shuts off and try to restart it sees turning white power led for like 1 or 2 seconds then turn off.

  Unplug the power cable and in him plugging back sees so much power and battery LED light white balance, but computer does not.

  He did before, with the behavior of a few hours to a day or more.

  What could be the problem.

  At took the camera to the centre of care. They say that the problem is the battery.

  Kenya Lenovo declined to replace the battery or manipulate the laptop in the future because I bought it in the United States. Maybe it's what is causing the problem, buying the camera in a country of the first world rather than a third world country where the poor customer service is the norm.

  The stellar nursery fixed also the keyboard bad - it now top down bounces when you type keys.

  Laptop computer now boots, but wonder how long before the return of the issue.

  Whether to ship a $75 battery or rteurn think the * bleep * thing and request a refund.

  Lenovo: for those who can not!

• service or group of addiction was able to start; Cannot start the diagnostic policy service

  I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

  Hello, Lesley

  Thank you for using the Microsoft answers Forum!

  The following information is taken from: http://support.microsoft.com/kb/943996

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

  It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista freezing, problems starting mode safe mode, Windows Update does not work, etc.

  Hi all. I am operating Windows Vista Home Premium Service Pack 1, 32-bit on an HP Pavilion dv6000.

  My problems started about two months ago, when I installed several updates through Windows Update. I started having problems with my USB ports (even if these pilots were not being updated) and the computer was never able to close successfully. I tried to uninstall these updates, but that did not fix the questions I had. I have also installed software (AutoCAD 2007) at the same time and uninstalled, nothing helps.

  Then my computer started to freeze after running for a few minutes. Time seems to vary from 5 minutes of good use for 1 hour, but I found that it works only because this so long, I only open a program or file and use it all the time (for example, reading a book in Adobe Acrobat format). If I try to open the program or additional files, go to control panel, etc. (read: if I do everything related to Windows Explorer) the computer crashes. I can still move my cursor but none of the windows meet, and I can't ctrl + alt + delete to enter the Task Manager (I get a black screen).

  I was manually shut down my computer every time that happens and boot in SafeMode several times. Sometimes when I try to start safe mode it is hampering the crcdisk file and turns off. It happens not every time, however. Sometimes, when it starts it running the disk check, and there has been some index files that it has been deleted and orphaned files that it has been moved.

  I tried to do a system restore to a point before the updates I've installed in October, but my computer has no points system, restore even if he says it was their creation before you install these updates.

  The last problem is that when I go to Windows Update, it says that I have never checked for or downloaded the updates in the 15 months that I've had the computer - is not true, I, he lost at the time of all the record of it. So although I would like to provide you with wonderful with a record of what I've updated and people uninstalled, I can't because all this information is gone. In addition, I can't connect to the internet to try to check the news updates, because our internet service runs a USB modem, which is not communicating properly with my computer.

  I hope someone has an idea of what's going on. I just can't understand the common point that all these questions arise, my technology skills are somewhat limited, so I hope for a relatively easy solution.

  Sarah

  BTW, all my files were backed up on external drives.

  I don't know Jack about computers, but I don't know that I went through almost exactly the same thing.  My pc was ok, then in a month or two, it took a nose dive.  something I did was too that much could not think of everything.  A friend told me to reset my bios to default settings and see what happens.  After having spent only 7 hours trying to teach myself on bios, I got stabbed in this area and it worked.  Everything is great runnng.  Now I can even right click on icons without crashing.