Problem starting managed server and Node Manager
Hello
I created the WebLogic domain with 2 managed servers. I use Jdevevloper11.2.3 integrated WebLogic server. I can't start the servers ManagedWebLogic. On the console, I get an error stating:
"For the server Server1, the Node Manager associated with new_Machine_1 of the machine is not accessible."
Nor any of the management server is started through the startManagedWebLogic.cmd. Any help on this?
Hello
To start the managed from the console server, you must first start the node Manager process and then you can start managed based on the console server.
Find the link to the screenshot of how to configure Nodemanager and start the managed server.
NODE MANAGER configuration and starting managed server from Console - weblogicexpert
To start the managed break with start-up follow the link below Scrip.
Starting/Stoping Weblogic Managed Server - weblogicexpert
It may be useful
Tags: Java
Similar Questions
-
I received an email from aol asking me to log in due to problems with my server, it took me to a website "waqu.press.ma" is an attempt to plant a virus? Once that I've trashed this e-mail my server was working normal.
If you are on iOS as implied by your footer, and you provided no identification or such information to the server, you're probably fine. (Unless your device is jailbroken. This process turns off a large part of the iOS security.) If you have provided something IDs, change these now and then determine what other information is accessible using the credentials - the content of mail messages, no password that have been sent to you, etc.
-
Administration server and the servers managed (WebLogic Server).
Hello
What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,
but I don't know what they are?
I saw them while I was reading on the Node manager that allows me to start the above mentioned.
-J' installs the WebLogic to develop applications with oracle reports and forms services.
1 - do I need a node Manager, Administration Server or managed servers?
2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?
Thank you very much
Answers to most of your questions WLS lie in WLS documentation:
http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm
However, a simple answer to your questions could be summed up as follows.
If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing. In the context of WLS, a managed server is responsible for hosting java applications on the server side. For example, Oracle Forms Servlet. The WLS management server is actually a java application deployed on a managed server. So, really, the "Admin" server is a kind of "Managed Server". In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:
- Server Admin
- WLS_FORMS
- WLS_REPORTS
Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.
http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm
Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet. However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).
All these components are much more complex than what I've described here. I would recommend to consider the documentation if you are interested in learning about them. That said, the best way to really learn about them likely will be to install the product and start using it.
-
Hello
I met the following WebLogic errors during startup. I use WebCenter Content Server 11.1.1.8 or WebLogic 10.3.6. I managed to start the server and not having problems so far, but I'm curious about the error.
System = SunOS
Output = 5.10
KernelID = Generic_150401-11
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
/opt/Oracle/middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/bin/startWebLogic.sh: =: $: not found
export ALT_TYPES_DIR
export ANT_CONTRIB
export ANT_HOME
export APPLICATIONS_DIRECTORY
export ARDIR
export BEA_HOME
export BEA_JAVA_HOME
export CLASSPATHSEP
export CLUSTER_PROPERTIES
export COHERENCE_HOME
export COMMON_COMPONENTS_HOME
export CUSTOM_MEM_ARGS_32BIT
export CUSTOM_MEM_ARGS_64BIT
export DATABASE_CLASSPATH
export DEBUG_PORT
export DERBY_CLASSPATH
export DERBY_FLAG
export DERBY_HOME
export DERBY_OPTS
export DERBY_SYSTEM_HOME
export DERBY_TOOLS
export DOMAIN_HOME
export EXTRA_JAVA_PROPERTIES
export FEATURES_DIR
export FMWCONFIG_CLASSPATH
export FMWLAUNCH_CLASSPATH
export JAVA_DEBUG
Export JAVA_HOME
Export JAVA_OPTIONS
export JAVA_PROFILE
export JAVA_PROPERTIES
export JAVA_USE_64BIT
export JAVA_VENDOR
export JAVA_VM
export LD_LIBRARY_PATH
export LONG_DOMAIN_HOME
export MEM_ARGS
export MEM_ARGS_32BIT
export MEM_ARGS_64BIT
export MEM_DEV_ARGS
export MEM_MAX_PERM_SIZE
export MEM_MAX_PERM_SIZE_32BIT
export MEM_MAX_PERM_SIZE_64BIT
export MEM_PERM_SIZE
export MEM_PERM_SIZE_32BIT
export MEM_PERM_SIZE_64BIT
export MODULES_DIR
export MW_HOME
export OBJECT_MODEL
export OCP371_PATCH_CLASSPATH
export OCP371_PATCH_EXT_DIR
export OCP371_PATCH_LIBPATH
export OCP371_PATCH_PATH
export ORACLE_DOMAIN_CONFIG_DIR
export PATCH_CLASSPATH
export PATCH_LIBPATH
export PATCH_PATH
export PATH
export PATHSEP
export POST_CLASSPATH
export PRE_CLASSPATH
export PRODUCTION_MODE
export PROTOCOL_HANDLERS
export SAMPLES_HOME
export SERVER_CLASS
Export SERVER_NAME
export SUN_JAVA_HOME
export UCM_ORACLE_HOME
export WEBLOGIC_CLASSPATH
export WEBLOGIC_EXTENSION_DIRS
export WLS1036_PATCH_CLASSPATH
export WLS1036_PATCH_EXT_DIR
export WLS1036_PATCH_LIBPATH
export WLS1036_PATCH_PATH
export WLS_HOME
export WLS_JDBC_REMOTE_ENABLED
export WLS_MEM_ARGS_32BIT
export WLS_MEM_ARGS_64BIT
export WL_HOME
export XMS_JROCKIT_32BIT
export XMS_JROCKIT_64BIT
export XMS_SUN_32BIT
export XMS_SUN_64BIT
export XMX_JROCKIT_32BIT
export XMX_JROCKIT_64BIT
export XMX_SUN_32BIT
export XMX_SUN_64BIT
export debugFlag
export doExitFlag
export enableHotswapFlag
export iterativeDevFlag
export logErrorsToConsoleFlag
export testConsoleFlag
export verboseLoggingFlag
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
.
.
Memory of JAVA arguments: - Xms2048M-Xmx2048M - XX: MaxPermSize = 512M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX: + PrintGC - XX: + PrintGCDetails - XX: + PrintGCDateStamps
.
Start mode of WLS = Production
.
CLASSPATH=/opt/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/opt/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/webcenter/jdk/lib/tools.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ opt/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/opt/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/opt/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
.
PATH=/opt/Oracle/Middleware/wlserver_10.3/server/bin:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/apps/webcenter/jdk/jre/bin:/apps/webcenter/jdk/bin:/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/sbin:/bin
.
***************************************************
* To start WebLogic Server, use a username and *.
* password assigned to an administrator-level user. For *.
* server administration, using the WebLogic Server *.
* console in http://hostname/ReportServer: port/console *
***************************************************
from weblogic with the Java version:
Java version "1.7.0_79".
Java (TM) SE Runtime Environment (build 1.7.0_79 - b15)
Java hotspot Server VM (build 24, 79 - b02, mixed mode)
WLS starting with line:
/Apps/WebCenter/JDK/bin/Java-serveur-Xms2048M-Xmx2048M - XX : MaxPermSize = 512 M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX : + PrintGC - XX : + PrintGCDetails - XX : + PrintGCDateStamps-Dweblogic.Name=AdminServer-Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-da-Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3-Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dcommon.components.home=/opt/Oracle/Middleware/oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN-Djrockit.optfile=/opt/Oracle/ Middleware/oracle_common /modules/Oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.server.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/servers/AdminServer-Doracle.domain.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig-Digf.arisidbeans.carmlloc=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/carml-Digf.arisidstack.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/arisidprovider-Doracle.security.jps.config=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/jps-config.xml-Doracle.deployed.app.dir=/opt/Oracle/Middleware/user_projects/domains/ WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user - Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Ducm.oracle.home=/opt/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/opt/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1036/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_ocp371/profiles/default /sysext_manifest_classpath weblogic. Server
< 6 November 2015 10:39:08 SGT > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 6 November 2015 10:39:09 SGT > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 6 November 2015 10:39:09 SGT > < Info > < WebLogicServer > < BEA-000377 > < since WebLogic Server Java hotspot Server VM Version 24, 79 - b02 of Oracle Corporation >
< 6 November 2015 10:39:12 SGT > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 Nov 08:52:36 PST 1441050 2011 >
< 6 November 2015 10:39:16 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 6 November 2015 10:39:16 SGT > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 6 November 2015 10:39:16 SGT > < opinion > < Log Management > < BEA-170019 > < server log file /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/logs/AdminServer.log is open. All events in the log server-side will be written to this file. >
< 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090083 > < identity of start of storage in the file: /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/security/boot.properties >
< 6 November 2015 10:39:32 SGT > < WARNING > < Store > < BEA-280109 > < unable to load native library wlfileio for the persistent store file '_WLS_AdminServer '. The Bank will use I/O in the buffer. The store is still in business in a point of view transactional secure synchronous mode. See store open log messages for requested and final write policies. >
< 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 6 November 2015 10:39:47 SGT > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 6 November 2015 10:39:48 SGT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the em of the application is not versioned. >
< 6 November 2015 10:39:53 SGT > < WARNING > < J2EE > < BEA-160140 > < optional references package suspense (in META-INF/MANIFEST. (MF): [Extension name: oracle.rules referenced from: / opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user/emai/xalnv4]. Check that the referenced optional package has been deployed as a library. >
< 6 November 2015 10:39:55 SGT > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Information ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Performance ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Response ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Servlet_Response ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Remote_Bridge_Elements ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < metric "webcache:request_filter_denied_stats" table has no key column. It will not be seen. >
PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.
< 6 November 2015 10:40:06 SGT > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature. >
< 6 November 2015 10:40:07 SGT > < WARNING > < oracle.mds > < BEA-000000 > < by default CharSet US-ASCII is not a unicode character set. Filenames with non-ASCII characters may not work as expected. Check regional settings. >
< 6 November 2015 10:40:11 SGT > < WARNING > < org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl > < BEA-000000 > < Configurator services already initialized. >
< 6 November 2015 10:40:19 SGT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
< 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.21.102.239:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 10.253.163.194:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.24.143.146:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 192.24.143.2:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 127.0.0.1:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on 192.24.143.68:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000329 > < started WebLogic Admin Server "AdminServer' field 'WEBCENTER_CONTENT_DOMAIN' running in Production Mode >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
< 6 November 2015 10:48:36 SGT > < warning > < WebLogicServer > < BEA-000396 > < server shutdown was requested by admin >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed suspension >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to SHUTTING_DOWN >
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [2] "listening on 192.21.102.239:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [1] "listening on 192.24.143.146:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was "Default" channel to listen on 192.24.143.2:7005 > stop.
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [5] "listening on 127.0.0.1:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [4] "listening on 10.253.163.194:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < channel "Default [3]" was listening on 192.24.143.68:7005 > stop.
Have you followed the installation guide and completed all the pre-requisutes?
Please check:
ls-l /usr/lib64/libstdc++.so.5
-
Bytes of TCP IP and subset of bytes for the connection of server and clients
Hello
I have a problem on the server and the client connection using the TCP/IP protocol. In the client, I have 41 cases, 1 case of timeout, others are for the case of button when they are pressed and then the LED on the server will be to market and if a click again the led will be off. But when I reached cases 10, 11, 12 up to the 41 (key case), that the LED lights if you click only once, but when he double clicked then the light does not turn off. So, how you solve the problem? Is this subset or bytes to read because the first subset is 1 case but no 10 to 41 will not work, but I change the subset in 2 then the case works for don't light the LED, but it do not work to turn the LED off.
I also download the vi in this for reference.
the user name for the client is the user and the password is pass.
Thank you
Hi ican.
you have not changed the customer. See the attached picture. The error in the server side, it's that the 4 was connected on the two functions of split to the length. See Server for the necessary difference image.
Mike
-
Could not start the server via the SOA node Manager
Hi all
I try to install AIA 11.1.1.6.0 on top of the SOA Suite 11.1.1.6.0.
I was able to install the weblogic, UCR, soa and osb servers server correctly. Now, before installing the AIA, the document I am following it says, make sure to start the server soa through the Manager of nodes.
Now I start to the administrator of the server, then the node Manager, to make sure I checked the node Manager is in place, I logged the weblogic console, went to the Machines, and I see that it's upward and accessible.
Now using WLST commands, first of all, I have connected to Manager nodes by using the nmConnect() command, so I try to start the server soa through node Manager with the command start ('soa_server1').
I get an error when you try to start the server with the command nmStart() soa, below is the error message...
«Error at startup server soa_server1: weblogic.nodemanager.NMException: Exception when starting Server «soa_server1»»
I ran the command dumpStack(), and I get the output as 'no trace available battery.
If I am able to start the server soa through the node Manager, I can go ahead and install the pack of AIA, but wrong to let me go forward.
I also tried to boot the server from soa through the weblogic console, go to the servers tab, select the soa_server1 and start, the State of the soa server will "FAILED_NOT_RESTARTABLE".
I followed some of those blogs like...
http://Neeraj-SOA-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
Experts, please give your opinion.
Thank you very much
NHi Patricia,
I had exactly the same problem some time ago...
The cause:
There are two servers trying to run in debug mode and use the same debug port
-Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = nPossible solutions:
1. turn off debugging (this is what I did)
2 use the various debugging ports to different servers (difficult to do because the servers share the same scripts)What worked for me was:
1. in % DOMAIN_HOME%\bin, I created a script called startWebLogic_nodebug.cmd with the following content:
%CD%\bin\startWebLogic.cmd /nodebug % *.
2. in nodemanager.properties, I changed the following property
StartScriptName = startWebLogic_nodebug.cmdNow my servers start without debugging...
I hope this helps.
See you soon,.
Vlad -
Stop a server managed using WLST and Node Manager
Hello
I use Node Manager (NM) to start my managed servers. After connecting to the Server Admin, I run the command:
Start ('myserver1', 'Server')
I check the log file and the console and the managed server shows no error, either it RUNS. The tail of the log file says "SOA platform is running accept queries"
I'm now trying to write a script to stop for the same managed servers. I connect to the Node Manager via wlst, connect to the Admin Server successfully and deliver:
Shutdown ('myserver', 'Server')
Here is the error I see in the managed server log file:
[JCABindingManager]: this operation is not supported for JCA base MDB.
The managed server then passes State SUSPENDED.
I have renamed the data files, cache and tmp, restarted the server and once again tried to arrest him, but the same thing happened.
Any suggestion is appreciated.
Thank you
Andy
What happens if you add strength = "true" as an additional parameter for your
stop command?
-
Problem with El Captain (5.1.7 server) and the management of permissions
Hello world
I have a big problem with our Mac Mini Server (El Captain) and the server program.
In recent weeks, the server didn't give the permissions of a folder.
for example:
Mr. X had permission to read and write to a folder.
Mr Y too.Mr. X has create a new folder one record something in it.
Mr Y had the permission to read or write to the folder create Mr. x. But he should have.
Or
Mr. X has save a file to a folder
When he opens it again it is write protected and cannot be replaced.
So you have to save under a different name in the same folder.
And every time he save/close the file.
Anyone know what could be the problem?
Thank you
Greetings from the Germany
Chris
My guess:
A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.
C.
-
How can I start the BI and ODI Managed Servers?
Well,.
I read at step 4 of Doc-ID 1589540.1 the following:
"BI applications requires the BI and the ODI Managed Servers (bi_server1 and odi_server1) should be started via the node Manager. This setting is required for settings, memory, and jvm arguments are correctly defined.
Starting not not the BI and managed servers of ODI can lead to memory problems and the loss of functionality BI Applications Configuration Manager, the Manager of functional installation and ODI.
To ensure that the BI and ODI Managed Servers are started through the node Manager, start using the Console of Administration WebLogic user interface. Do not start the BI and servers managed by ODI by using the managed server start script. »
Well, as I'm new Weblogic management, then, what are the steps to start all of the services? (I have OBIEE, ODI and Bi Apps on the same server).
I mean, was that you should not start their script. What is the proper sequence and how should I do this?
Could someone help me on this?
Thanks in advance...
the appearance of the home screen for environment-> servers-> here you will see the admin and managed servers-> click the tab control and then check off the boxes related to managed servers, and then click start that's all
-
Is it possible to start the server managed through the weblogic console
Is it possible to start the Manager of servers such as soa_server1 and oim_server1 of weblogic console? Please I need your helphttp://docs.Oracle.com/CD/E23943_01/apirefs.1111/e13952/TaskHelp/startstop/StartManagedServersFromTheAdministrationConsole.html
http://onlineappsdba.com/index.php/2010/04/10/WebLogic-error-starting-managed-server-from-console-node-manager-associated-with-this-machine-is-not-reachable/-nayan
-
Starting the server managed via the Script
In our environment Windows, we start the servers managed through the Manager of nodes, but one of our requirements must be able to start managed servers when the administrator of the server (server1) breaks down. I found a way to start the servers managed through the startManagedWeblogic scripts, but they all use the default memory, the classpath and the arguments of the default file (assuming that it becomes startWebLogic.cmd and setDomain.env files). My desirable best practice would be to create a separate server for each of my servers managed script and he's ready to run rather than hack the same file and the differences in memory, the classpath and arguments for each server entry. All in the interest of faster availability.
So here are my questions:
(1) I guess I'll make different copies of the startManagedWebLogic.cmd and customize the file for each of them to the memory of managed servers, arguments, and classpath?
(2) will be customizing all files in startManagedWebLogic.cmd that I copied for each server or the startWebLogic.cmd will changes too? (I assume that anything put in custom scripts startManagedWeblogic.cmd replaces the default values in the startWeblogic.cmd)?.
I found some useful information in the link below, but he starts from the principle that all of your managed servers have the same memory, the arguments of server startup and railways class, which is rarely true world. I thought I had a job and possible response to this to a point, but can't seem to find it. If details or links that anyone can provide that tells me how to crush the default values and the correct file to update and (b) the details in this file on where and how to upgrade the memory, arguments and classpath (a) will be rewarded largely with large amounts of points :)
http://download.Oracle.com/docs/CD/E12839_01/Web.1111/e13708/overview.htm#i1070244
Thank you"So should I add all my servers and their USER_MEM_ARGS to the setDomainEnv and then just run the standard not published startManagedWebLogic.cmd one... »
Bingo.
"Then, there at - it a way to have him pick up the classpath of managed servers nodemanager uses or edits the file commEnv the only way to do it?
When you use the scripts such as startManagedWebLogic, the commEnv file is the only way.
When you need to change the server classpath (and all the server need managed the library), you can just drop the
jar file in the ${DOMAIN_HOME} directory / lib. Jars placed in this directory is automatically added to the system
classpath.«.. . and dance at your next wedding. »
For this, I'm going to get a divorce and the invitation will be on your doorstep in a few weeks.
-
Help, please! Windows WebLogic admin server and managed server service
Hello
I have an admin server and 2 managed servers. I want to create a windows service so that my server admin and 2 managed servers start as a windows service.
I'm following the documentation at: http://weblogic-wonders.com/weblogic/2011/02/01/weblogic-as-a-windows-service/
but I have problems understanding as the documentation lacks some important points. It says that I need to create a custom startup script.
Can someone please tell me: -.
(1) I have to create 3 different with 3 different (one for the server admin) file names and 2 for managed servers?
(2) what should be the names? I've created a script with the name startAdminServer.cmd for the administrator of the server to destination = > C:\Oracle\Middleware\user_projects\domains\base_domain\config\startup but it gives me an error when I try to run the script by saying 'the file name, directory name or volume label syntax is incorrect. "
(3) is the content of the script correct admin = >
SETLOCAL
Set DomainName = Wonders_Domain
Set USERDOMAIN_HOME = C:\BEA103\user_projects\domains\Wonders_Domain
Define SERVER_NAME = AdminServer
Set WL_HOME=C:\BEA103\wlserver_10.3
Set WLS_USER = weblogic
Set WLS_PW = weblogic
Set PRODUCTION_MODE = true
MEM_ARGS =-Xms512m-Xmx512m set
Call "% WL_HOME%\server\bin\installSvc.cmd".
ENDLOCAL
(4) after I executed the script mentioned above what are my next steps? I create a similar script as the one above for example managed servers and run them individually?
(5) after I ran all 3 scripts change the installSvc.cmd file to set a delay so that the managed servers start after the server administrator? How do I do that?
I would appreciate any assistance. Please let me know if you have any questions. I tried to explain it the best possible.
Published by: user9021545 on April 26, 2011 17:26
Published by: user9021545 on April 26, 2011 17:28
Published by: user9021545 on April 26, 2011 17:28Hello
The post below
http://WebLogic-wonders.com/WebLogic/2011/02/01/WebLogic-as-a-Windows-service/
shows how we can make the server administrator and the server run as a windows service, referring to an area of sample called 'Wonders_Domain '.
Your questions:
(* 1) I have to create 3 different with 3 different (one for the server admin) file names and 2 for managed servers? *
Rep. : Yes, the settings of the server administrator and the managed server are different then you its recommended to have scripts for each of the servers.
(* 2) what should be the names? I've created a script with the name startAdminServer.cmd for the administrator of the server to verbal-online C:\Oracle\Middleware\user_projects\domains\base_domain\config\startup but it gives me an error when I try to run the script by saying 'the file name, directory name or volume label syntax is incorrect. " *
Rep. : The name is not important. The values contained in the script should be relevant to your area of work environment.
The values in the pasted script refers to the environment of the author, replace them with your own environment settings.
You can specify the servername, DomainName, USERDOMAIN_HOME, WL_HOME according to your environment.
Please let me know if you have any other questions.
Kind regards
Julien
http://WebLogic-wonders.com/ -
SE PermSize: Memorry error starting managed server
Dear all,
I have installed SOA 11.1.1.3 version on my PC (running windows XP sp2, 4 GB of Ram). Installtion is filled sucesfully. I started weblogic Admin server and Server Manager. Admin Server is started successfully. "" But server manager does not start, and in the newspapers, it is shwoing as Momery "PermSize: Cache.
So can you please someone help me to solve this problems.
Kind regards
yearsYes that's correct.
You can start the server like this: startManagedServer.cmd
If you have set the JAVA_VENDOR as Oracle, then you should have installed JRockit. Otherwise it will fail to start.
-
Could not start the Server manage WLS 10.3 portal area
WLS 10.3 domain server management portal is not commissioning and its lifting special suite.
com.bea.common.engine.SecurityServiceRuntimeException: [Security: 097533] SecurityProvider service
the class name for WSRPIdentityAsserter is not specified.
Listed below is the workaround available for this questions.
1. modify the file $BEA_HOME/wlserver_10.3/common/nodemanager/nodemanager.properties on the node
"to use instead of Java startup scripts: change the line"StartScriptEnabled = false"to say StartScriptEnabled = true '.
2. Add the following parameter to the - Dweblogic in the JAVA_OPTIONS or add the following to the Console of administration-> server-> Configuration-> server to block Arguments start page. :
Add «-Dweblogic.alternateTypesDirectory=/$BEA_HOME/wlportal_10.3/portal/lib/security.
When these data are transmitted to the NodeManager, the management server will start without error.I thought I would include my 2 cents on this... These are two solutions that I discovered while trying to go beyond this issue:
WARNING: OS = linux 64-bit JRE = JRockit
You can quickly get the version of "script" of the NodeManager on modifying the file $BEA_HOME/wlserver_10.3/common/nodemanager/nodemanager.properties on the managed server (node).
1. stop the NodeManager process runs.
2. change the file $BEA_HOME/wlserver_10.3/common/nodemanager/nodemanager.properties:
Change the line "StartScriptEnabled = false" to say StartScriptEnabled = true '.
3. restart the NodeManager.
(4 start the managed through the administration Console node).
(Not mandatory) options: you can adjust the JVM, JVM args, Classpath, and other elements that define [start] managed server by changing the $DOMAIN_HOME/bin/startWebLogic.sh, $DOMAIN_HOME/bin/startManagedWebLogic.sh, $DOMAIN_HOME/bin/setDomainEnv.sh [on the managed server].You can get the "java version" of the NodeManager in operation as follows:
1. DO NOT CHANGE THE $BEA_HOME/wlserver_10.3/common/nodemanager/nodemanager.properties FILE. Check "StartScriptEnabled = false".
2. Add «-Dweblogic.alternateTypesDirectory=/$BEA_HOME/wlportal_10.3/portal/lib/security"in the Admin Console-> Server-> Configuration-> server start page (block of Arguments).
(3 start the managed node thought the Admin Console.)Of course, all the WLST (nmEnroll) work must be done to enable the NodeManager (s) remotely to connect to the Admin - but that is well documented.
I heard that a Windows environment can be a bit different - that the 'script' version requires the additional 'java-version' changes in the block of the Arguments of the administration Console-> Server-> Configuration-> server start page. I can not confirm nor say prove...
-
Hello!
I have received many updates of Windows XP in the last days and now wonder if they have something to do with it. Changed my download manager Free Download Manager - but the problem presists. Reinstalled ZoneAlarm fire-use of codecs-Klit-no wall - and the media.
Have the same problem with different browsers and their integrated download managers. No problem downloading software, music and video files.Latest updates on 10/29/09: KB975025/974112/974571/969059/975467/958869/971486 and Media Player KB954155.
Thank you
Hello Jay,
Welcome to the Microsoft Answers site!
I have a few questions about your question:
(a) not you get an error when you try to download?
(b) where you are trying to download music and video files from?
Method 1:
You can try the system to the boot and they try to download the files. Any program background may interfere with the download. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
The steps to perform a clean boot are given below:
Step 1: Open the System Configuration utility
1. click on Start, click run, type msconfigand click OK.
2. the System Configuration utility dialog box appears.
Step 2: Configure selective startup options
1. in the System Configuration utility dialog box, click the general tab, and then click Selective startup.
2. Click to clear the Process SYSTEM. INI file check.
3. Click to clear the process to WIN. INI file check.
4. Click to clear the Load Startup items check box. Check The Load System Services and to use Original BOOT. INI are checked.
5. click on the Services tab.
6. Click to select the hide all Microsoft Services check box.
7. click on disable alland then click OK.
8. When you are prompted, click restart to restart the computer
Once you have set the system boot, you can try to download the files and check if you get the same problem or not.
For more information about the clean boot, follow the below given link:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
When you have finished downloading, follow these steps to reset the computer to start as usual:
1. click on Startand then click run.
2. type msconfigand click OK.
The System Configuration utility dialog box appears.3. click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.
4. When you are prompted, click restart to restart the computer.
Method 2:
Alternatively, you can try to reset the TCP/IP settings.
Note This section is intended for computer savvy users. If you are not comfortable with advanced troubleshooting, ask for help or contact Support.
The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:
1. to open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:
cmd
2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt
Note If you do not specify a path of the directory for the log file, use the following command:
netsh int ip reset resetlog.txt
3. restart the computer.
First, you download the Fixit from the given link and run it, if that does not work then try to do it manually.
http://support.Microsoft.com/kb/299357
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
macOS Sierra Siri behind corporate proxy
When using wired Ethernet to work, I network settings configured to use Automatic Proxy detection. All my other network services (Messages, Mail, Safari, etc.) work fine, but systematically reported Siri, "sorry, I'm having problems with the connect
-
The connection has been reset during load error 101 help page
When loading some websites, all browsers and all computers, I get the following error message: "error 101 (ERR_CONNECTION_RESET net) connection was given to zero." & or: "the connection to the server was reset while the page is loading." Anyone know
-
New Satellite L855 - 14K is very slow
Hi people - advice on this would be appreciated... I bought a Satellite L855 - 14K about 2 weeks ago and I am very disappointed to see that sometimes it's extremely slow. For example, enter my password on the screen of welcome to the ZoneAlarm and Av
-
How contact obtained in the mailing list, but no contact list so it can be removed
How room sexy chick get in the contact list send and how to remove them from the contact list send when not on the list of regular contacts
-
Cannot delete a podcast MP4 file to address National Geographic
New Tower Dell with Vista Home Premium, Windows Media center etc.The problem (NGVIDEOS_PC1_machupiccu 15.1 Mb MP4 file) file I got from my old drive hard (I had no will).After re - organize my media files, I tried to delete said file. Despite the cha