problem starting my laptop HP15

Similar Questions

• When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem

  Hello

  When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

  Can you help me

  Thank you

  Original title: Cprogram

  Hello

  Method 1:

   I recommend you put the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• laptop HP 2000: how to start my laptop hp 2000 pc using CD ROM

  I NEED TO START MY LAPTOP HP 2000. BUT I DON'T KNOW HOW TO START USING CD ROM. CAN U GUYS HELP ME SOLVE THIS PROBLEM

  Hello

  To install Windows 7 64 bit on a disc with a guid partition table you need to do the following.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation disc and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the CDROM (uefi) option ( Note: you must choose the cdrom option that has the (uefi suffix ) and press ENTER - if you are prompted to "Press any key to continue...) "- make.

  Kind regards

  DP - K

• Problem starting on Tecra M9

  At startup, laptop remains to the first splash screen.
  The Red "in touch with tomorrow Toshiba" logo. with the six icons below and the logo of intel in the lower right corner.
  I can't get the laptop to move forward beyond this screen.

  This message appears if you hold down the "n" as it is:
  Intel Boot agent GE v1.2.45
  copyright etc.,
  PXE - E61:media test failure, check cable
  PXE - MOF: exit Intel boot agent

  I should also add that it happened once my computer had deflected while I was watching a movie and since then it has not restarted.

  Basically, I was wondering if it was a clear signal of a specific hardware malfunction or if I have to take to a repair shop to find out.

  Hello

  Start the laptop it will be checked that peripheral startup is defined as the first. If there is some problem will be then checked the second and so on.
  For most HARD drive is defined as optical drive first one, as a third and so on. There is also a LAN device and this message, you see on the screen is that mobile phone evidence trying to start using LAN device as a boot device.

  To be honest I don't know what the problem is here, but it turns out that all the devices listed in front of LAN cannot be used as a boot device. The question is why HARD drive cannot be used as device startup.
  For some reason your Tecra cannot access HARD drive.

  HARD drive is recognized correctly in the BIOS settings?
  If you have some CD or DVD bootable (Linux or Windows install disc), check if the HARD disk is visible/available for installation.

• Problem starting with the Satellite A500-134

  Hi guys

  My laptop is a few years and two months back, the battery has just stopped charging (death), but because of the work schedule, I didn't get time to replace.

  In any case, I was working on a report and took a 20-minute break and when I came back the laptop was turned off by itself and that a single led white light for the AC adapter was.

  When I pressed the power button the camera and light led light power which ends of the AC adapter / light turned on and at the end a dry stop the laptop with the power and the orange light battery light on. Orange light battery led was off after 6-8 sec.

  I tried again and again and the same thing is happening

  Can someone please tell me what is the problem that I really need to finish this report and I am lost.

  Thank you in advance for all your backup stream.

  Try resetting your laptop. Unplug the power plug, remove the battery and press the power button for 20 seconds. After leaving it for a while, only connect the power supply and try to start your laptop.

  What happens when you do this?

• Re: Satellite A300D-13 has: problems starting - starts not or only black screen

  Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

  If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

  In the Bios I have change the boot order of the sources (I can't change it much more)

  I am grateful for any kind of help.
  Thank you for your cooments in advance

  Hello

  The issue could be related to software, but also for the hardware problem.
  But first, we have to check if it s a software problem.

  You are using the original operating system preinstalled by Toshiba. Is this good?
  AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
  In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
  HARD drive recovery option can be used to reinstall and update the operating system.
  I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

  This option will start the recovery procedure and the BONES to relocate again.
  Please check if a new facility will improve the situation with Notepad.
  In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

  If this suggestion won't help you then whole notebooks material must be check by a local ASP.

• Problem starting Equium L40

  Hello

  I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

  The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

  I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

  Maybe there is a battery backup I can change to fix the problem?

  Any help would be appreciated?

  Hello

  Laptop should also work without battery but connected to the power adapter
  So I guess that your motherboard is affected in some way.

  If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

  However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

  Check it out!

• Problem starting Satellite M70-173

  I have a problem with my laptop, since uninstalling Norton Internet security, I had a program to freeze. The only way to stop it was to maintain the power key. Since then, when I turn the machine when starting the machine to start and after about 1 sec no activity. I don't get the start-up of the screen. If I leave the laptop for several hours I can start and after a short period the computer freezes once more and I can't restart. I noticed several people reporting this kind of problem but cannot find any solution. Can anyone help?

  Thanks in advance

  Hello

  I really wonder what problems people have with laptops. I have Satellite M70-159 over one year and never noticed anything like that.

  Operating system is installed with recovery DVDs and the first thing I do after recovering is to remove Norton antivir application. Trust me I did it more than 10 times and never noticed any a? freezinga? questions. I don't know what you're doing, but if I remember well, there are two entries for Norton in Add/Remove programs.

  At first remove a? UpdateA Norton Live? and later Norton app itself. Overview you will find under http://support.toshiba-tro.de/kb0/TSB6B01NM000ER01.htm

  I don't know where you have founded a? several people reporting this kind of problem? but I can say for sure, it may not happen because of Norton. There must be something else. Maybe you deleted some other tips and startup procedure cannot be done correctly. It's really not easy to say what the problem is here.

  I recommend you to install OS using recovery delivered DVDs. When finished remove Norton as described in the document of Toshiba. I hope that everything will be OK again.

  Good luck!

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Satellite A210 - 1 4 - failed to start the laptop computer just orange light

  OK, so this is what happened:

  While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

  I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

  I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

  ANY IDEAS?

  Hello!

  I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
  You can start without WiFi card?

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

  Good bye

• Problem starting with Satellite A210-183

  Hi to you all.

  My name is Costis and I have a starting problem with my laptop. The laptop runs Vista and it was bought in November 2007.

  I have the following message:

  "Windows has encountered a problem communicating with a device attached to the computer.
  This error can be caused by unplugging a removable storage device, such as a hard drive or a cd-rom drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.
  Status: 0x00000e9
  Info: An unexpected i/o error has occurred. "

  Can you help me how to do?

  Thanks in advance,
  COSTIS

  Hello

  What devices are connected to the machine? Some external HDD´s or DVD readers? Would be interesting to know because this error is caused mainly by external media/devices that are not properly connected to the laptop or a malfunction.

  I recommend to unplug everything from your machine and check if the error reappears. So I would suggest to backup all of your important data and retrieve the machine completely (maybe it s a related problem of the software).

  If that's not enough then come back and talk to us more this question.

  Welcome them

• Problems starting satellite L350D-206

  Hello!

  I bought this laptop about 6 months ago and until recently, it has worked quite well...
  Unfortunately a week ago it stopped by itself for no apparent reason (the event was not blocked, as a matter of fact, the laptop was not yet hot and the battery was going well according to the LED) and since then it just won't start. The screen remains black, external monitors as well, it seems not to be able to communicate with the hard drive at all (the LED shows no signs of activity).

  Has anyone else had similar problems and could advise me on what to do?
  Thanks in advance,
  Max

  Hi Max

  What happen exactly when you try to start your laptop?
  Can you see Toshiba welcome screen or even enter the BIOS settings?

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• HP ENVY 15 J109TX: Problem starting Windows HP Envy 15 J109TX

  Hello

  My laptop has a problem starting the OS.

  Same recovery does not work.

  I gave to the service center for repair they me contact number of drive recory.

  So, I called the 1800112267 number, but they told me to contact the Service Center.

  The one you suggest how I can fix it.

  BONES recovered by the service center!

  Don't know how!