Problem syncing offline with online

Similar Questions

• Problem syncing Bluetooth with headset Samsung level U

  I have an iPhone7 and the SW last update 10.0.2.  Bluetooth is turned on and the headset is also turned on.  The iPhone is not recognized/sync with the headphones?  As I know there is no way to update the firmware in the helmet.  I have another device and the phone synchronized without problems.  All the world has faced questions?  Headset works great on your old phone.

  to connect a bluetooth headset to a device, it has not been connected with before forcing the user to place the headset in pairing / discovery mode, how it's going to depend on the headset and should be in the manual of headset

• problems syncing multifunction with PCI-6229

  Hi, I use PCI-6229 and LabVIEW 8.0 for synchronized of the thermocouples and voltage measurements. The diagram is attached here. Here are my questions:

  (1) with the analog inputs of TC is ranked very first and followed with inputs analog voltage, as shown in the diagram, it works fine. But once the tension AIs are placed first and followed with AIs for thermocouples, thermocouple reading makes no sense, for example telling 25 deg C, the program shows strong fluctuating temperature 10-80 deg C.

  (2) the delay time using DAQmx Trigger, here I put the Start.Delay = 2, Start.DelayUnits = ticks. And sampling rate = 1000 Hz for sample clock VI. Then, is equal to 2 X (1/1000 second) delay time = 2ms? If no deadline is set, which is the time between the trigger signal and actural reading? Will it be the time device resolution 50 ns?

  All entries would be very appreciated.

  

  Hi Matt11,

  (1) the order that you specify strings in your task will affect the order of scanning.  In other words, when you add the channels voltage before channels of temperature, the material can enjoy the tension or s channels followed by the string (s) temperature.  Since the 6229 is multiplexed, it comes to each channel sequentially switching in a single ADC.  In your case, it seems that the tension on the ADC to measure voltage not had time to resolve completely prior to taking the measure of temperature.  We refer to this sometimes as ghosts in extreme cases where the value measured on channel b mimics the tension on the channel.

  I think that you have found that you can get this by adding the TC task first.  You could probably also get the same result by allowing more break-in between channels on your scan list.  You can set the time between the channels with a Timing DAQmx property node (you can set the property is the clock frequency convert, which is the opposite of a waiting time).  For slow sampling rates, sets DAQmx convert a default clock rate up to a minimum of 1/14 US (on the x 622).  If your overall sample rate is less than 1/14 us (about 71 kHz) then you should have room to lower the clock rate to convert more of this if you wish to allow more time to settle between the channels.

  I'm a little surprised that you see errors because of it (generally, the problem comes from a signal source of high imepdance measure or when sampling at higher rates), but then again, the temperature measurement would be very sensitive to small voltage fluctuations since you deal with thermocouple voltages at room temperature.  Given the order of scanning affects your measure the problem is almost certainly introduced leaving not enough time for the ADC to settle after reading your string tension.

  (2) ticks means actually timebase tick rather than the graduations to sample.  The minimum is always 2, but this match 2 graduations of 20 MHz (100 ns) time base from which the sample clock (unless you choose otherwise or specify a sampling rate less than 20 MHz / 2 ^ 32), instead of 2 graduations of the 1 kHz sample clock (2 ms).  In fact the trigger is probably performed asynchronously at the base of your time, if you are anywhere between the graduations of 1-2 the basis of delay time (50-100 ns) according to the relative phase of the trigger to the time base.  If no time limit is set, the default value according to me is still 2 ticks which is the minimum that allows hardware (you can check on your own by reading the property node if you wish).

  These points should be compatible between different driver versions, with the exception that DAQmx chose by default convert rate differently in earlier versions of 7.4.  Select the conversion rate is a compromise between the settling of deadlines and the channels are sampled how "simultaneously" on the MULTIPLEXED Board.  The final result in point 7.4 of DAQmx was a compromise apparently arbitrary add 10 US for the minimum conversion period and use this as the maximum by default between the channels.  The user can of course always set the clock to convert to all what best fits their application (in your case, you might want to allow a settlement more between each channel).

  Best regards

• problem syncing iPod touch with iTunes

  Hi, I had a problem syncing my iPod touch with iTunes. I get a message indicating that there is not enough free space to hold items in the iTunes library, which indicates that I need about 43 GB.

  I tried to take as much data on my laptop thinking it would make more space available to my iTunes library which is held on my laptop.

  I had a problem some time with the storage of data files and program files. I divide the hard drive and I have a Macintosh HD 2, but also a main drive of the HD. I find that I have an iTunes library in two HD players, so I think I have a duplicate library.

  My iTunes app shows that I have a size of music library of-33,40 GB containing elements of 6940. My iPod touch has 6920 songs and 33 videos, 15 photos, 14 applications. The ability of the iPod touch is 56.4 GB, with 2.8 GB available.

  If the problem is the duplication of library, can I remove in double track of the HD2, and how to change tp parameters to stop duplication.

  Duplication of audio content seems to be a concern for you. If you have a desktop Mac, open iTunes/library/display the duplicate items. You can view and edit tracks easily.

  If you do not have a Mac desktop computer, the question is a bit tricky; There is no way to detect mp3 duplicates except manually.

  The good news is that the majority of your data bloat is likely to be in the 33 videos. I could most of the videos of archives and see what happens. (I have banned all THE videos of my iPod Touch and I couldn't believe how much I got space).

• problem syncing from WMP, sync my music files of phone with wmp, that I got a long list files that can not be in sync due to an error message

  sync music from my phone files with wmp, I got a long list of files that cannot be the result of a sync error message, how can I resolve this issue? Thank you
  I tried to by checking the format of files and those who are on mp3

  original title: problem syncing from wmp

  You need Samsung Kies to transfer into the memory of the Galaxy. Its free on the site of Samsung.

  See you soon,.
  Jerry

• Problem of indexing with Google Drive sync folder

  Indexing is working in all areas on my Windows 7 computer, except for my folder of Google Sync Drive.  I have already ruled out a problem with google reader.  No there.  Seems to be an indexing problem associated with this folder.  Any suggestions to fix this problem of indexing?

  Hello

  Welcome to the Microsoft Community Forums. I understand that you are facing problem of indexing with Google Sync Drive folder.

  You did changes to the computer before the show?

  I suggest the link and follow the steps in troubleshooting.

  Improve Windows searches using the index: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Refer to how to solve problems with search and indexing?

  If the problem persists after you perform the steps in troubleshooting from the link above and if you have problem in Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Impossible to change my printer from offline mode online

  Original title: get my printer online

  My printer has suddenly gone 'offline' and I can't do it online.  I ran the installer for my home network on it again, and he says it connected successfully, but it is always showing that it is in offline mode.  What should I do?

  Tahnya, salvation

  Thanks for posting your question in the community of Microsoft Windows. I understand that you have printer problem be disconnected. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the brand and model of the printer?

  2. you receive an error code or message?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the steps below and the links to verify the question:

  Replace a printer offline online mode:

  To resolve this problem, you need to change your printer settings of the offline online.

  a. open the start menu and click on the "devices and printers". This will open a window with a list of the printers currently installed on your computer.

  b. double-click the icon of the printer that you want to change online. The status of the printer appears in the form "printer: Ready" or "printer: offline.".

  c. click on "printer: offline" and the menu of the printer. Click on "Printer" in the menu bar and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  For reference:

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• How can I sync lightning with the iphone calendar?

  How can I sync lightning with the iphone calendar? I saw online that I need to use a google calendar? I added google calendar as they described, but I have no idea where from here

  To synchronize with the iPhone (also known as iCalendar) schedule you must use a calendar based on a cloud. If you already have the lightning, install the addon Google provider and Setup Google Calendar. If you have already done so, go to settings on your iPhone. In the e-mail box, Contacts and calendars, add your Google account and turn on the calendar. This will synchronize your Google Calendar with the iPhone.

• Satellite A500/026: problems in streaming/watch online videos

  Hello

  I didn't know where to ask for help, so I thought start id here since I just bought my Toshiba A500/026

  basically im having problem watching/streaming videos online. regardless of the source of the video, youtube, megavideo, veoh. the problem is that I have to wait as the entire video to load and then it starts to play. I can't look at it that it broadcasts.

  It don't tell me his load, it shows just a black screen and then all of a sudden it goes to show that the bar is full and video starts, now it is on short vids because it does not take long, but for movies, it fails generally as they take too much time to load the site will usually come with a mistake.

  Now Ive got to look on the web and I can't find this problem else where, ive checked that I have the last abode flash installed and driver debugging. usually, I use firefox, but im getting the same problem on IE.

  any help would be approeciated.

  Thanks in advance.

  Hello

  Maybe you installed a few 3rd party applications that affect the streaming
  Mate sorry but I have no idea why you can not watch the movie, while streaming is running.

  Have you installed codecs?
  Maybe you should do that I m using the K - Lite Codec Pack.
  Try to install it and then check it again.

• problem of password with former iCloud account Apple

  My wife's iPad has suddenly developed the following fault.

  A box with "connect to iCloud / enter the password Apple ID for"old account"appears every time." The problem is that the Apple account he mentions has been disabled or cancelled a long time ago [email address doesn't even exist now] so I can't enter or reset the password.  I looked on the forum and there are problems that closely resemble this but they say to go to the settings, but I can't because the Tin just appearing! I also re started several times, but the box until I can try anything.

  I sync ipad with iTunes and it is currently updating the software as is currently ios 7.0.3, however, this update takes a long time to download. Could be the problem?

  I did contact the Apple support line, but because I live in Spain their system is in Spanish which I am not competent enough to understand.  I tried to open a session as long as UK, but their call back is only a UK number.

  I hope that above makes some sense, and someone can help!

  Thank you very much.

  Response to my question above, I found the answer on youtube and incredibly, the answer is to change the date on the ipad [you must move fast to click on the buttons to the right until the box keeps popping up again]. It was as simple as that!

• Problem syncing of Contacts Exchange on 5.0.2

  First of all, I am a true beginner on Android, my motorcycle G 2014 is my first camera (I am a user of Palm since PalmIII and still using a PalmOne Treo 650!) for two weeks!

  Unfortunately, I accepted and installed the OTA Lollipop because I read on it is better 'system restore' and I had problems with the backup restore on an old P700 LG Google what a friend of mine gave me for a quick test before buying the bike G!

  It was my worst decision ever!

  The main problem is with my Exchange account contacts: it looks like the changes made on the phone are not Sync to Exchange.

  I really, really would like to go back to stock firmware (and I'll probably do, I am a student for this on the xda forum).

  Is anyone having problems sync'ing contact with Exchange? Our server is Exchange 2010...

  Ciao

  Giangi

  I can tell you that the cert self-signed compared to a real is not the problem. Who manages SSL encryption only and have no effect with contact sync - if it affects the synchronization of contact, nothing must synchronize.

  Since you have proven that contact sync works with a different exchange account, then something is wrong with the one account. Either:

  1. the account has a corruption and remove and re-add set

  2 lollipop and your version of Exchange do not play well together.

  Remove and add must answer the question.

  Keep us informed.

• Problem connecting wirelessly with Windows XP

  I broke out an old computer and was about 6 years old, updates to do. now that those who are in fact, can't the Wi - Fi to connect to save my life. I messed around online looking for a solution and have yet to find one. It seems that my problem has to with Windows wireless zero configuration.

  When I try to run the command sc query wzcscv I get this response:

  enumqueryservicesstatus:OpenService [sc] failed 1060:

  the specified service does not exist as an installed service.

  Any ideas?

  Assuming that you have spelled correctly when you ran the SC Query command (wzcsVC no wzcsCV), see http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/wireless-zero-configuration-service-not-installed/5d798c92-58db-4567-94c4-7c5c0a16becd

• Sync Blackberry with Outlook 2007 on Vista

  Hello. A brief introduction before my question. Recently, I tried Outlook to XP on my computer which uses Vista and I was not able to sync Outlook with my Blackberry curve calendar. I looked at Outlook 2007 and it is certified for use on Vista, so I expect that my blackberry should synchronize with outlook. My question is; has anyone who uses the OS Vista and Outlook 2007 has sync issues? Thank you

  HELO papabear72,

  Thanks for posting on the Microsoft answers Forum.

  I checked several Forums Blackberry and Outlook forums and you should be able to sync without problem.
  You will need to install Blackberry Desktop manager and synchronization with Outlook 2007. I saw where it syncs with Outlook 2010 beta.

  There may be some problems for some people with the Outlook calendar.
  You can check the forum Blackberry here or by mail to the Outlook forum listed above.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Crack speakers and buzz only with online video. In charge of the music and sound of the DVD fine

  I have a HP 15-r011dx laptop with windows 8.1 when on youtube or videos CNN, the speakers carack and pop. The ads CNN play before the story are very good as a DVD or my music loaded. I relly don't want to reinstall. I've had the computer for 3 weeks and I don't know if she was there from the beginning. I have updated all of HP, including the BIOS and tried another browser and adjusted the volume levels. Windows has made updates.

  Hello

  I have some other ideas, but it becomes more an environmental issue. Something (I couldn't say what) is causing interference with the audio. As this occurs only with online video/music and not anything ran computer laptop or DVD directly, this indicates that it would be something to do with the Internet.

  There might be questions about Internet bad signals via wireless or bad connections to Web sites. You have problems with streaming?

  You can also try to connect to your network with an Ethernet cable, to test. The question is perhaps more wireless streaming. Again, this could indicate some sort of interference.
  You can also test your router with the nearby. If you notice the problem disappears in some places but is apparent or worse in others. Check to see what's around, other devices may cause the buzz.

  Have you noticed problems in streaming video and audio on other capable network devices (iPhone, Desktop, etc.).

  The last possibility, again it goes back to poor/bad Internet could be the router itself. If it is older, then it might 'go. '

  I know nothing of the above are direct troubleshooting suggestions for the laptop, but two doing exactly the same thing is very rare. More often then not it is and indication that "something else" happening. The idea and the tests above could help determine what exactly will.

  I would like to know how it all happens.
  Thank you.

• BlackBerry software Z10 does not sync contacts with link BB

  I have a problem to sync contacts with my Z10 and Outlook (MS13); other messages say they have talked to support and walked through various errors to fix - please contact me!

  You should contact your wireless service provider and ask them to you degrades to the BlackBerry.  BlackBerry will not communicate with or through this forum.  It is a peer to peer forum as stated at the top of this screen under the "Welcome!"