Problem syncing Bluetooth with headset Samsung level U

Similar Questions

• Palm TX - sync Bluetooth with Windows 8

  I just bought a HP Envy 6 computer laptop with Windows 8 installed... only to find out that I can't use traditional crib with my Palm TX handheld sync.  I now use Bluetooth for HotSync operations.  I installed a Bluetooth adapter on HP laptop and set up the Bluetooth on the Palm TX handheld and everything looks like it's working in a perspective of Bluetooth.  However, when you try to use the HotSync of Palm... I get the error message "Cannot start the HotSync operation because the port is currently in use by another application".  I tried to configure serial ports Bluetooth on laptop with HotSync Manager, but that does not work either.

  Any suggestions?

  The TX can also sync via wifi, or you can use the Aceeca drivers to return to a simple connection of the USB cable.

  See the thread at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop are here".

  WyreNut

• Satellite P200-having problems of Bluetooth with USB BT dongle

  I have a P200-1EE running Vista, with all current updates.
  I deleted by mistake my Belkin Mini Bluetooth dongle without disassembling.

  Since then, although I can always send requests printing for my C5380, and it prints no problem, I am now an error message saying that the BTTray service will not start.
  I tried in vain to connect my Galaxy S mobile to the computer, and I wonder if this is the reason for this?

  What I need to download the Toshiba web site to repair this?

  > I have the disk installation for the laptop, if this repairs a damaged installation or he only moved from scratch?
  The recovery disk would fix the laptop back to factory settings, that means that your disk should be formatted and all partitions will begin again.

  To be honest I have not quite sure what's wrong with the external BT dongle, but the fact is it worked until you remove the dongle before canceling the service m

  Usually, this shouldn't be a big problem, but of course, the system has been confusing upward.
  You can try together the BONES date back to the time point may start to help this issue allows you to see, but recover disk should be the last option

• Problem installing Bluetooth with Satellite C875 - 136 PSCBCE

  Satellite C875-136 PSCBCE-01J002FR

  Hello

  I have a problem with the installation of the Bluetooth driver.

  I tried to install the driver bluetooth on Windows 7 x 64 but the freezing of the "driver installation" installation in Toshiba Bluetooth monitor

  I have installed Realtek WLan, battery Bluetooth Realtek and after the Toshiba Bluetooth monitor.

  Do you know how to solve this problem?

  I tried also with the Toshiba Bluetooth monitor v9.

  Installed files:
  http://Support1.toshiba-tro.de/Tedd-...0510093258.zip
  http://Support1.toshiba-tro.de/Tedd-...0510084139.zip
  http://Support1.toshiba-tro.de/Tedd-...0914172315.zip

  Hello

  The point is that you have installed the BT tools and software in disorder

  To get the BT working, you need to first install the Realtek Wireless LAN Driver then the
  Driver Realtek Bluetooth package filter then battery Toshiba BT
  The reason is that mobile use a WLan / BT combo card.

  The application of the monitor BT transforms the Bluetooth module power in conjunction with the Bluetooth stack.
  If its not really necessary get the BT working.

  Here you can find the BT portal, including the BT stack!
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba

• Satellite A100-147: problem of Bluetooth with BT dongle for mobile devices

  Hi guys, take it easy because this is my 1st post.

  I see there are some problems with BT and yes I am here with problems too!
  I recently had to reinstall XP PRO due to a virus, I ve installed all my drivers and even tried the recommended download links but nothing.
  When I load a BT2stack (tried different install x 64 etc.) installation driver, it came with small BT symbol in the taskbar, but when I clicked to toggle the box was just 'grey' and cannot be enabled.

  I noticed the code BW on the underside of my lappy is slightly different, but the a, just do not know if it s compatible with its location in the code.

  Code ends with 15WBT/DS2/LM/W... This seems ok or am I Bluetooth less!

  Whatever it is, the strange thing is I ve it works ok in the past by a BT toggle was having taken in the usb port, no probs in the past using this with my cell phone, but on the purchase of a new (old we had stood on) one mini disc 'pilot', it came with comes up with "E:\ is not accessible" and my disc drive is ok! weird but my 1st rocking didn't come with a disk and the other the box "found the new device" came it was straight forward.

  Axious even now I need this facility to work.

  Please, if anyone has a simple step-by-step tutorial for me to follow then that would be great. I m obviously missing something, but all leads come to a dying.

  see you soon... pete!

  PS. do not operate my FN + F8 but F1 etc seem to just put me on another page on this site?

  I confirm the information published by Blue2S.
  Satellite A100-147 was NOT equipped with the Bluetooth module!

  So you can not activate because there is NO BT!

• Problem connecting Bluetooth with Windows Mobile Device Center

  Hello

  I have and HTC Snap with WM 6.1 I want to connect to my Satellite P500 running Windows 7 to be able to move the files by using Windows Mobile Device Center.

  I know that this device can talk to this laptop via bluetooth, because there are some utilities bluetooth Toshiba that I can use to get a connection.

  However, even if the Toshiba utility recognizes my bluetooth device, but WMDC is not. WMDC recognises my device when it is connected with a USB cable.

  I don't know about the drvupdate-amd64 download which I think is necessary with WMDC but when I run what it looks like all it does is try to install a device driver for a device that is 'unknown '. I get a message at the end that driver could not be installed.

  I have run out of ideas on how to get these things to work. Someone at - it a similar experience?

  Could this be a problem of COM port? My Bluetooth device to 40 com affected Toshiba stack I don't see a COM 40 in the WMDC, just a port identified as "Bluetooth" settings

  Post edited by: t5247rb

  Hello

  This page of Toshiba Bluetooth may be able to help you;
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Here are very interesting HowTo documents;
  In your case I recommend that you check the docs:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.

  and

  + How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone +.

  Welcome them

• problems syncing multifunction with PCI-6229

  Hi, I use PCI-6229 and LabVIEW 8.0 for synchronized of the thermocouples and voltage measurements. The diagram is attached here. Here are my questions:

  (1) with the analog inputs of TC is ranked very first and followed with inputs analog voltage, as shown in the diagram, it works fine. But once the tension AIs are placed first and followed with AIs for thermocouples, thermocouple reading makes no sense, for example telling 25 deg C, the program shows strong fluctuating temperature 10-80 deg C.

  (2) the delay time using DAQmx Trigger, here I put the Start.Delay = 2, Start.DelayUnits = ticks. And sampling rate = 1000 Hz for sample clock VI. Then, is equal to 2 X (1/1000 second) delay time = 2ms? If no deadline is set, which is the time between the trigger signal and actural reading? Will it be the time device resolution 50 ns?

  All entries would be very appreciated.

  

  Hi Matt11,

  (1) the order that you specify strings in your task will affect the order of scanning.  In other words, when you add the channels voltage before channels of temperature, the material can enjoy the tension or s channels followed by the string (s) temperature.  Since the 6229 is multiplexed, it comes to each channel sequentially switching in a single ADC.  In your case, it seems that the tension on the ADC to measure voltage not had time to resolve completely prior to taking the measure of temperature.  We refer to this sometimes as ghosts in extreme cases where the value measured on channel b mimics the tension on the channel.

  I think that you have found that you can get this by adding the TC task first.  You could probably also get the same result by allowing more break-in between channels on your scan list.  You can set the time between the channels with a Timing DAQmx property node (you can set the property is the clock frequency convert, which is the opposite of a waiting time).  For slow sampling rates, sets DAQmx convert a default clock rate up to a minimum of 1/14 US (on the x 622).  If your overall sample rate is less than 1/14 us (about 71 kHz) then you should have room to lower the clock rate to convert more of this if you wish to allow more time to settle between the channels.

  I'm a little surprised that you see errors because of it (generally, the problem comes from a signal source of high imepdance measure or when sampling at higher rates), but then again, the temperature measurement would be very sensitive to small voltage fluctuations since you deal with thermocouple voltages at room temperature.  Given the order of scanning affects your measure the problem is almost certainly introduced leaving not enough time for the ADC to settle after reading your string tension.

  (2) ticks means actually timebase tick rather than the graduations to sample.  The minimum is always 2, but this match 2 graduations of 20 MHz (100 ns) time base from which the sample clock (unless you choose otherwise or specify a sampling rate less than 20 MHz / 2 ^ 32), instead of 2 graduations of the 1 kHz sample clock (2 ms).  In fact the trigger is probably performed asynchronously at the base of your time, if you are anywhere between the graduations of 1-2 the basis of delay time (50-100 ns) according to the relative phase of the trigger to the time base.  If no time limit is set, the default value according to me is still 2 ticks which is the minimum that allows hardware (you can check on your own by reading the property node if you wish).

  These points should be compatible between different driver versions, with the exception that DAQmx chose by default convert rate differently in earlier versions of 7.4.  Select the conversion rate is a compromise between the settling of deadlines and the channels are sampled how "simultaneously" on the MULTIPLEXED Board.  The final result in point 7.4 of DAQmx was a compromise apparently arbitrary add 10 US for the minimum conversion period and use this as the maximum by default between the channels.  The user can of course always set the clock to convert to all what best fits their application (in your case, you might want to allow a settlement more between each channel).

  Best regards

• Problem syncing offline with online

  My office has been... How can I say this? Under the weather for a few weeks, and as is the case, my story offline on it project are all obsolete with my online projects (which I worked on my laptop using).

  However, last week I got my desktop back, and now I have another problem. I can't get the offline desktop application to synchronize with the online App basically I sat there for 15 minutes with "putting online, please wait...". "sitting on my screen, but nothing happened. So I uninstalled the story and then installed again, but to my surprise, that all my documents offline have been always there for a reason, and it won't always go online.

  Basically, I'm wanting to know how to get this thing to synchronize. Any help is welcome.

  OK, then try this:

  1. go in run promptly:

  Press windows + r to get to it fast

  2 type %appdata%\microsoft\windows\sendto on the command prompt, and then press on enter

  3. This should open the appdata folder

  4 find the folder named com.adobe.AdobeStory.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 here and delete it.

  

• Windows 7 problem of bluetooth connectivity with bluetooth for Skype-ing headsets?

  I've read similar questions on the form, and unfortunately I could not find an answer to my question. Starting from 01/12/09, I upgraded to windows 7 home edition with minor compatibility issues (negligible). But, before installing windows 7 I was able to use my headset bluetooth with Skype. Now, sype does not recognize this connection between pc and my bluetooth headset. Ironically enough my pc has allowed for the configuration of my listener. my headset is appointed to be my helmet without wireless/bluetooth for use with Skype or any other program from my PC. In addition, my PC is allowing and acknowledging the connectivity between my PC and the bluetooth headset but not Skype. I tried to reconfigure Skype, but have failed to prove any changes to the default settings. your help is greatly appreciated.

  Windows Update has nothing to do with the upgrade of Windows or your problem. Contact the Skype Support or try to repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  PS: Is Skype in Win7/IE8 still supported? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet h470: Officejet h470 bluetooth with lozenges of galaxy Samsung... asking to enter a PIN.

  Under settings/bluetooth on my Samsung Galaxy tablet, it detects the Officejet h470, but it asks me to enter a PIN. I have a HP bluetooth supplied with the printer, but I can't find a PIN written on this subject? He also says that I have to type the pin code on the printer, it is impossible to do!

  I have searched this forum but could not find anyone with the same problem.

  Anyone know how to bypass this?

  Hello

  Enter the default PIN Code which is '0000' (four zeros).

  If denied that reset the bluettoth settings as follows and then try again:

  1. Press and hold the power button.
  2. While pressing the Power button, press the button cancel 4 times, and then press the button repeat 6 times.
  3. Release the Power button.

  Now try to connect to the Bluettoth device using the value by default "0000" code to access again.

  Kind regards

  Shlomi

• problem syncing from WMP, sync my music files of phone with wmp, that I got a long list files that can not be in sync due to an error message

  sync music from my phone files with wmp, I got a long list of files that cannot be the result of a sync error message, how can I resolve this issue? Thank you
  I tried to by checking the format of files and those who are on mp3

  original title: problem syncing from wmp

  You need Samsung Kies to transfer into the memory of the Galaxy. Its free on the site of Samsung.

  See you soon,.
  Jerry

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• problem syncing iPod touch with iTunes

  Hi, I had a problem syncing my iPod touch with iTunes. I get a message indicating that there is not enough free space to hold items in the iTunes library, which indicates that I need about 43 GB.

  I tried to take as much data on my laptop thinking it would make more space available to my iTunes library which is held on my laptop.

  I had a problem some time with the storage of data files and program files. I divide the hard drive and I have a Macintosh HD 2, but also a main drive of the HD. I find that I have an iTunes library in two HD players, so I think I have a duplicate library.

  My iTunes app shows that I have a size of music library of-33,40 GB containing elements of 6940. My iPod touch has 6920 songs and 33 videos, 15 photos, 14 applications. The ability of the iPod touch is 56.4 GB, with 2.8 GB available.

  If the problem is the duplication of library, can I remove in double track of the HD2, and how to change tp parameters to stop duplication.

  Duplication of audio content seems to be a concern for you. If you have a desktop Mac, open iTunes/library/display the duplicate items. You can view and edit tracks easily.

  If you do not have a Mac desktop computer, the question is a bit tricky; There is no way to detect mp3 duplicates except manually.

  The good news is that the majority of your data bloat is likely to be in the 33 videos. I could most of the videos of archives and see what happens. (I have banned all THE videos of my iPod Touch and I couldn't believe how much I got space).

• How can I sync iMessages with Samsung Galaxy phone?

  How can I sync iMessages with Samsung Galaxy phone?

  You do not have. iMessage is a messaging owner of Apple platform.

• problem syncing music Samsung

  I am trying to sync my stratoshpere samsung windows music player11 w/Vista x 64 but wmp does not recognize. ask me to connect a device

  I'm going along in the circles-HELP!

  You sync with WMP before using this phone?

  Moreover, this question should be posted in the forum Windows Phone Devices, synchronization and update.  Note the drop-down menus:

  http://answers.Microsoft.com/en-us/WinPhone/Forum/Sync?tab=unanswered

  Here are the instructions on synchronizing with the Samsung reality - should be the same

  http://www.Verizon-phones.org/Verizon-Samsung-reality-tricks-transfer-MP3-files.html

  Uninstall the Windows driver for the phone

  Reboot and let windows reload the driver