Problem to create the new field of 12 c

Similar Questions

• Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• How to use the model instead of RP pspice to create the new component?

  Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.

  Fouda, salvation

  I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.

  If all goes well, you should start to see the results of the component. I hope this helps.

  Best regards

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• InDesign CC closes unexpectedly when you create the new document

  Hi, my CC Indesign closes unexpectedly whenever I try to create a new document.

  Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves.
  

  I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work.

  • The InDesign file in the cache folder, delete.
  • In the preferences/Adobe InDesign / Version 11.0/en_US (or any language folder you see there), locate the InDesign Defaults file and place it on your desktop (this way you can always copy it back if necessary). If there is a file, InDesign SavedData offers also the office.
  • Restart InDesign after doing that, fingers crossed it will launch.
  • If you are satisfied with the result and don't need your InDesign preferences previous folder (InDesign Defaults), then delete the two files to the desktop computer. I usually keep a copy of them just in case ;-) But 99% of the time that I do not put them back, as clearing caches and prefs seems very often cure the problems.

• How to create the new record of web service in the ADF?

  Hello, I use JDeveloper 11.1.2.3.0. I created a class and published as a web service. I created a web method like this:

     public void addNewRow(MyObject cob) 
  { 
  MyAppModule myAppModule = new MyAppModule(); 
  try { 
  ViewObjectImpl vo = myAppModule.getMyVewObject1(); 
  ================> vo object is now null 
  Row r = vo.createRow(); 
  r.setAttribute("Param1", cob.getParam1()); 
  r.setAttribute("Param2", cob.getParam2()); 
  vo.executeQuery(); getTransaction().commit(); 
  } 
  catch (Exception e) { e.printStackTrace(); } 
  }
  
  

  As I have written in the code, myAppModule.getMyVewObject1 () returns a null object. I do not understand why! AFAIK AppModule must initialize the object itself, when I call "getMyVewObject1()", but maybe I'm wrong, or maybe that's not the way it should be for the web methods. Has anyone ever have this problem? Any help would be much appreciated.

  You must use Configuration.createRootApplicationModule () to create the new instance of AM.

  Example: creating root Application Module Instance & #8211; Oracle ADF | Techiecook & #039; s Nook

  Also, the methods in your AM can be automatically exposed as service web soap:

  Andrejus Baranovskis blog: Web Service Interface for molten Oracle 11 g ADF BC Application Module

  And note that your code has other issues, for example:

  vo.createRow () will not automatically add this line to the View object.

  vo.executeQuery () is not necessary...

  Dario

• Access denied to create the new folder

  Hi friends,

  When I tried to create a new folder under shared folders in the catalog as a weblogic user, I couldn't not an option to create the new folder. But I have this option in the my folders area.

  I'm not sure why the option create a folder is not enabled for the user of weblogic in the shared folders.

  IM on OBIEE 11.1.1.7 and to work around the problem I referred to the link below

  https://forums.Oracle.com/thread/2520389

  I followed the steps mentioned in the link above, but not successful yet facing the same problem of privilege of folder under shared folders on the weblogic user.

  Please suggest me your approach to solve this problem.

  Thank you

  Kind regards

  Saro

  Make the PS service, using catalog manager defined the BI Administrator role permissions

  then check it

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )
  

• CS6 Illiustrator crashes when you create the new file

  Hello.

  I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working.

  Windows 7 Hompe premium x 64

  processor i3 4x2.93

  RAM: 4 GB

  network with printers

  

  error reaport

  

  Hi Philippe,.

  We are really sorry for all the inconveniences that made you.

  Try the following steps to check the issue.

  1 try resetting preferences

  Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings.

  2. If this help not try to remove all printers from the system one & check.

  3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file.

  At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below:

  http://helpx.Adobe.com/contact/

  Thank you

  Florian

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• Problem to create the account

  Hello
  
  I have the problem to create the account in Administration-> Admin-> User Admin Applets. According to the documents I have to add UserAccounts = true in the General Configuration link in the pane < servername > options. But after configuring in Server Admin and server restart, I couldn't have the option ... Predefined accounts available under the Security of the user Admin applet page link. So I could not add the new account.
  
  Let me know how I can configure the same and add the new account.
  
  
  Thank you.

  Hello

  The configuration you need to add UseAccounts = true and not UserAccounts = true. Change in the config.cfg file, restart the content server and then create accounts.

  Thank you
  Srinath

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.