Problem to start Windows 7 (file \boot\bcd; status 0xc0000098)

Similar Questions

• Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)

  HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f

  How can I solve it please, I have windows won start t all hekp would be much appreciated.

  Kind regards

  Yvouille

  Hello

  The following assumes that you are running Windows 7.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

  Original title: 0x000014c File: \Boot\BCD

  I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

  Hi Maddy,

  This problem may occur if the Windows startup files are damaged or missing.

  If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

  If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

  If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

  Hope the helps of information.

• FILE: \BOOT \BCD - status 0xc000000f

  OK, Vista running and get the error on the startup file: \boot \BCD with status 0xc000000f

  I know not how to solve this problem using the diskette provided by dell and I see a lot of people have the same problem.

  Microsoft gave instructions on how to solve this problem, but they did not address the cause,

  Everything works fine until there is an another update of Vista then it does again?

  Why is this and how can it be solved for good?

  answered in other threads

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1920f1c8-A1D3-416c-B03B-ca998f6cec7a
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/3df8c662-2076-4d1a-8E3E-7fbabc800445 Rob - bicycle - Mark Twain said it is good.

• File: \Boot\BCD status: 0xc0000034

  Hi, I can't seem to go beyond the Info: information does not appear in the data Configuration of Boot of Windows file.

  I would like to reformat my laptop when it was purchased, but can't seem to go beyond the above, and he tells me "Insert your Windows Setup disk and restart your computer" etc... but I did not receive one when buying my laptop from Dell 1558.

  Please help someone if you can.

  Thank you

  kamalt

  Dear Philippe,

  Thanks for the quick response, much appreciated.  Unfortunately, I followed your instructions and I always come back with the same question. :-(  Any help is appreciated.

  Kamalt

• FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error

  I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.

  Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.
  I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable.  Tried the disc start recovery and orders bootrec quick functions.
  Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?

  Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098.

  original title: PSHED.dll

  Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098 Info: windows failed to load because a required file is missing or corrupt. and I lost my original disc to repair.

  I believe that this has happened after I tried to update my windows update system.

  Hello

  You can run file system analysis checker and see if the problem still persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows could not start. Status: 0xc000225. File: \Boot\BCD

  Pavilion dv7 - 6187cl Entertainment PC

  Hello

  The following assumes that you are using Windows 7

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the CD into the laptop and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• WINDOWS does not start \EFI\MICROSOFT\BOOT\BCD status 0 x 0000185

  I just got a new laptop and I love it, but I went to restart it and the samsung logo stay up, and finally, it throws an error saying

  Windows doesn't load due to hardware or software upgrade recent...
  file \EFI\MICROSOFT\BOOT\BCD
  status 0c 0000185
  Info configuration of your pc startup data is missing or contains errors
  the computer tells me to insert the windows disc 8
  I don't have a windows disc 8, I got the laptop a month ago but it is pre-loaded with windows 8... help a brother out!

  Curiously, I tried all the patches when I got this error efi unawares. I have a dual boot using win 7 as my first and win 10 on another drive.

  I downloaded a Boot Manager after you saw that somehow the drive letter had changed when I decided to check the start state. I don't have this problem before the last update.

  It changed back and everything was fine.

• Bootmgr problem - cannot start windows

  Hello.

  Please help me with my problem starting. I can't access my computer, windows does not start.
  I am running windows 7.

  At the start of my laptop, I get the message "bootmgr is compressed - press ctrl alt del to restart."

  I searched the problem around the internet, and it seems to be because of people compressing their hard disk to save space and cancelling to half way through.
  I did not cela I played with a program Loader SLIC and installed by mistake, now I can't start windows.

  I tried to use my DVD of windows 7 to fix the boot, but it did not work.
  I also tried to restore but I have not set restore points.

  I tried to use some guest bootmgr reset procedures that were not working.

  Can I somehow get a bootmgr backup and restore?

  Help, please
  Thank you

  Hello

  I guess your boot manager's injury. Probably by installing the SLIC Loader program
  My idea was simple; start from the Windows 7 disc and then try to enter the console command.
  There, you can use the FIXMBR command

  But if it will not help you should then take your Windows disk or the Toshiba recovery disc and needs to be reinstalled the entire system again.

• Cannot start Windows on first boot (works after restart)

  I recently removed the dust in the housing using a bellows, at the end of which I had unplugged and removed by the drive hard and video card. After reinserting the components and start the computer, I heard a continuous beep sound while the screen remains dark. After the reopening of the case I noticed that I forgot to plug a wire into the video card (PCI I think) I plugged. After you start the computer again once it wasn't a beep more and I got the video. However, Windows does not load on first boot more. He will go as far that the loading screen of the bar after which I get a 'no signal' and the computer restarts. I will get a screen with the message that Windows cannot start, probably due to software or change of material and a number of options. When I choose to start windows normally it will mostly start normally (sometimes I need to repeat the process) and I can use the computer normally (I use it now). A reboot, the computer has been shutdown very slowly and later wouldn't pass the default splash screen, but it has not reoccured.
  Another small issue, I'll have is a regular of the screen flicker.

  I used the drive control to the start of several times. I tried to address this problem by starting the computer with the Vista installation disc and select Repair, but I was not allowed to fix the menu says there where no problem. I reinstalled Windows (and I can't be fully updated all the drivers again, hance perhaps the flicker of the screen?), but to no avail. The closest thing I've met on the internet who resembled my problem was this: http://answers.yahoo.com/question/index?qid=1006011905618 so, I replaced the BIOS battery, which once again changed nothing (BIOS holds settings BTW). In fact, once I'm on Windows I would seem to have a computer that works very well. The issue doesn't bother me so much if I wasn't worried, that it could get worse.

  I have Vista 32 bit, Intel E6750 CPU, card mother Gigabyte GA-P35-DS3, Geforce 8800 GTS 320 MB video card, 2 GB of RAM, Samsung 400 GB HD Vista has been entirely updated (including SP2).

  Hi CeCoRM,

  I suggest physically wipe you the hard drive again by blowing air earlier could have pushed the dust particles away on the inside.

  I would recommend also you post your question in the TechNet forums for assistance.

  Hope the helps of information.

• to start windows in clean boot and tried to launch interactive help - but says he can't

  system becomes all kinds of errors, the system disk error 7004 - 51b 9 - almost every day - don't wake up stand-by - extremely slow performance - advised to start in the State of clean boot and when I try to do with the interactive help - it says it can't run it - what can I do?

  You must get other advice.  I said nothing about "clean boot".  If you want to try a clean boot, see:
  "How to configure Windows XP to start in a"clean boot"State
    <>http://support.Microsoft.com/kb/310353 >
  If she does disk check every time you start and this was compounded, I doubt this will help.

  If it's sleep mode, then you wake up usually mode standby by pressing the power button momentarily.  If you want to wake you up by moving the mouse, you may be able to choose a screen saver that turns off your monitor but not your computer.  "Night light" is a semi stop and controlled by the power settings in the control panel.

  Good luck
  JW

• Problems to start Windows XP. I get "STOP: c0000218 {a resgistry file failure}}" error message.

  Original title: I'm having a problem when I start my xp.__It blue screen Watch window and wrote as details below:

  I'm having a problem when I start my Windows xp.
  It shows the blue screen and was written like this:

  {STOP: c0000218 {a resgistry file failure}}
  The registry cannot load the hive (file):
  \systemRoot\ststem32\config\software
  or its log or alternation.
  It is damaged, missing, or not accessible in writing.
  Beginning physical memory dump
  total physical memory dump.
  For more assistance, contact your system administrator or technical support group.

  Do you currently or have you ever had products Norton or Symantec installed and if so, which version?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Problems to start Windows Vista / slow route and the screen is very big

  Hello

  Last night, something happened and the power strip with all the strings of my computer was turned off. When I turned it on Windows took a long time to start. I tried several times to boot mode safe but it freezes when it loads the files "Windows". When I choose to start normally it takes about 30 minutes up to what the login screen appears, but the screen is large and disproportionate as if the resolution was too low. If I connect to try to change the resolution of my computer runs very slow and I can't do anything.

  I can not start safe mode and I tried to use the last good known Configuration, but my computer is blocked that do too. It freezes at the "loading windows files" with the white loading bar. The bar completely and then everything stops as if my computer is blocked. The only way he can start very slowly normally is, and then I can't do anything with it. For not to mention everything on the screen how big is. I checked the resolution with my monitors settings and it says its normal.

  At this point, I am completely lost and have no idea what could be the problem or what I need to do.

  My computer is a HP Pavilion Elite m9357 PC c.

  The monitor is an HP w2207h

  Any help would be greatly appreciated.

  Thank you!

  Hope

  Hello

  Power outages can damage the equipment.

  I suggest that you see if you can save your data > do reinstall a factory.

  If this does not solve your problems, then it points to a hardware problem.

  With a CV, you press F11 repeatedly at startup to start the recovery process to factory settings.

  See you soon.

• Error message - Windows files have been replaced by unrecognized to start Windows XP, files.

  Original title: unrecognized Windows files at startup.

  I recently installed XP Service Pack 3, which included the so-called "Power Shell". Since when I then boot up, I get a message box that Windows files have been replaced by unknown files. I gives me the opportunity to continue with these files not recognized or not. If I choose "Yes" to continue, the message warns me that continue with those unrecognized files could make Windows unstable. If I choose 'No', I received instruction to insert the correct CD and install the files. Problem is the only drive I have is the Operating System CD that came with my Dell Inspiron 530 s. The message then told me that it's not the correct CD.
  I thought about uninstalling Power Shell, but I get a message that it could lead to things like updates of IE and do not work. What should I do?

  The messge comes up saying that it is not the correct CD as Service Pack of the CD must match with the Service Pack installed on your computer. However, there was a similar question was asked here - http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/in-xp-getting-error-files-that-are-required-for/f7433993-e5c2-454c-8f23-ddd7fdb3630b

  Please refer to it. The solution may be the same as far as I KNOW.

  It can be useful :)