Problem upgrading controller 4402

Similar Questions

• problem upgrading to el capitan 10.11.2

  problem upgrading to el capitan 10.11.2

  the new update for el capitan jumped into the app store... after I clicked "update" it began to download the update '1.4 GB' after

  I had a massage to restart, but this massage is displayed when attempting to install on reboot

  "UPDATE OS X EL CAPITAN" could not be verified

  You can try updtaing again in the app store after the reboot

  I tried again and the same thing happened,

  so I downloaded the update by me free and I tried, but the same continues to come massage... Help, please?

  Try OS X El Capitan 10.11.2 Combo Update.

  https://support.Apple.com/kb/DL1850?viewlocale=en_AU&locale=en_AU

  Best.

• problem upgrading to Windows7 Windows XP Professionalge.

  Hello everyone and happy to be here. I have a problem upgrading to Windows7 in Windows XP Professional. I have a Dell E510 while upgrading to Windows 7, I have reached the installation window and my complete system each item listed with a check mark next to: (copy of Windows files), (gathering files, settings, programs), (extension of Windows files). reached 27% full. I get a massage from windows restarts now... The computer does not restart. He asks me to press any key to boot from the CD. Once it goes to that, a window pops up that says "Windows starts now." It is not to go further than that. I release the CD and turn off the computer. When I restart again, a window prompts you to say 'start from the old system or windows put in place. " If I press windows set up, it does nothing. When I press on the old system, it restarts in Windows XP, and then a window invites you to tell me 'the computer started on your old system. It would not be upgraded. Contact Microsoft. This is getting very frustrating. I installed the Windows 7 DVD on my other HP computer without problem. But when he asks me to press any key to reboot from dvd and you do. There is no that start the installation from the beginning. "Collection Windows files, them"start windows"and them it is he don't, don't go anywhere." Can't someone help please? Thank you and I appreciate the help.

  Do not touch the keyboard when you are prompted to "Press any key", sit and wait Windows to continue the installation. Also did you select the 'custom' and not the 'Upgrade' option at the beginnng of the installation process.

  J W Stuart: http://www.pagestart.com

• Problems upgrading to v12.0.1

  I'm getting several errors, try to upgrade v12.0.0 to v12.0.1 on Windows 8 x 64. The first error during the upgrade is the following: it

  It then restores. When I try to install the upgrade again, I get a different error message:

  

  I'll just try to restart and try again.

  Thanks for asking!

  This problem has a solution and could check you method?

  VMware Workstation 12 Pro Release Notes Re: problems upgrading to v12.0.1

  A workstation Pro 12 installation may fail with an error message on the privileges
  During installation, 12 Pro Workstation may issue the error message depending on whether the installation fails:

  "VMware authorization Service" service (VMAuthdService) failed to start. Make sure you have sufficient privileges to start system services.

  Workaround:

  1. Cancel the installation of workstation Pro 12.
  2. Remove all the files under the directory %TEMP% .
  3. Reboot the host.
  4. Install new Workstation 12 Pro.

• Upgrade of Cisco Wireless Controller 4402

  We have a 4402 WLAN controller with a bunch of AP in 6 locations. The software is installed on a Windows Server 2003 server - since our society must be in accordance with various compliance agencies, we are in the process of getting rid of all 2003 servers in our infrastructure as they will be supported are more early next year.

  I created a new server (2012 R2) and tried to install, but get the error that it is only supported on Server 2003 or Red Hat.

  Is there a way to get this installed on one different platform other than 2003?

  Thank you!

  Yes, you can keep the same equipment (WLCs and AP).

  I was just saying about upgradation WCS to the CNS / prime infrastructure

  NCC/WCS are just a management for wireless LAN controllers APs. so if you change the WCS to the CNS, then it will affect any service.

  Concerning

  Remember messages useful rates

• Old famous problem - AP LAP1142N cannot join the controller - 4402, please participate, we will make a good guide!

  Hello people,

  I'm sorry for bringing this debate again. I would not dare to ask this question, if I find someone is clear cut suggestion/solution or an overview giving a detailed step by step procedure. Just people suggest jumping through hoops as much as the reset of the AP or conversion to stand-alone mode and then back to LWAPP.

  Therefore, I have so many questions and hope that we can make a good guide that covers all possible problems.

  (1) AP originally ran a stand-alone image.  I started in so-called ROMMON or AP mode (ESC is the right key to start in this mode)

  I found a recovery image in its flash - c1140-rcvk9w8-mx. I did start it AP with him using the 'set' command and I see that it start to boot using this recovery image. That is the question. All the parameters of the AP matter? For example, when I run the command "set" of the PA, I see the following:

  AP: the value

  ?=

  DEFAULT_ROUTER = 10.0.0.1

  Default_router = 10.9.99.1

  ENABLE_BREAK = yes

  IP_ADDR = 10.0.0.1

  IP_AddR = 10.9.99.9

  MANUAL_BOOT = no

  NETMASK = 255.255.255.224

  NEW_IMAGE = yes

  PWR_INJECTOR_DETECT = 0016.c7fa. B394

  RELOAD_REASON = 9

  ROM_PERSISTENT_UTC = 1014941470

  TERMLINES = 0

  subnet mask = 255.255.255.0

  (2) how do something like "write erase" or even to recover the enable password while being in AP mode? Do I really need to do? What I see then makes me believe there is something with the AP (including SSH) configuration that prevents a join AP WLC.

  (3) the access point is turned on, connected to the switchport on the same VLAN L2 where WLC management interface. Then it starts and gets an IP address from the DHCP server located on another switch.

  * 00:00:08.695 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 00:00:08.705 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - AC_ADAPTOR (0000.0000.0000)

  * 00:00:09.629 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

  * 00:00:17.534 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 192.168.1.122, mask 255.255.255.0, hostname AP2

  Here's the question, why I see this on the console (pay attention to the line "transport input ssh")? It has nothing to do with an error for DTLS?

  * 12:44:21.034 Apr 12: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:44:31.000 Apr 12: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.141 peer_port: 5246

  * 12 Apr 12:44:55.000: DTLS_CLIENT_ERROR:... /DTLS/dtls_connection_db.c:1924 retransmission count Max reached!

  * 12:44:55.000 Apr 12: % DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 192.168.1.141 is reached.

  entry ssh transport

  ^

  Invalid entry % detected at ' ^' marker.

  (4) what I need to connect the PA-Manager controller interface to the network, or I can count on the AP the WLC find through its management interface. I've never worked with the 4400 series controllers. It all started with 5500 and they do not have the ap interface - manager.

  Cisco Guide says: "the management interface is also used for communications between access points and WLC layer two", so I assume that this is enough. Moreover, I can ping the AP of the WLC when connected to WLC via SSH and its management interface.

  (5) and finally, what is the problem with the discovery? That's what I see on the controller debugging capwap packages:

  Debugging (cisco Controller) > * spamReceiveTask: 12:53:52.253 Apr 12: <  start="" of="" capwap="" packet ="">>

  * spamReceiveTask: 12:53:52.253 Apr 12: control of CAPWAP mesg 192.168.1.122 Recd, Port 57046

  * spamReceiveTask: 12:53:52.253 Apr 12: 4, HLEN, Radio ID 0, WBID 1

  * spamReceiveTask: 12:53:52.253 Apr 12: Type of Msg: CAPWAP_DISCOVERY_REQUEST

  * spamReceiveTask: 12:53:52.253 Apr 12: Msg length: 29

  * spamReceiveTask: 12:53:52.253 Apr 12: Msg SeqNum: 0

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_DISCOVERY_TYPE, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: Type of discovery: CAPWAP_DISCOVERY_TYPE_UNKNOWN

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_WTP_FRAME_TUNNEL, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: the Tunnel Mode of frame WTP: NATIVE_FRAME_TUNNEL_MODE

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_WTP_MAC_TYPE, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: WTP Mac Type: SPLIT_MAC

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * spamReceiveTask: 12:53:52.253 Apr 12: identifier of the seller: 0 x 00409600

  * spamReceiveTask: 12:53:52.254 Apr 12:

  Discovery and how are we? L2 or L3?

  What about the rest of this thread is all over the place...:

  Can you confirm that the Interface of management and the Manager AP are both in the same vlan, same subnet and are configured with the same Port number?

  All these cases to 1 FPS and which port to connect has concerned me divide you the ports or something...

  The first provided newspapers imply that the AP could not reach at the AP Manager (but that the discovery of the Management Interface was very good)

  Newspapers second condition means that the AP never discovered a WLC at all (no attempt to join)...

  But then again, as Leo referenced, the area of Canada that I guess is a no - n... so maybe that was your problem original throughout and the 3600 join just because it is not compatible.

• Problem upgrading to 4K Advanced Format hard drive (Windows Update)

  I am running Windows 7 Professional 64 bit, on a Lenovo ThinkPad W500 laptop. I am trying to upgrade my Seagate 320 GB hard drive for Western Digital WD-Blue 1 TB. The new drive has 4K (Advanced Format) sectors, as opposed to the sectors of 512 bytes, which seems to be the cause of some problems with Windows. The operating system loads, however, Windows Update will not work, and various programs give strange guests.
  The old drive was cloned to the new using Acronis True Image WD Edition. Alignment has been checked using Acronis WD Align. I clone the old drive. cleaning Windows installation is not an option.
  Microsoft has this article for what seems to be my problem: http://support.microsoft.com/kb/982018. I have already run this file (before the cloning), but the problem remains.
  Online, I've read that it might help to install Intel RST 9.6 or later version. My Device Manager lists currently Intel ICH9M-E/M SATA AHCI Controller (under IDE ATA/ATAPI controllers); This is the version of the driver 8.9.2.1002. I tried updating the driver, but without success: I just got the message, "Windows has determined the software driver for your device is up-to-date.»
  Help is greatly appreciated. Thank you very much. I am running Windows 7 Professional 64 bit, on a Lenovo ThinkPad W500 laptop. I am trying to upgrade my Seagate 320 GB hard drive for Western Digital WD-Blue 1 TB. The new drive has 4K (Advanced Format) sectors, as opposed to the sectors of 512 bytes, which seems to be the cause of some problems with Windows. The operating system loads, however, Windows Update will not work, and various programs give strange guests.
  The old drive was cloned to the new using Acronis True Image WD Edition. Alignment has been checked using Acronis WD Align. I clone the old drive. cleaning Windows installation is not an option.
  Microsoft has this article for what seems to be my problem: http://support.microsoft.com/kb/982018. I have already run this file (before the cloning), but the problem remains.
  Online, I've read that it might help to install Intel RST 9.6 or later version. My Device Manager lists currently Intel ICH9M-E/M SATA AHCI Controller (under IDE ATA/ATAPI controllers); This is the version of the driver 8.9.2.1002. I tried updating the driver, but without success: I just got the message, "Windows has determined the software driver for your device is up-to-date.»
  Help is greatly appreciated. Thank you very much.
  I believe that the problem has been resolved, I downloaded Intel RST 9.6.0.1014. The latest version could not be installed on my machine and slightly older than more recent knocked out of my DVD player. Older than 9.6 had the problem with allowing a training of 4K, but 9.6 seems to have been appropriate.

• Problems upgrading to el capitan

  You want to upgrade to el capitan, but want no other experience ranging from Yosemite to El Capitan on an iMac 2010 mid... Yosemite works very well and won't change if they are problems lurking on their...

  I upgraded to El Capitan without any problem.

  That maybe these problems you are so afraid to have if you upgrade?

• 19.0.2 'problem upgrade '.

  I leave Firefox 'upgrade' 19.0.2 on my Windows 7 laptop today. It is even impossible to load a page. It is all display tabs without loaded content. Displaying an address or a search does nothing, the browser ignores just my request.

  There is nothing wrong with my laptop, I tried emptying my cache and disabling modules. It is literally a very bad problem with your browser. I expect a lot of people have the same problem; Maybe they don't all post complaints however.

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

• Problem upgrading the h8-1409 HP Envy video card problem

  Hello.

  I just bought this machine and it has a good processor and ram good, but it comes with a card missing video (HD7570).  I want to upgrade the video card at one of the best maps I have of my old machines (Gigabyte GTX 660 ti and an Evga GTS 250).  When I install one of these cards but, I get no video output.  I can hear the initialization of the system and the hard drive works, so everything seems fine here.

  This machine comes with a 460W power supply, which should be enough to run one of these cards, but no go.  In order to exclude food, I tried on a secondary market, OCZ 600W PSU, but got the same result.  Two cards work in my old machine, so I know that the cards are good.

  The specifications of the main Board are here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03132942

  As far as I know, it should work.  Is there something I'm missing?

  Thank you very much.

  Hello

  Only use one video card in your PC and make sure that it is installed in the PCI-E x 16 slot.

  Boot in the bios (ESC and F10) and go to security topics. Try each of the topics and search a secure Boot Configuration.  If it exists, then see if Secure Boot is disabled.  A poster said that secure boot disabling enabled the installed video card. I have not tried this on a HP active UEFI motherboard but I know that it isn't a problem with another mother UEFI card that I use.  Your mileage may vary.

• Dv6 6130sl: problem with controller

  Hi, I have a problem with my dv6 6130sl, especially with the controller network, controller of communications Simple PCI system management bus controller, ethernet controller and PCI devices.

  Can you help me solve this problem?

  Thank you

  You are the very welcome.

  You need this driver for the broadcom wireless card.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  The Intel driver interface I posted (for comms controller simple pci) must have worked.

  Try to install manually the driver for the device in pci controller simple comms by navigating to the folder of the driver that was created when you ran the file.

  The file will be located in C:\SWSetup\sp55100.  Make sure that the include subfolders is selected.

• Problem upgrading processor on HP Pavilion Dv6628us

  The product name and number:

  HP Pavilion DV6000 & DV6628us number

  Operating system installed:

  Windows 7 32 bit

  Error message:

  I'm upgraded intel core 2 duo processor 1.45 ghz to 2.4 ghz. When I do, my computer turns on then turns off and the fan runs very fast. I was wondering if it is same compatiable.

  All the changes made to your system before the problem occurred:

  Nope - just as I pass chips

  Say hello to new tycars.

  I have somehow missed this processor. Be sure to update the wire to leave wire in order to let the forum know how the process goes for you.

  Have a great day!

• Problems of controller XBOX 360 using Vista PC

  I bought an XBOX 360 Wireless Controller to my PC which is Vista 32. It worked at first and now it does not work... There is a lot of ppl with this problem with no will... Please help?

  cuzandlisa,
  I have not had this problem myself.  But you might want to look at the troubleshooting on the Xbox site.
  This page is especially for the Xbox to the PC controllers:
  http://support.Xbox.com/support/en/us/NXE/hardware/accessories/accessoriesforPC/ControllerforWindowsList.aspx

  Hope that gives the info you need.  FYI: My first thought would be to uninstall\reinstall the driver.  Also make sure that your PC is up to date with updates.

  Windows 7 was not my idea, but it still rocks! Soli Deo Gloria!

• Problems upgrading from vista to win7

  I have a Toshiba satellite p205 and I have the disc of windows 7, but when I go through the process, it does not work, so I downloaded win7 Upgrade Advisor and he says: I have all kinds of compatibility problems with drivers toshiba n such, he also says that I don't have the vista service pack (in which I don't have) so I kept installing updates from windows but the option to install SP1 never showed up. So I downloaded manually 440 mb SP1 on MS website, but it will fail to install due to an error. Can anyone help?

  NightFury,
  Try the following and let us know the result.

  Run the disk error checking
  Then run the System File Checker
  Will download and run the System Update tool
  Make sure to note one of these tools can display error messages.

  Will they all work fine and correct problems, and then run Windows Update.  After installing other updates, then try the manual installation for SP1.  It would also be useful to know what error you get when SP1 installs.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.