problem upgrading from 16.0.4 to 16.2.2 illustrator?
update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
CC updates: win (http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html)
updates CC 2014: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)
updates CC 2015: win (http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2015-updates-links-mac.html)
Tags: Adobe
Similar Questions
-
Problems upgrading from vista to win7
I have a Toshiba satellite p205 and I have the disc of windows 7, but when I go through the process, it does not work, so I downloaded win7 Upgrade Advisor and he says: I have all kinds of compatibility problems with drivers toshiba n such, he also says that I don't have the vista service pack (in which I don't have) so I kept installing updates from windows but the option to install SP1 never showed up. So I downloaded manually 440 mb SP1 on MS website, but it will fail to install due to an error. Can anyone help?
NightFury,
Try the following and let us know the result.Run the disk error checking
Then run the System File Checker
Will download and run the System Update tool
Make sure to note one of these tools can display error messages.Will they all work fine and correct problems, and then run Windows Update. After installing other updates, then try the manual installation for SP1. It would also be useful to know what error you get when SP1 installs.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problem upgrading from Windows 7 to Windows 10
I am trying to upgrade my Windows 7 computer to Windows 10. I use firefox as my browser. I clicked on the download link on the page of Microsoft, I down load in the load file. When I click on the link to launch the mild wear, a box with a red X in a circle appears on my screen and declares that a required privilege is not held by the customer. I'm the rumming of the only person from my computer. Also, this message came when I try to upgrqade firefox. What could cause this problem. I want to upgrade my computer.
What happens if you try to run from Internet Explorer?
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
Problems upgrading from Vista Home Basic to Vista Ultimate.
I have a Dell pc came with Vista Home Basic (currently the SP2). I bought (the store) DVD Vista Ultimate Upgrade (SP1). I tried to do an UPGRADE, I prefer NOT to do a fresh install, and he says the upgrade (part) has been disabled and I need to upgrade to a version of Windows that is more recent than the version that I am running. I thought that Vista Ultimate IS an UPGRADE to Vista Home Basic? Both are 32-bit. Any thoughts? (FYI... I don't want to upgrade to Windows 7 at the moment).
Hello
Your problem is with the Service Pack level; not the version of Vista.
The installed operating system has SP2 installed, but the upgrade disc does that SP1 is installed.
That's why you get this message because SP2 is a newer version than SP1.
Uninstall SP2 > do the upgrade for Ultimate > reinstall SP2
"How to uninstall Windows Vista service packs as a troubleshooting step"
http://support.Microsoft.com/kb/948537
See you soon.
-
Main problems after upgrading from XP to Vista on Qosmio F20
I have recently upgraded from XP to Vista on my Qosmio F20 and having problems. It seems that I lost the ability to change screen resolutions, to adjust the volume, brightness, etc. Basically, I lost the laptop functions. I also tried updating the BIOS but get the following error message "BiOS update only is not supported OS - unsupported OS or service pack installed.»
This also makes very slow computer.
You now have a few questions, or you wrote just a report on your experience of Vista on Qosmio F20?
The fact is that Toshiba does not support Vista on this laptop model and thereby you will ever complete Vista of operation (including the Toshiba tools and utilities). For supported laptops, Toshiba offered special Vista supporting BIOS but for your laptop, this update of the BIOS does not exist.
Sorry! :(
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
upgrade from 9i to 10g problems/tips?
Hello
I want to know some problems that someone face when he upgrade from 9i and 10g, I know it's dependent on the environment, but I want to know the most famous twikies or problems or tricks that someone should do when you perform this upgrade.
Thanks for any thoughtsThere is a guide to tahiti.oracle.com upgrade:
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/TOC.htmThe upgrade of Oracle 9i and 10g database: what to expect of the optimizer:
http://www.Oracle.com/technology/products/bi/DB/10G/PDF/twp_bidw_optimizer_10gr2_0208.PDFSearch Metalink (support.oracle.com) to 10 g upgrade companion PDF database and application.
If one carries out executions plans are worse than you can use the following workaround to restore 9.2 behavior until it is resolved:
optimizer_features_enable = 9.2.0.0
-
Upgrade from VM 4.0 unit (3) 4.0 (4) SR1 - weird problems
I had some very weird VM problems upgrade unit last night. I ran through the Installer (had a few minor problems but got through them).
I ran the Wizard permissions specifying the appropriate account. I then started to "Set up the Services of the unit". When you are prompted for the installation of the unit account, I chose the AD administrator account (VM only, for simplicity customer wants all the unit services run under XYZ\Administrator instead of unityXXX) and typed the password. Error box "You don't have sufficient access to verify this accounts password"
and I can't go forward.
I then went in AD, properties of the administrator account. Under Security - Administrator there are 1 or 2 notches, but had checked everything groups accept full control. For the administrator account, I checked full control, wound up and disconnected.
I connected back with the account of XYZ\Administrator, re - a properly executed 'Set up the Services of the unit' and the installation is complete. Great!
I restarted the server at the end of the installation. It took about 10 minutes to logon Windows and a functional desktop computer. Most of the unit "log - on as" services began. Catalog AvDSGlobal and Karina was able to start with connection reported failures. In each of the services I've changed the password for the connections and services.
Then we ran the 4.0 update (4) sr1. No problem, the server restarts, I take a quick glance to make sure everything is ok.
DooHH! Catalog AvDSGlobal and Karina was able to start with connection reported failures. In each of the services I've changed the password for the connections and services. Services are still not start! Go to AD - User - Administrator - Properties - Security - check "Full control" (I did an hour ago, and now authorities have returned back.). Log, log, services fail to start. Run the permissions wizard, start the services. Everything works.
Being a gluten for punishment, I rebooted again. Repeat the paragraph. In its current form unity 4.0 (4) SR1 VM is running.
Administrators have strict instructions not to restart the server.
That is what it is?
Unity 4,0000 SR1
Voicemail only
Exchange 2000 SP3 with after cumulative hotfix installation Windows 2 K SP4 with a bunch of updates.
HI -.
The first thing that caught my attention was that you use the same account of directory service and message store service. The 4.0 (4) guide installation, Exchange 2003 or Exchange 2000, Cisco says "the permissions required by the conflict of services account directory with the permissions required by the message store service account, then you need to create separate accounts for the two types of services." Here is the link - http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_installation_guide_chapter09186a008022b8ae.html#wp1551275
The other thing to check in your AD infrastructure is that the wizard of permissions of the unit can work very well, but does not know that the legacy has been disabled. Other behavior you see related permissions devulcanization back can occur when the account is a member of a protected group, as directors. I think it was just a problem with 4.0 (3) and the AdminSDHolder object. You can check the permissions for this object that are listed in this link to make sure you it is configured properly on your server and make sure that the inheritance is checked - http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a00801c3224.shtml
Kind regards
Ginger
-
Upgrade from trial to purchase. The country's problems.
Hello!
Trying to upgrade from trial to purchase. It does not allow me to say if its not available in my country. I am a student so I made my account home to Puerto Rico, but I'm studying in Savannah, Georgia. They are available in both places. I am buying in Savannah, he won't allow it. I don't know what to do. Someone knows what to do? Thank you!
Hello
Please see change the country associated with your Adobe ID
Otherwise, you can contact adobe sales to place an order.
Kind regards
Sheena
-
Why the scroll bar arrows disappeared from Firefox when I upgraded from Fedora 17 to 18 years?
Recently, I upgraded from Fedora 17 to 18 of Fedora. Before the update, Firefox worked perfectly. Now, the arrows have disappeared of the scrollbar on the right. How can I get back them?
This problem is not moved in other applications - in Firefox.
Alternatively, you can check for problems with the file localstore.rdf.
Do you have a scroll bar (that is, only the buttons have disappeared)?
You use the default theme of Firefox (Tools > Modules > appearance)?
You can attach a screenshot?
- http://en.Wikipedia.org/wiki/screenshot
- https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
Use a type of compressed as PNG or JPG image to save the screenshot.
You can try to check if another theme or icon pack Linux brings them back.
-
Hi all
I have a HP Pavilion DV7 with 7690 m XT graphics card.Model of the laptop is dv7-6c02em.
Is this smart upgrade from Windows 7 to Windows 10?
(I have heard and read about a lot of problems with the drivers are missing.) When I check my driver models his almost empty page.
Does anyone have any experience with the upgrade to windows 10? (both good or bad)PS - I don't trust more HP and their assumption of the pilot, also its my work laptop. (associated with very important Bank of programs on this subject).
Thank you
VENOMs7000 wrote:
Hi all
I have a HP Pavilion DV7 with 7690 m XT graphics card.Model of the laptop is dv7-6c02em.
Is this smart upgrade from Windows 7 to Windows 10?
(I have heard and read about a lot of problems with the drivers are missing.) When I check my driver models his almost empty page.
Does anyone have any experience with the upgrade to windows 10? (both good or bad)PS - I don't trust more HP and their assumption of the pilot, also its my work laptop. (associated with very important Bank of programs on this subject).
Thank you
1. the older system with Win7 should not go Win10 that HP provides no support any drivers for it unless it was made in 2013.
2. your specific HP PS comment is false with no facts to backup. We should refrain from making these comments - does nothing to help other users.
-
I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
Message:
"Checking file system on C:.
The type of the file system is NTFS.
One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
To check the disk a press any in 10 second (s). »How your problem is related to Windows Update (compared to the Windows upgrade)?
This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Unable to upgrade from Win98 to XP
When one of my friends gave me an office with no hard drive, Windows XP upgrade CD and a hard drive that is not installed in the office.
I installed the HARD drive in the desktop and install the new Windows 98 installation, it worked very well. When I tried to upgrade to Windows XP, it won't Cross and has a lot of compatibility problems. I installed the ASUS chipset and all the other drivers from the ASUS site before moving to XP. He always stubborn won't let me update.
I am unable to get the upgrade, and yet I am frustrating. I wonder how can I "force" the HARD drive to accept the new update of Windows XP? Clones old HDD to new HARD drive work?
The office is probably not OEM. It seems to me it's built pc. The motherboard is ASUS P4V8X-MX. I kinda wish I could find commercial full Windows XP for under $ 20. :/
Hi Deafbusta,
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the issue you are facing problems with the upgrade from Windows 98 to Windows XP. I will certainly help you in this regard.
I suggest you to refer to the help article and check if it helps.
How to prepare to upgrade from Windows 98 or Windows Millennium Edition to Windows XP
http://support.Microsoft.com/kb/316639How to install or upgrade to Windows XP
http://support.Microsoft.com/kb/978307Taken Windows XP supported upgrade paths
http://support.Microsoft.com/kb/292607
Support for 98 was completed, refer to the article:
Support for Windows 98
http://support.Microsoft.com/W98
It will be useful.
Let us know if you encounter problems with Windows in the future. We will be happy to help you.
-
problem upgrading to Windows7 Windows XP Professionalge.
Hello everyone and happy to be here. I have a problem upgrading to Windows7 in Windows XP Professional. I have a Dell E510 while upgrading to Windows 7, I have reached the installation window and my complete system each item listed with a check mark next to: (copy of Windows files), (gathering files, settings, programs), (extension of Windows files). reached 27% full. I get a massage from windows restarts now... The computer does not restart. He asks me to press any key to boot from the CD. Once it goes to that, a window pops up that says "Windows starts now." It is not to go further than that. I release the CD and turn off the computer. When I restart again, a window prompts you to say 'start from the old system or windows put in place. " If I press windows set up, it does nothing. When I press on the old system, it restarts in Windows XP, and then a window invites you to tell me 'the computer started on your old system. It would not be upgraded. Contact Microsoft. This is getting very frustrating. I installed the Windows 7 DVD on my other HP computer without problem. But when he asks me to press any key to reboot from dvd and you do. There is no that start the installation from the beginning. "Collection Windows files, them"start windows"and them it is he don't, don't go anywhere." Can't someone help please? Thank you and I appreciate the help.
Do not touch the keyboard when you are prompted to "Press any key", sit and wait Windows to continue the installation. Also did you select the 'custom' and not the 'Upgrade' option at the beginnng of the installation process.
J W Stuart: http://www.pagestart.com
-
I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB
Hello
Thanks for the reply.
I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.
Method:
Reset permissions
============1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = fSubinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f@Echo =========================
Completed @Echo.
@Echo =========================
@pause6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."
If the same thing happens, move to the next step.
Run the upgrade by using the built-in Administrator
================================
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4 copy the following command and press ENTER:
NET user administrator / Active: Yes
5 restart the computer and then log on the computer of this administrator account.
6. run the upgrade to windows 7.
Hope this information helps you.
Maybe you are looking for
-
I tried to have thunderbird connect and download email from one of my google accounts. I kept getting errors of password, then one email from Google on another account, telling me that this account has failed. partial quote below. They indicate that
-
Satellite A200-1 s 5 - can I use a 3G card?
Can I use a 3G controller PCI Express Mini card in this model?
-
NIDAQmxBase uses differential signals?
I recently updated the NIDAQmx Base to the plus version and. But now I'm a horrible corruption of my signals. I checked with a scope and the signals are correct, but it sounds horrible crosstalk between channels. The only thing I can think is that
-
Windows xp home edition, can't remember my password
This is completely new for me.my pc has windows xp home edition 2002.i had to UN plug my pc with xp and plug a different tower out of old data.when I reconnected to my pc with the xp I am made to connect, I don't remember my password .i can't go anyw
-
Original title: Everythinh went My grandson unintentionally (I think) installed my original disc of Widows Vista and apparently followed all the guests was, as all before today disappeared. How can I restore back to where was before this...