Problem w/registration simple image .png

Similar Questions

• Problem of layer with Image PNG in IE 7

  According to the lab browser, IE 7 does not display my transparent PNG image on top another image like all other browsers are. It is the hallmark of '100% Satisfaction guaranteed' at the top of the site.

  http://home.Comcast.NET/~Steven.Kay/windowdudes/index.html

  Any advice would be appreciated.

  Steve

  AHA - you're in the real mysteries of the elements absolute position now my friend.

  First, however, I must say that I don't like for purposes of absolute positioning to build this page.  It is quite useless and you had problems as it continues to do so if you continue to use it as a page layout tool.

  The problem is the following - your div #seal has received a z-index of 10.  But he is a descendant of another positioning absolute div - #branding.  This ancestor div does NOT HAVE a z-index, and so is by default 1.  So you have a div parent with z-index 1 and a descending div with a z-index of 10, but that the z-index of 10 can ONLY APPLY in THE CONTEXT OF THE PARENT.  External to the parent company, this div #seal has only a z-index of the parent, for example, 1.  And since its code occurs earlier in the code that does the code of the sliding panel, div #seal appears behind the sliding panel.  Why he does so only in IE7, I can only attribute to the curious mixture of positioning you used here.

  To solve the problem, I remove all this positioning completely and only position the sliding panels.

• DW CS3 problem with images PNG-8 in design mode?

  DW CS3 (build 3481) XP seems to have problems with PNG-8 images, specifically trying to in Design view.

  I had a very simple image that could be exported by Fireworks CS4 as PNG - 8 using 4 colors (no transparency) for a file size tiny less 250 bytes.

  Impossible DW display at all, or even recognize it, reports that it was 0 x 0 in size. I published the page anyway, and he seemed fine in the browser.

  I upped the number of colors to 32, and DW could then view it in Design view in the page, I was working on that.

  I always have problems with the other PNG-8 images. The attached file "temp.jpg" is a screenshot showing the part of the design view in DW.

  The small picture to the left of the banner is "58_certificate_of_discharge.png" (attached), and the largest image below is used as the background of the DIV containing the form, (also enclosed) "compassbk.png".

  These pictures all look well in the browser, but terrible in DW.

  I'm puzzled as to why.

  Thanks in advance.

  I think I can say that if this is a problem with the CS3 version, you're stuck with it.  I have never known Adobe/Macromedia to patch a version, once a newer version has been released.  I saw no problem with the PNG 8-bit, 4 colors seen in CS4, I created, and I guess that would apply also to the other variations of your.

• Problems loading images png in flex 4.

  For some reason any in my application when I use specific PNG images they will not load.  They do not have a high resolution, or they are very important.  For example: does not load in a component of mx:Image, but will be.  Does anyone have an idea, what would be the difference between the two?

  the mxml that I use is something like < mx:Image source ="IMG/imagename.png"/ > where IMG is a file in the main directory.  The two images are stored only in those places and yet it will load and the other won't.

  It's incredibly complicated to me, and I would be grateful for all the assistance.

  First of all, I would like to try, in your IMG file, rename badfile.png to xbadfile.png and then duplication goodfile.png to badfile.png, without changing your code.  Then, run it and check that you do not see the png.  That is to ensure that the problem is really with the png and not your code somehow.

• Problem with image .png in black boxes in InDesign

  Hello

  I hope someone can help me with a problem I have with some .png files.  When I try to put some .png files in my InDesign document, they come as just the black boxes.  The .png files are created by a third-party application, (w/MathFlow EditLive) but if I view the .png files in Fireworks or other viewers the image, they seem to be fine.  I tried to look at the properties of the image inside InDesign, to see if distorting them, it might work, but I'm not a graphic designer by trade so my knowledge is rather limited.  Any help would be greatly appreciated.

  Data sheet:

  Windows XP

  Suite CS4 including:

  Adobe InDesign CS4

  Fireworks CS4

  Thank you

  Josh

  Is it possible that some of the png have Alpha channels? Can you open in Photoshop and save as png? What happens when you put these files?

• When using an accept custom attribute on an input file his show all files rather than the files that I choose (accept = "image/jpeg, image/gif, image/png, image)

  Hi, I am trying to use the entry of the file accept to limit the type of file that the user can choose when downloading a file. in fact, I have two problems that I can't understand our:

   1. If i am using the value "image/*" its limit the user to all the images but if i am using a custom
       limit e.g. "image/jpeg,image/gif,image/png,image/bmp" its show all the limits in the select box but the
       default value for ths user is "All Files". In Chrome and IE10 its working as needed.
  

   2. When i am trying to limit to "swf" files using the value "application/x-shockwave-flash" its show "All Files".
       In Chrome and IE10 its working as needed.
  

  I use Windows 7.

  Thank you.

  Well, it seems you do what it says in the documentation: https://developer.mozilla.org/en-US/docs/HTML/Element/Input#attr-accept

  Firefox actually allow you to drop a folder that is not on the list? In other words, is the problem of acceptance is ignored, or that the filter does not display the dialog box?

  Have you had a chance to get all of the bugs in Bugzilla?

• Problem with creating an image map

  I struggled to create a simple image with Dreamweaver CC map.

  I'm in Design view and have a simple flowchart that I would have on my site with each network diagram box with a link to an additional page with more depth on the subject content.

  If I click on the image in live view, the properties toolbar does not show the part of image map (see first image).

  

  However, if I click on the code from the image map controls appear (see the second image).

  

  Now, behold, where the question is...

  If I click on the rectangular selection tool in the map properties bar and then try to select the portion of the image to have a point of access/link; the part of the map of the toolbar disappears and returns to the appearance of the first view?

  Therefore, I can't make a selection or create the HotSpot...?

  Please help with advice you may have.

  The site is responsive, and I decided to recreate this image as an SVG, so that it can scale - with a sensitive site, but I just want to experiment with the layout before generating the final graph.

  Thanks for any help you may have!

  Problem is that you are in LIVE view mode.  Switch to DESIGN view for working with image maps.

  

  What happened to the use of SVG for your tree?

  Nancy O.

• Problems to display the image in the region from the list

  Hello everyone

  I problems to View an image not to come de the worksapce in one list

  Create one region type list using le vertical image list model et j’ai want to le image only is displayed in each entry de la list come du web Server, do this easily in a report in following way:

  "< img src="/apps_resources/APP121/glyphicons_halflings_080_circle_plus.png "alt =" ">

  But it does not work work on one list, I tried different ways and No work

  Anyone not know How do this correctly?

  Best regards

  Apex 4.2.0

  Oracle 11 g R2

  Apexlistener 2.6 deployed in tomcat

  The problem is that the image prefix is hardcoded in the src URL in the model of vertical image list. Make a copy of the template, edit to remove the chain of substitution #IMAGE_PREFIX # amongst the current list template definitions and model list associated with and use the new model to the region of your list.

• Problem with a simple integral

  Hi all

  I have 2 problems with a simple integral, and I do not understand how the first HP solves.

  My first problem is that if I add a constant before my variable, the answer becomes really weird.

  My second problem is that if I just change one letter (q becomes Q), the answer changes completely.

  I am attaching a picture of the calculations so that you can understand my problem.

  Thank you very much for your help

  Kind regards

  Xavier

  When you type wx you now have a variable named "wx" - not w * x which is what I suspect you intend. You must manually add a multiplication between them.

  When you use the Q, you are actually using the predefined global real variable that is most likely the value 0. If you've stored 2 in Q, I suspect that you'll get a different result. Remember that all variables in capital letters from A to Z and THETA and already defined as real numbers. VARS-> HOME-> REAL-press and you will see them.

• I want to buy 8 simple images, but not subscribe to a monthly plan. Is this possible?

  I want to buy 8 simple images with special pricing (sept 1 thru Sept 20,2015), but not subscribe to a monthly plan. Is this possible?

  Yes, you can buy images without a subscription. However, there is no way to buy several images in a single transaction. So it will take 8 separate operations.

• Problems to import still Images; Convert all in the SAME Image

  Hello

  I am new to Adobe first CS_5 (usually use of the CPF).  I have problems to import still images.  Even if the images are all different and have unique names (I'm importing .jpg), every time I have import the images that they ALL convert the image even when I drag them to my timeline.  So, when I look in the project - any image area, I click on, they are all the same (but with their original names).  Anyone know WHY this happens and how I can fix this problem?  For the life of me, I can't understand it.  Thank you in advance for the noob.

  Kalei

  It's definitely weird! What are the names of the jpg files? The only thing I can think is that if they have the same base with sequential numbering name, then perhaps they are imported into several instances of the same sequence of image.

• Problem moving loaded external image

  I am new to AS3 and I'm having a problem moving an external image loaded into a class. I don't know how to move the loaded external image.  I thought about creating a Sprite and then passing an extra child Sprite, which I would then load the image.  But I get this error:

  1119: access of property may be undefined spHolder through a reference with static type flash.display:Sprite.

  I commented below where the error is triggered:

  ==========================================

  package {}

  
  import flash.display.MovieClip;
  import flash.display.Sprite;
  import flash.events.Event;
  import flash.display.Loader;
  import flash.net.URLRequest;
  
  SerializableAttribute public class extends MovieClip {} snapshot
  
  public var strLink:String;
  public var strImage:String;
  private var spPolaroid:Sprite = new Sprite();
  private var ldPhoto:Loader;
  
  function SnapShot(strImg:String,strURL:String):void {}
  
  strLink = strURL;
  strImage = strImg;
  
  trace ("new snapshot");
  
  spPolaroid.graphics.beginFill (0xCCCCCC);
  spPolaroid.graphics.drawRect (0,0,120,140);
  addChild (spPolaroid);
  
  var spHolder:Sprite = new Sprite();
  spHolder.x = 10;
  spHolder.y = 10;
  spPolaroid.addChild (spHolder);
  
  loadImage (strImage);
  
  };
  
  private void loadImage(strUrl:String):void {}
  
  ldPhoto = new Loader();
  ldPhoto.load (new URLRequest (strUrl));
  ldPhoto.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);
  
  };
  
  private void imageLoaded(evt:Event):void {}
  
  spPolaroid.spHolder.addChild (ldPhoto); This is where the error is to hit
  
  };
  
  };
  
  };

  ==========================================

  I can honestly say that I don't know why the problem exists... and that's probably because I'm not well versed in the field of the class.  But since you have a handle on the spHolder object, you do not need to target through the parent...

  private void imageLoaded(evt:Event):void {}
    
  spHolder.addChild (ldPhoto);
             
  };

• problem with the transparency of PNG images on evolution

  I'm trying to display a picture of *.png with transparency. If I create a bitmap of it field, it displays well with transparency.

  But if I resized the image and the screen then using BitmapField, the black of displays of transparent areas.

  Does anyone have any idea on this?

  I recommend that looking for before you post a question.  This question has been asked and answered a few times already.

  Here is the solution:

  http://supportforums.BlackBerry.com/T5/Java-development/resizing-transparent-bitmaps/Ta-p/703239

• Simple question on. Images PNG/transparent

  I had to do a little work on a transparent image that will sit on a black background. I noticed as soon as I put the image on background is somewhat some layer mask changes I made are showing up... it's where I didn't quite hide all correctly. My question - is there a way to check my image in PhotoShop on a black background before I save it as a PNG?

  Thank you

  Before saving the image, put a layer of filling of solid under layer color

  that your mask. You can double-click the fill layer

  thumbnail to change the colors, depending on the background that you will use

  thereafter.

  Then just delete the layer or turn off the visibility if your use save for web.

  As you can see below some black in the flower where I missed in the masking.

  

  

  MTSTUNER

• Problem with a Bitmap image in a ButtonField (get a 104 NullPointerException error)

  Hi, I'm a beginner in programming BlackBerry Apps, well...

  I tried to create a simple ButtonField customized with a bitmap inside, but I constantly get an error 104 eception: NullPointerException, here is my code to field custom buttond.

  import net.rim.device.api.ui.component.ButtonField;import net.rim.device.api.ui.Graphics;import net.rim.device.api.system.Bitmap;
  
  public class CustomButtonField extends ButtonField{  
  
    private Bitmap imagen;
  
    CustomButtonField(Bitmap imagen, long style){
  
        super(style);     this.imagen = imagen;                     }
  
    public int getPreferredWidth(){
  
                  return 60;        }
  
    public int getPreferredHeight(){
  
        return 60;        }
  
   protected void paint(Graphics graphics) {
  
        graphics.drawBitmap(0, 0, imagen.getWidth(), imagen.getHeight(), imagen, 0, 0);   }
  
     protected void layout(int width, int height) {
  
        setExtent(getPreferredWidth(), getPreferredHeight());
  
      }  }
  

  import net.rim.device.api.ui.container.MainScreen;import net.rim.device.api.system.Bitmap;
  
  public class PruebaScreen extends MainScreen{    
  
    private CustomButtonField boton;
  
    PruebaScreen(){
  
        Bitmap imagen = Bitmap.getBitmapResource("res/img/icon.png");     boton = new CustomButtonField(imagen, 0);     add(boton);
  
    }}
  

  I suspect that my problem is due to the method of painting or the page layout, I don't know... I hope someone can help me, thank you very much in advance.

  Check if your getBitmapResource returns any non-null Bitmap image.  Specify the path correctly may take a few tries ("' / res/img/icon.png '," img/icon.png", etc.")