Problem when I run an application

Similar Questions

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• ORA-00942 when you run the application after import

  APEX 4.1.1
  
  Hello
  
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.
  

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
      is_internal_error: true
      ora_sqlcode: -942
      ora_sqlerrm: ORA-00942: table or view does not exist
      component.type: APEX_APPLICATION_COMPUTATIONS
      component.id: 3102806535980644
      component.name: LANG
      error_backtrace:
  
      ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
      ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
      ORA-06512: at "APEX_040100.WWV_FLOW", line 4155

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT  LANG_CODE
  FROM    GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')

  All advice where to look?
  
  Published by: Anne-Marie Rosa on August 16, 2012 05:37
  
  Published by: Anne-Marie Rosa 16 August 2012 06:32

  Hello
  >
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
  is_internal_error: true
  ora_sqlcode: -942
  ora_sqlerrm: ORA-00942: table or view does not exist
  component.type: APEX_APPLICATION_COMPUTATIONS
  component.id: 3102806535980644
  component.name: LANG
  error_backtrace:
  
  ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
  ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
  ORA-06512: at "APEX_040100.WWV_FLOW", line 4155
  

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT LANG_CODE
  FROM GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')
  

  The source of the error is ora_sqlerrm: ORA-00942: table or view does not exist

  Search for the name of the calculation Application in APEX_APPLICATION_COMPUTATIONS APEX view using component.id: 3102806535980644 to find his name.

  Once you have the name, you can change this App mockup and understand what Table/view is not available.

  See you soon,.

  PS: {code} is the tag, which is tiny.

  Published by: Dominique 16 August 2012 18:01

• Exception when you run the application deployed standalone WLS

  When you run the application deployed in a standalone WLS, I get the following exception, and nothing will be displayed in the Explorer. Running-in of jdev/integratedWebLogicServer is however very well. I deployed the application in jdev to the autonomous WLS.
  

  ]] Root cause of ServletException.
  javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: cannot instantiate class 'com.oracle.pm.eai.supporttool.ui.bean.SupportToolBean'
       at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:192)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:180)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:860)
       at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:112)
       at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
       at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
       at com.sun.el.parser.AstIdentifier.getValue(AstIdentifier.java:68)
       at com.sun.el.parser.AstValue.getValue(AstValue.java:107)
       at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
       at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:251)
       at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
       at javax.faces.webapp.UIComponentClassicTagBase.createChild(UIComponentClassicTagBase.java:486)
       at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:670)

  Here are the versions WLS and Jdeveloper, I used.
  WebLogic 10.3.3.0
  JDeveloper 11.1.1.3.0

  Hello

  It seems that there is something wrong with your support of bean is instantiated.
  Check that it is correctly stated in the taskFlow and you have a default constructor in your backing bean.

  Gabriel.

• How to change the icon of the browser when you run the application

  Hi guys,.
  
  How can I change the icon of the browser when you run the application. That is to say the icon that the browser displays when we surf on this forum is a red square.
  
  I typed the following text in the page template, but nothing happened
  

  < link rel = "icon" herf = "" #IMAGE_PREFIX #erp.png "type =" image/png">

  " I hope that my question is simple,
  
  
  Kind regards
  Fateh
  
  Published by: Fateh June 30, 2011 03:36

  See + {message identifier: = 9591426} +.

  2 things: it is href not herf; and the only image file format with complete cross-browser ICOsupport.

• Login page not coming up when I run the application!

  Hi all
  
  ORACLE 11G, 3.1.2 APEX
  
  I'll have an application with multiple pages and have the login page too. I use the account database as the logon mechanism. When I run the application, my login page is not coming sound directly to come with an application page that the user gets in once the connection is successfully.
  
  Can I know why the login page does not come on the screen when I run the application!
  
  
  
  Pls let me know as soon as possible!
  
  
  Thank you/kumar
  
  Edited by: kumar73 may 18, 2010 09:00
  
  Edited by: kumar73 may 18, 2010 09:29
  
  Edited by: kumar73 may 18, 2010 09:29

  Looks like all your pages have authentication value "Page is Public. Change them to 'Page requires authentication' with the exception of the login page.

• Today I imported recently an android project in my workspace in eclipse android 4.2.2 then when I run the application it is show Eroor: unable to solve the target 'unknown target problem Android android-7 "tru."

  Eclipse SDK

  Version: 4.2.2
  Build id: M20130204-1200

  When I right click on the app and clcik as run as application Android Iam see following errors: -.

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Unable to solve the target 'unknown target problem Android android-7 "tru."

   

  including AndroidManifest.xml is as below:

   

   

  
  http://schemas.Android.com/APK/RES/Android ".
  package = "com. Tru.
  Android: versionName = "3.47" android: versionCode = "073434" >

  
  

  
  Android: largeScreens = "true".
  Android: anyDensity = "true" / >
  
  
  
  
  
  Error: it is only allowed to the system applications
  
  

   

   

  A number of permissions of the Android app is not supported. The impact of these unsupported features varies.

  Visit this link and check the authorization of any authorized all in porting the app... If the permissions that your application requires in the right list you might need to make some changes in your application

  https://developer.BlackBerry.com/PlayBook/Android/apisupport/unsupportedapi_playbook_app_permissions...

• Signature problem when you run the program BluetoothDemo on Blackberry 8320

  Hello

  I try to connect from my computer to the Blackberry 8320 using a serial Bluetooth transceiver.  The "BluetoothDemo" program is not function properly.  When I run it, I first see a white screen with "Bluetooth Sample" at the top.  I click on the trackball and I get a menu with the options 'Listening to connections' and 'Full Meno'.  I click on listen for connections and a screen pops up that says "connect to an external device and then type something...» "I type something on the Blackberry and the letters appear, but no other options appear to verify a Bluetooth connection.  I have already associated the Bluetooth with Blackberry, but the connection failed appears when I run the program BluetoothDemo. When I click the trackball again, I see the full menu with "Serial Port close',"Get DB", etc..

  In my view, that there is a problem with secure API signatures.  Obviously the 'BluetoothDemo' program is not run after the first steps.  When I debug on Blackberry, I see the following output from the console, which leads me to believe that there is a problem with signatures:

  ocusHistory: Focus lost; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  JVM: bklt @286061: timer
  JVM: bklt @286061: idle 15
  JVM: bklt @292270: setTimer 15
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  MWC: BluetoothDemo (4738) No sig 0 x 33
  From BluetoothDemo
  MWC: BluetoothDemo (4738) No sig 0 x 33
  BluetoothDemo (167) started
  BluetoothDemo (167) foreground
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  FocusHistory: Acquired Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  FocusHistory: Lost Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  BT: allocSerialPort a0d729a8
  BT: sdpAddRecord
  BT: allocSdpAttributeData
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  BT: SppWrite-1 failed: 1
  Unable to write data. Exception: java.io.IOException: BtSppWrite failed

  I was puzzled at first running the program of BluetoothDemo and initially built and generated a file alx for the com_rimbluetoothserialportdemo program, which I think is used by the BluetoothDemo program.  The com_rimbluetoothserialportdemo program is currently connected to Bluetooth tx/rx, as indicated by the status of remaining devices firmly on instead of flashing (when BluetoothDemo runs the status light flashes, indicating no connection). When I switch between workspaces in which I have these projects, the set of keys is not signed, and I have to sign in again, which seems to cause the keys in the other workspace to become not signed.  As further evidence of the strange signature problem, sometimes when I run either on the Blackberry there is an error that says that the application is not signed.

  I want to delete the workspace and the file alx com_rimbluetoothetc could be a step in the right direction.  Do I have reason to assume that the 'no sig 0 x 33' is a problem with API signature secure?  Could BluetoothDemo access to com_rimbluetoothserialport and be denied because there no signatures?  Thanks for any help you can provide.

  Not sure that your reading of the code is correct.

  _dout.writeInt (JUST_OPEN);
  _dout. Flush();

  These two statements will write out - which seems to be the first thing the code does.  Then it goes into a loop of reading, but suppose a specifically formatted data.

  In my test, I removed these and replaced with something that I thought he would be working and I'm depending on the device.  As noted yesterday picked up O the data of a GPS puck - these things just send data, they never expect anything in return.  So my code looks like this:

  byte [] buffer = new byte [1024];
  for (;;) {
      int len = _din.read(buffer);
      String justRead = "Read: " + Integer.toString(len) + " bytes: " + new String(buffer, 0, len) + '\n';
      System.out.println(justRead);
  }
  

• When I run any application CC, I get a message saying that I need to update the application manager.

  When I download the application manager to update, I get an error message saying that the "failed initialize" and that I have to download some software more to detect the problem, but that software is no longer there. That question apparently started spontaneously after no problems at all for a month or two.

  

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• How popup screen when you run another application

  I want to design an application running in background when an event is active as you receive a mail, the application will appear a screen and show some info. How to implement, which can help me, thanks

  Using messageAdded method, try something like this...

  Application.getApplication().invokeLater(new Runnable()
  {
     public void run()
     {       UiEngine ui = Ui.getUiEngine();       Dialog dialogScreen = new Dialog(Dialog.D_YES_NO, "Your Message Text here...",                Dialog.NO,Bitmap.getPredefinedBitmap(Bitmap.INFORMATION),Manager.VERTICAL_SCROLL);       ui.pushGlobalScreen(dialogScreen,1,UiEngine.GLOBAL_MODAL);   }
  }
  

• Hi all. When l lance a game Sudden Strike 3 I get error "insufficient privileges: u must be administrator when you run this application for the first time". What should I do?

  I have already checked that his play on preivileges admin % but still run it.

  Make a right click on the shortcut, go to properties, then find target. Right-click on the application and in the menu that appears, select run as administrator.

  The message that you shouldn't have to do is run once in this mode.

• How did resolve you the following problem when you run the windows backup utility? Error code 0 x 1000037 failed due to shadow copy.

  I tried to look for the answers and on google but the problem persists. Do not understand the junction / point analysis answer either!

  Hi Rohit,

  The problem was solved when I did a full Scan using the microsoft security essentials program. He has taken a few hours to analyse and found two problems with Java. I removed those and the backup took place without problems.
  Thank you

• Problem when deploying an ADF application to a remote server

  Hello

  I have an app ADf with just a Page JSF (created automatically as a form of parameter ADF data control)...

  I run the page on the integrated weblogic server and it works fine,

  When I have it deployed on a remote server, the successful deployment but when I tried to run the page using http:// < server-url >: < server-port > /Portal demo-ViewController-context-root /

  the button send is not made, all items on the page EXCEPT the submit button!

  Any Suggestion?

  P.S: JDeveloper version is 11.1.1.6.

  Thanks in advance,

  Kind regards

  OLA,

  Have you checked that the ADF runtime is installed on the remote server and the managed server, you perform the deployment has access to them?

  You see error messages in the server log file?

  Timo