Problem when writing subquery

Similar Questions

• Problem when writing hidden beforehand, sets

  OK, I'm having a problem when masking a layer of Twixtored.

  This is what happens:

  I have the original footage into a computer, I used twixtor to it slow down to 3% of the speed

  Seen here: http://prntscr.com/zbicc

  I then composed pre which slowed down in a model of its own and hidden around that parts I wanted and named this model "obliterated comp 1.

  Seen here: http://prntscr.com/zbitw

  and here: http://prntscr.com/zbiyc

  I précomposé then the hidden in another comp called 'replacement of the sky' layer and that's when I hit the problem, it does not appear, it gives me just a black screen.

  Seen here: http://prntscr.com/zbj9n

  and here: http://prntscr.com/zbjcn

  I tried to make ' Masked comp 1 ' and 'replacement of heaven' and with the two it just shows a black screen, but if I turn the Twixtored model that makes very well. So I think it has something to do with the mask, but I can't understand it.

  Help, please.

  Black screen, I see two VERY big problems in the workflow as described... or at least as how I understand your workflow.

  You used Twixtor for slow video to 3% of its normal speed: this is tons and tons of redeuction of speed, and you're lucky that Twixtor has been able to give you a picture useful to ALL.  Then you precomped, too boot.

  Then, you were hoping against hope that you could effectively mask the precomp... which was probably the target frame rate.

  Give you a chance to find something: once you use Twxtor, prerender it.  And I have to tell you: If you actually use Twixtor to slow down the film to 3% of normal speed, it probably doesn't look good.  Twixtor is optimal for minor speed variations, but for 3% of normal?  He cannot work miracles...

• Faced with a problem when writing to a txt file with stop button start

  Hello

  I am trying to use this stop start program that I found while surfing around this great discussion. actually I want to

  to write data to a text file when I press start button and it should stop writing when you press the stop button and

  After that whenever I press the button start again he should invite me for the new file name. now, even if I change the

  name of the file in the path dialog box it gives me error when I try to stop the program by pressing the stop button.

  need help to solve this problem. VI is attached with this post.

  Thank you

  with impatience... Hussn

  Hello Hussain,

  Sorry about that!  A bad tie.

  You can go there.

  Kind regards

• Provider-> DUNS_Number problem when writing the script of provider

  Hi all
  
  I'm working on the script of migration provider. I used (AP_VENDOR_PUB_PKG) APIs to create sites of provider and supplier. Version of the application is 12.1.1
  
  I have to change the DUNS_Number value to the supplier. to test, I created provider of front end.
  When I create the front end provider, DUNS_Number is not stored either in AP_SUPPLIERS or AP_SUPPLIER_SITES_ALL Tables but its storage in the HZ_PARTIES Table.
  
  Here, my question is, why it is the DUNS_Number value in the HZ_PARTIES TABLE storage, why not in the AP_SUPPLIERS Table?
  
  Please suggest me via script, how can I insert the DUNS_Number table AP_SUPPLIERS or AP_SUPPLIER_SITES_ALL value.
  
  Please help me with this problem.
  
  
  Thank you.

  Hi again,

  Try to update to HZ_ORGANIZATION_PROFILES instead of HZ_PARTIES.

  Update HZ_ORGANIZATION_PROFILES
  Set duns_number_c =
  where party_id =

  This should be OK...
  Vik

• Problem when writing text, including numbers in Photoshop

  When I want to write the following text in Photoshop CS6:

  5-1. Th.

  This is how it ends for research:

  . E.1 5

  For some reason, he is back.

  How can I change this?

  Watch this video about the orientation of the type.

  How to change the orientation of the text from right to left in Photoshop CS6 - YouTube

• Keyboard/mouse coursor jump when writing on the Satellite a series

  Sometimes the point of keyboard moves in another place of the text while typing. Its very strange and annoying. We find occasional and it is difficult to repeat.
  I don't know why this is happening.

  I'm trying to install the drivers but it does not help. His sometjing as the mouse cursor that is 'auto click' that is to say in this text mouse cursor was above this line and I wrote this sentence. Its impossible to write a long text without it. Maybe someone have the same problem or know what the problem is?

  Help, please! It drives me crazy, my new circuit is unusable for work and he was buyed. This only happens when writing text (notepad, word, firefox, etc.).

  BTW. Sorry my English :)

  Nothing unusual ;) happened on my laptop too. And finally I ve found out what the problem was.

  I ve just tap on the touchpad accidentally during the strike. I recommend you to disable the touchpad while typing.
  You can use the FN + F9 key to disable the touchpad for a while.

• problem in writing 8.5 GB DVD only

  I have Dell inspiron. N5010, Intel core i3, 3 GB of ram, drive 8 x DVD writer SATA L633J TSST. My problem is that I can't burn only 8.5 GB DVD.

  Previously, I had problem in writing any od the CD or the DVD then I changed the DVD burner then I started using Nero 7, which gave a mistake nullified address block, and then I started using Roxio. Roxio has worked well for CD and 4.7 GB DVD, but when I tried to burn it used to give the error, then I uninstalled and tried burning with WIndows image writer I could write 'ONLY LOCAL MADE' 8.5 GB DVD but when I tried to write Supermedium / Sony, he was in error 0xC0AA301, then I calle dell d service they updated ware closed and off Roxio in "MSconfig" but still the same problem , then they asked again to change the DVD writer (for the second time), and then I started using Roxio, I could burn 6 DVD and I was failure to burn 4 DVD and it gave error.
  CSA of sense: 02:04
  ASCQ: 08 (command 35),
  PX.dll:4.24.14.0
  PxAFS.dll:4.24.14.0
  pxdrv.dll:1.02.61 A
   
  PxMas.dll:4.24.14.0
  PxSFS.dll:4.24.14.0
  PxWAVE.dll:4.24.14.0,
  pxwma.dll: 1,0, 0, 3

  Hello DrSunilgajanurkp,

  Thanks for your post.  Review your other threads and try the troubleshooting steps that they contained and let us know the results.

  FYI, you can see your son by clicking on the name of your profile.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-hardware/l-i-cant-burn-DVD-85gb-only/e16f5a8c-6380-E011-9b4b-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-while-burning-DVD-85-GB-only/a2826df7-427A-E011-9b4b-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-pictures/cant-write-to-85-GB-DVD/c1afb936-c37a-E011-9b4b-68b599b31bf5

  See you soon

• Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

  I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

  Hello

  You use a desktop or laptop computer?

  Is the mouse a mouse wired or wireless?

  What is the brand and model of the computer and the mouse?

  If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

  If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• PROBLEM when scanning multi-page pdf

  Hello

  Since the update of the sierra, I have a problem when scanning multiple page document. If I check the checkbox "merge pdf" in the scanner window, first page works fine but when I scan page #2 or one of the more page don't merge in the file pdf which flashes briefly in the sidebar, but still with only one page...

  I tried with another scanner (diff brand and model) and the same problem, so not a driver issue...

  any idea?

  Thanks in advance

  Stephane likes

  Best I can tell with Sierra make a pdf of many a scanner using the preview page is completely broken. Time to report through www.apple.com/feedback/.

• Organization address books no longer appear on the left when writing

  A long time user of Thunderbird times. The accounts of form 4 books address no longer appear when writing email.
  It is mainly for this feature I use Thunderbird.
  How to get back to the old iteration that has worked?

  Open a window of writing.
  Press F9 to toggle the sidebar for contact.
  You can also do this in the view menu in the window of writing.

• Why firefox is always problem when I put cache 0 MB Web site?

  Hello

  I develop Web sites and about 1 month, I think that to the top of the Version 30 or 31 have problems with the cache.

  I activated the manual cache size and set it to 0MB (Web sites), but I still have problems that a site is cached.

  In development, it's a big problem, when the browser still shows you an old page. I have change something in my code, but it does not apear when I reload the page. When I opened another browser chrome for example I see my changes.

  BTW, I don't like chrome and I was really happy when I stay in firefox. But the described problem could couse me to change browser.

  Best regards and continue to have fun in dev
  Michael Topor-Grabowski

  Hello Michael,
  There are actually quite a few ways to accomplish what you're trying to do. To refresh the page without querying the cache, the simplest method is to type ctrl and f5 instead of simply typing f5 or hit the button reload. The second would be to set up your development web server to transmit the "Cache-Control: non-cache ' directive cache so that any browser you test with, (as long as it is in accordance with w3c) does not cache the hosted Web pages. The last method should be considered as a last resort, but you could also disable the cache of Firefox by activating / disabling the network.http.use option - Hide all: config to false. Remember, once you decide on one of these methods to clear your browser cache before testing again.

• When writing a new message OR reply to a message, I lost the 'Send' button AND the button "check spelling". Help!

  When writing a new message OR reply to a message, I lost the toolbar that includes the "check spelling" button AND I lost the toolbar which includes 'send '. I can't send messages! Can you help me find these toolbars?

  Open a window of writing.

  You have a Menu bar with file-Edit-View etc? If this is not the case, press the alt key to bring up.

  The Menu bar select View-Toolbars and relight toolbars missing.

  Sending is on the Composition toolbar.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  When my computer can only be upgraded to Mountain Lion?

  Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.

  

  Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.