Problem with a flash drive video on a particular Web site

Similar Questions

• I have problems with a flash drive. Nothing will pop up to open it.

  Can't open my flash drive. What can I do?

  Hi Nanaof13,

  (1) if it works well before?

  (2) remember to make changes?

  Method 1:  You can follow the steps mentioned in the link below

  AutoPlay does not start when I insert a disk or connect a device.

  Method 2: If your device is not recognized, you can run the fixit available in the link below

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Problem with the Flash drive on the computer.

  My folders on my flash drives appear flash drives, however, show have some use. When used on another computer, they are perfect. What could be the problem?

  Hello

  Have you tried another flash drive in this computer?

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then allows you to refresh the USB stack:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems with the flash drive and ReadyBoost

  I just bought a fairly expensive 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Monday, January 5, 2015, 17:34:53 + 0000, TheJimObasa wrote:

  I just bought an expensive ther 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Not an answer to your question, but let me point out the following:
  unless you have very little RAM on your computer, ReadyBoost is
  useless and will do nothing to improve your performance. Use of the
  drive for something else.

• I can't connect to a web-based gambling site no I have a problem with i e or Firefox, but a game web site tells me ii have problems of internet

  I belong to a game site map that does not use a browser to connect, I guess that this is called a web site unfounded. I can not enter it because it tells me to check my internet connect, which is good. Please help me

  Hi repkkatt,

   

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with access to a Web site. I understand it must be frustrating. But, proceed us together as a team and try to solve the problem for you.

   

  Please answer the question-

  (1) what is the exact error message?

  (2) is this problem limited to the game?

  (3) that you get an error code?

  (4) what is the name of the game?

  (5) did you make other changes on the computer?

  I would like more information about the issue.

   

  Method 1-

  I would have you look at the article-

   

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2-

   

  I would have you look at the article-

   

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1

   

   

   

   

   

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Problem with decompression after download of the adobe CS4 Web site

  File number 0218517962

  never to install CS4 after racing unpack 2 programs downloaded from the ADBESTWDCS4_LS Web site! The size of the file 7z 4 mb and ADBESTWDCS4_LS1. the application 1.2 MB file size through unpack it deal with the green bar but disappears then just CS4 never appears to reun Setup to enter the serial number, I mobile

  You shouldn't have to unpack anything manually.

  After you download the .exe and .7z files, all you have to do is double-click on the .exe file and follow the instructions.

• Problems with creating 3D photo tiles/logo for a Web site

  Hi all

  About 6 years ago, I found a great free site where you can create logos/tiles photo 3D fast and easy, with a picture or photograph.  Foolishly, I did not notice their web address and now I can't find it by tapping it, everything in the good old Google.  Fortunately, I have subscribed to Adobes Photoshop CC 14.2 version and I was wondering if you guys would know tutorials, I was able to create logos 3D/tiles for a Web site.  Or your own tutorials bit please? As it would be highly appreciated.

  The only way I can describe my created logo old 6 year/tile, is that it is 149 pixels pixels wide x 217 long and resembles a bathroom tile.  As he seems to have an invisible, internal frame that makes you think that image, is to jump on you.  If Adobe allows you to add images, on their thread with a host external photo, I'll try to add it to this topic.

  " < img src = ' http://I125.Photobucket.com/albums/p63/leosun848/Yes.jpg "border ="0"alt =" full Angel photo YES.jpg YES "/ > "

  I look forward to your advice.

  All the best,

  Oliver

  Bevel layer effects of-> & emboss.

• Problem with newest flash drive and restoring the system

  Greetings,

  SYSTEM - Windows XP SP3 with browser Firefox 5.0

  I run an anti-virus scan every day on my PC (Avast free 6.0.1023 with the updated definitions).

  Then I downloaded the latest version of the Flash player on your site at www.adobe.com/downloads/ last night but it was not installed.

  Ran a virus on the plug-in installation file and scan scan has reported that he was not able to scan multiple files because they were protected by password in archive - NEVER SAW THIS BEFORE.

  So I deleted the file from archive.

  This morning when I ran an antivirus scan everyday, he pointed out that several protected files in the last system restore point since the installation of Flash player file.

  So I tried to restore from Friday, the previous week, but the restore operation failed.

  Tried two days last month and the month before that; no notice of restore.

  Finally, I shut down the system, restore and rebooted the PC to erase all data in restore file.

  Then restarted system restore and ran the antivirus and all is well again.

  I used restoring the system previously on this computer without any problem.

  Also, I noticed the name of file to Setup plug-in is not the format of the normal name - install_flashplayer10_mssd_aih.exe

  instead of install_flashplayer.exe.

  
  I'm confused, why change a system that works?

  Thank you for your time and your help.

  Try to download installers from http://www.adobe.com/products/flashplayer/fp_distribution3.html

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Photoshop has encountered a problem with the display driver

  I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

  "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

  Can someone help me with this? IT IS URGENT!

  The problem is the driver for your video card, no Photoshop.

  Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

• Problem with Adobe Flash Player in the browser Opera

  Dear friends,

  I need your help with my 2 problems I am suffring with Adobe Flash Player.

  I'm having a serious problem with Adobe Flash Player.

  I can see via my PC "Controlpanel" I have Adobe Flash Player 11. But here I'm missing Adobe Flash Player ACtiveX 11.

  How and where can I find it and then install it?

  Finally, I use Opera Browser.

  If I go on YouTube to watch any video. When I click on any video then, green background. I can hear the voice, but shortly after the Opera around is freeze.

  Shortly after the beginning of video then its background becomes green and after a few seconds all Opera browser freez. So I have to restart Opera.

  Thank you.

  Hello

  Download and install ActiveX if you use Internet Explorer.

  You need to install plug-in if you are using Firefox, Opera or Safari.

  The following link contains detailed information: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_heading_5

  Also, after the ActiveX installation, make sure that you disable ActiveX filtering in Internet Explorer. See the following link for more details: tiveX_Filtering__if_you_are_using_Internet_Explorer_9_ http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac

  Thank you

  Sunil

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.