Big problem after recovery try upgrading the firmware, now I have "POWER OFF".

Similar Questions

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• HP DesignJet 5500uv 42 "Q1251V: System error HP DesignJet 5500uv to upgrade the FirmWare 0f0100 0001d 06

  Hello

  After replacing a failed hard drive and firmware updagrded, I want to download media, my plotter keeps coming up with code system error and warning: "0f0100 00001d 06 on/off switch, if the problem is, contact HP support. I did several times of the power switch, it still say I can't go any further. One thing I can say that current hard drive (80 GB capacity) is a little bit larger than the broken one(40gb) and not a new brand. The used firmware is S.56.07. Another problem is that "LM print head must be reinstall" several times as well (after many trials that slightly this issue). Someone has any idea I can solve this problem or solve the problem, I spent several days on this subject, really frustrated. Thanks a lot for any input.

  Binke

  Make sure you jet direct network card has the latest version of the firmware.  Use HP download manager to upgrade the firmware of the card if necessary.  I guess that works of tracer and the error only occurs when you send a job or media profiles to the plotter.

• WRT310N - upgrade the firmware fails...

  Hello.

  I am trying to upgrade the firmware on my WRT310N v1.00.4 - CA to the latest version available on the Web site, v1.0.07 build 14. But, every time I try and update the firmware, it gets 98% done and it remains fair to 98%. I left it sitting as this night, but it never ends. I tried several times, but always, it hangs at 98%.

  Someone has any idea how to get around this?

  Thank you

  k.

  Solved.

  I was using Safari on Mac. As soon as I used Firefox on Mac, he finished without a problem.

  k.

• What is caught after an update of the firmware

  I want to put the firmware on my router. I want to assure you once I have install the firmware I restore some settings. If I do a backup of the settings before upgrading the firmware and then restore the settings after that the update of the firmware will be the WEP key and SSID be restored?

  Thank you.

• How to upgrade the firmware on my router e4200

  Hello world. Sorry for the noob question, but I have been everywhere for this search.

  I currently have the name of the model: Linksys E4200 Firmware version: 1.0.04)is build 11 software version: 1.4.12100.0

  I am trying to upgrade to the second version, and up to date. (Version: 2.0) firmware. Links or how to do it? I tried to do it through my router settings under administration-> firmware update, but it will not refresh automatically. I need to find the real update file and update the firmware there.

  Any help would be greatly appreciated. Thanks in advance.

  Hi you won't be able to upgrade your router to Version 2.0, since this version refers to the material. E4200 has 2 versions of material. The firmware version you have is for the V1 E4200 and you already have the most recent. No need to look for any other update, since you already have it.

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• Cannot access prioritization of media after upgrading the firmware to Ver.1.1.28.147876

  Greetings.

  I have just updated to firmware Ver.1.1.28.147876 now when I try to access the media Prioritizacion in the main menu, it only shows the message 'waiting '. I tried to wait more than a day, and it remains the same. I have reset to factory settings and rebooted, the problem remains.

  Ideas and more back to the previous firmware? I was waiting for the new firmware improvements, no problems.

  Thanks in advance for your comments!

  Have you tried using another computer and another browser such as Google Chrome, Firefox, IE, so for insulation. I suggest try you it if you haven't. Another thing, turn off / on the router to update it in case there are few managers who changed which must be in sync.

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• E2500 - upgrade the Firmware 2.0 killed 5 GHz Portal

  I have improved my E2500 wifi router and since then my 5 GHz portal does not transmit.  My cell phone not noted in the beach.   Is this a known issue?  Ed S.

  Hello edspyhill09. Did you reset and reconfigure the E2500 after the update of the firmware? Also, try to access the user interface of the router and check if the SSID of the 5.0 GHz network broadcast has been disabled. To access the interface, click on this link:

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3676

• Tecra M8-S8011X - a few problems after recovery

  Hello

  I was wondering if anyone can help.
  This has been driving me crazy for a few weeks now.

  I have the above model and will give it to my cousin who start College and used the recovery DVDs created when I bought it all first to restore the system to a fresh out of the box state.

  The installation went well, I was invited for two recovery DVDs. The DVD Apps & drivers has not been requested or necessary.

  At the first boot of Windows XP but I had a few problems - every time Windows starts up I get a box with the title 'WARNING' and the message: ' cannot Access Volume Control! "my only choice is to hit"OK ".

  In fact all of the sound card is not found at all - in device manager only codecs are listed under devices Audio Audio Realtek High definition or whatever it is supposed to be is not listed at all - no exclamation point, no Red Cross, the system can't even it's supposed to be there.

  I tried to re - install the driver by downloading it from the site, tried DVD drivers, tried to install it manually too Toshiba and Apps... Nothing - the system never recognize it - so I have no sound.

  Also first when Windows starts the "new hardware device" Assistant come to ask to install drivers for a "PCI memory controller" - I did this 'automatically' and manually and connected to the internet and it even manually to the file where I extracted the driver files for the Intel chipset (also downloaded from the page download driver model) - manually but it always ended said that he did find the correct drivers for the hardware...

  Just for the heck of it I have re-directed the recovery discs from scratch in case something was wrong the first time - but it's the same exact results... I find myself with no noise, the error of the volume control and the list in Device Manager that the PCI memory controller cannot start becaue it doesn't have the correct drivers.

  The only information listed under it is:
  Feature: unknown
  Manufacturer: unknown
  Location: PCI Bus 2, device 0, function 0

  Any help would be greatly appreciated, thank you!

  Hello

  All I think that this is not a European model of Toshiba and that is why I first know whether the Win XP should be preinstalled.
  I think that the Vista must be preinstalled and that is why I am asking about the Win XP on this laptop however

  Just something about your problems;
  The audio problem is known to me using Win XP.
  Needs 2 Realtek sound card windows XP hotfixes/patches.
  You need to first install the AUDIO KB888111 patch before KB835221 will follow you with the Realtek audio driver installation.

  According to the memory controller PCI.
  This feature is supported only by the Vista operating system and therefore the Win XP drivers are not available

  Welcome them

• GSS108E: time to upgrade the firmware

  Hi all

  I tried to update the firmare of my GSS108E to version 1.0.0.1. The firmware is only about 40%.

  then the 'Prosafe Plus Configuration Utility"indicates a timeout.

  The "PPC utility" shows a look next to the name of the switch and always only will attempt to load the firmware.

  How can I complete the update of the firmware?

  Solution here:

  https://community.NETGEAR.com/T5/smart-plus-click-switches/Web-firmware-upgrade-for-GS108Ev3-failing...

  Enjoy.

  Summary: Enter a manual arp entry for the IP address and MAC of your GSS108E. Expect Netgear engineers to think that you are talking about the GS108E

• How can satellite A210-15Y - I upgrade the firmware of the DVD drive?

  Hello

  I want to update the firmware of my DVD RW. It is TO01 and I updated TO03.
  Is TSSTcorp CDDVDW TS - L632H (TO01).

  I have download the .zip on the Toshiba site and extract. I run TSL632H_TO03.exe
  and it appeared an autorun.bin file in the same directory.

  What to do with this .bin file? When I doubleclick it, a dialog box appears to show the program
  for .bin files to run. Why is this? I don't have any program to .bin files. The content
  File PDF of firmware does not say something special to update the firmware, just for
  run the .exe.

  I am running the operating system Vista Home Premium 32 - bit that came with the notebook.

  Kind regards
  Nebojsa

  Hello!

  I think that there is a problem with the file that you downloaded.

  I checked the page of European Toshiba for Satellite A210 driver download and I can't find the TO03 firmware. I downloaded the zip file and zip in this file is a readme file and another zip file which contains an exe file that you need to start only.

  Maybe you need to download the file again. I can't find a .bat file in the archive. ?:|

  Good bye

• How to upgrade the firmware of the display driver card GeForce 9300 M GS of IQ506? It displays error

  Simple question! I can't update the firmware of the GeForce 9300 M GS my IQ506? It shows the error message "cannot detect the hardware" during the update

  M Odded pilots of worm NVIDIA 185.85.

  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3. install & restart.

  9300M so you this driver should work for you without any problem.

• Please help in the db connectivity problem after Server moves to the location of diff

  Our database is 10.2.0.3 with 2 RAC nodes. Our database servers are MS 2003 R2. Recently, we moved our database on different servers in the other location. Say that we pitch A, B and C.
  A - the location for the database users understand me.
  B - the former location of the db
  C - the new location of the db.
  
  Location B and C are in the same city but different places. A and B are located in different cities. I was told that there is no direct link between A and C and the link between A and C must pass through B. Since the move we have experienced the problem of connectivity of database between A and C. Some users got "ORA-03113: end of file on the communication channel. For me, I constantly "ORA-03135: connection lost contact" Sqlplus or Toad if I leave my session idle for an hour or more, no matter if it uses dedicated or shared connection. We also asked our network administrator to make sure that there is no firewall between the two and we have also added KeepAliveTime and KeepAliveInterval the new db server record. We also have a TAR with Oracle.
  
  Thanks a lot for your help in advance.
  
  Shirley

  Connections this time-out when left idle for an hour feels very strongly to a firewall issue. The fact that you are going through Site B and cannot connect directly to Site c. imply strongly that there is a firewall at Site C. Since B can communicate with C, I would bet that there is a hole in the firewall allows connections between B and C. But firewalls commonly kill idle connections after a timeout: you would need to talk to the administrator of the firewall to determine how to configure the firewall to allow connections to be idle indefinitely.

  Justin