Problem with audio line in first Pro CC2015

Similar Questions

• Why does not matter the Adobe Connect FLV with audio imported into first Pro CC file?

  I have Adobe Connect recorded Webinar FLV file I want to edit in first Pro CC. However, when I import the FLV file to Preimere CC Pro there is only one video track (no audio) are both adobe products. What gives?

  Support flash in PP finished earlier.  I'm surprised that you get anything at all.

  You could try to convert the file to something PP like.  I'm sure that someone is a free software that can do the trick.

• Problem with track tool select first Pro CC

  Dear people of first,

  a strange thing happened on my new job of first CC. The track selection tool behaves oppsite to what you expect: by default, the function is multiselect and with depressed shift is just a track (single) select and displays the ToolTip under the sequence to the SHIFT to use as select multi track. Other tools work normally, CS6 normally CC also works, on the other workstation: same question.

  I did some research on the web, but couldn't find anything useful.

  Anyone have any idea?

  This is normal.  I find a useful change.  Most of the time I want to move a group of clips, I want to move them all Flickr pictures anyway.  This eliminates the modifier key to move most of the operations.

• Work with AVCHD from CANON XA20 files in first pro cc2015

  I work in a project with AVCHD files form a canon as xa20 imported through 2 different methods:

  (1) import through the barrel of the data import utility

  (2) copy the AVCHD structure files in my HARD drive

  Both methods provide the same wrong result.

  The parameters of the automatic sequence of adobe first pro CC2015 not recognize as progressive images.

  The results in the preview screen as well if I export the file is there is some obliquous apperars lines with the lines of the jigsaw and some artifacts as if the film has been interlaced, also if I manually adjust the settings of sequence as progressive.

  any suggestions?

  If I'm not mistaken the camera film progressive 25 p, but puts in the middle on the card 50i (pal) interlaced

  You must interpret the progressive film first.

  Select everything in the project window, right click, edit...

  Then proceed to the sequence.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Problems with Acrobat XI and a pro version

  I uninstalled Acrobat Pro XI and re-installed with a license key valid (as confirmed by Adope JUDGMENT).

  However, when trying to first open the program, I accept the terms and then a windo opens that says:

  "XI acrobat Pro-Testversion; Tagus 00;

  Der Testzeitraum sit abgelaufen. Sie können Acrobat Pro XI weiter use, indem sie die Software kaufen'... "

  But I already bought the Pro Version...

  Best regards

  I am locking this discussion as it continues on a new thread. Please see Re: problems with Acrobat XI and a pro asking for license key version for additional troubleshooting.

• Problem with audio on laptop Toshiba Satellite C855D-S5232.

  .. .lately I had ALL sorts of probs with audio... first helmet to quit smoking, has no longer recognized and now external speakers work not and embedded speakers continue to play static. Can you help me?

  Download and install the latest driver 'Sound' on the Toshiba support site:

  http://support.Toshiba.com/support/modelHome?FREETEXT=3386622

  J W Stuart: http://www.pagestart.com

• First Pro CC2015 update: no reading and the program hangs at the end

  I just updated my first Pro CC2015.  I can't get any video for playback at all within the program, and when I eventually leave the program it just freezes and I have to force to leave.  I use an end of 2013 Mac Pro, 3.7 GHz, 32 GB of Ram.

  It seems that he was trying to use my Logitech camera as input device and I couldn't change other parameters.  As soon as I got the Logitech camera - reading has worked well.

• How can I get my file in the time line in first Pro CC?

  How can I get my file in the time line in first Pro CC? I am using first Pro cs6 and unfortunately my labtop crashed and I lost all of my products from adobe. I wanted to check a trial version and I can't seem to find one for CS6! Please help me! My project is due tonight!

  Hi Aneumann,

  Welcome to the Forums.

  You just need to right-click on the imported clip in the project Panel, and select new sequence of the clip. You can also go to the file menu > new > sequence and create a sequence, then drag the clips after importation, in the timeline.

  Kind regards

  Vinay

• Problem with settings of camera R3D in first Pro CC2015

  Hello

  I can't go into "DEVICE SETTINGS" on my R3D files. I tried with different footages, it did not work.

  The menu "device settings" is just gray... I can not click.

  I was in RED CINE X Pro, without any problem with the MDM. Same thing with DaVinci Resolve.

  None of the files are corrupt.

  Thank you for you helo!

  iMac (27 inch, at the end of 2013)

  3.2 intel core i5

  24Go ram

  NVIDIA GeFoerce GT755M 1024

  For any clip of R3D (or another format that used to have the Source settings) imported CC, 2015, the settings feature moved to Master Clip effects.

  Excerpt from the doc for help:

  Parameters of source code available in the effect controls panel

  For RED, ARRI, CinemaDNG, DPX and Sony F65 media files, you can set the Source settings using the master tab in the effect controls panel. Previously, the settings of the Source were available in a modal dialog box.

  Summary of new features

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• Problem with audio video

  Hello

  Recently, I downloaded the trial version of Adobe first Pro CC.

  After recording a video with a friend I put it in the first to notice that the audio was falling behind the video. Lets say there is an explosion. You would see the explosion and then to 0. 5 seconds later you'd hear it. At the beginning of the video, it is not noticeable. But as the video goes on it is still worse and worse. This happened since I used it. My friend helped me with setting but it didn't help. When I recorded a 2 and a half minute video, that the audio would be nice, as soon as I record a video of 10-30 m audio falls behind. My friend suspected it could be the transmission speed of the audio. I changed my microphone, headphones and the setting sequence in the first 16-bit 480000Hz, that didn't fix it. When I discovered the original video in windows media player, it is fine. The video is recorded at 1080 p 60 fps.

  Don't forget I use that first for a week or so and only know the basics. My friend has it on his mac book and has not had any problems with it.

  I use windows 8, first is up-to-date.

  Any help is appreciated.

  Audio desynchronization means that the file has variable framerate (no flow)
  Check the file with MediaInfo Windows

  If so convert the constant framerate before importing it with HandBrake

• problem with audio export blocked at 8000 hz since AE CC 12.2.0.52

  Hello

  Today, it's a mess, I don't know if it's my iMac is dying or what, but several problems.

  I try to export a model, he has worked and today, the frequency of the audio in the render parameter is blocked at 8000Hz, when I try to use another frequency and confirm, the frequency is back to 8000Hz! I try with other audio files, but it's the same problem...

  solution?

  Here are the details of the update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  This update fixes the bug of audio sampling, as well as several other issues.

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• Problem with ProRes import in first CC in Windows

  Hey all,.

  I realize the futility of the use of ProRes in a Windows environment, so I thought I'd just get that out of the way right away the bat.  That's how I got the images of the customer and it's too to try to convert into another codec (even if I have to, I'll do it, I would just avoid it).  Despite this, I had not really a problem with this until I tried to work in CC.

  I started this project in first CS5 and has been seen no problem.  I received a few files AE in CC and decided I bite the bullet and move to the more recent and rather than try and rebuild projects in CS5.  I download, install, update, open the first to rebuild the short Assembly and then find that when I import ProRes files, all I get is audio, no video.  I can import other codecs very well, it's just the ProRes who refuses.

  I had Quicktime and decoder of QT Windows for ProRes are updated, as well as the first CC.  I currently have all my work files bundled up on a drive to take in my 04:51 and work on a Mac on my lunch break, but for obvious reasons, I would like to be able to work at home.

  This client does not provide sufficient work to justify a new purchase of Mac, and I'm just at the end of the roll.  It has worked well in CS5, why not not in CC?

  Here are my specs:

  Windows 7 Professional 64 bit

  First Pro 7.0.1 CC

  QuickTime (fully updated)

  Decoder ProRes QuickTime for Windows (fully updated)

  You can provide any assistance is greatly appreciated!

  I just fell on the same problem. Windows system, body CC 2014 and Prores files would be important only the audio. Launched QT7 Pro, reopened agency CC 2014 and Prores files imported without problem.

• Satellite P100-487: problem with audio drivers for Windows XP Home 3.11.0.51 - entered

  Hello

  I have problem with this audio drivers 3.11.0.51. The problem is that the output works perfectly but there is no entry.

  When can I expect from the good work on Toshiba support drivers?

  My way to have entry and exit works well is: first install 3.11.0.51 drivers from Toshiba site to install Support Intel 3.14.0.50 and do not restart after the installation. It's hard because every time when I restart the PC I have to for this making begin.

  Anyone have the same problem and found another job drivers?

  Thank you

  HI Supportneeded,

  You gave me the trick with the driver to resolve the problem in the next restart.
  And I replied to your thread Thursday evening at 20:30. Ask you Toshiba phone when we can expect new drivers. (I have a Satego P100-10F) I added a complaint of litte that Toshiba should also support a 'old' OS like XP. And after that at 21:00 the detachment was completely absent.

  Anyway, I tested some drivers of other manufacturers and other Chipsetdrivers, still the same problem.
  the sound with this material does not work on XP due to a rather bad.

  Of course, toshiba brings out a new driver that will feature at the end of February, but now it is March and I see nothing. (stop: a new driver for Windows Vista is online since yesterday)
  I had it installed on xp and the sound is completely down. Whether in - or output.

  you already called toshiba support when they expect our problems?

  Greetings

  [Edited by: admin on March 17, 2007 17:03]