Problem with ProRes import in first CC in Windows

Similar Questions

• Dropped audio at the end of one. File VOB (problem with the import. VOBs, I guess)

  Here's what I did. I created several DVDs by recording VHS videos for them. I copied these DVD on my PC, giving me dozens of DVD files with. VOB files in them. I imported the. VOB files for each DVD in Premiere Pro sequences, but still get (which means that every time) dropped audio since the last images of each. VOB file in the sequence. So, in between all of them. VOB file in a video DVD full, there is a very brief break in audio. To be exact, the audio is 'cut' last 13 executives of each. VOB. However, the start of the next. VOB in the sequence begins with the audio as it should (at the very 1st picture). Video is not cut at the end of each. VOB and usually the transitions in the next. VOB smoothly, with no problems. However, occasionally, the latest image of one. VOB looks "glitched" (imagine two sequential images overlapping each other, but within a framework... so that you can see two of the same person who overlap who move from the 1st to the 2nd section). When this happens, the start of the next. VOB file in the sequence is largely pixelated for the first 2 or 3 images.

  I guess it's a problem with the import of first Pro CC. VOB files (she just can't handle.) VOBs). I would like to know if anyone has had a similar problem, and if you have found a solution.

  It is a long-standing problem.  Here's my work around.

  http://www.videohelp.com/software/XviD4PSP

  (Download version 5, not 7.)

  

• How to solve the problem with slow import mxf files exported from first cc?

  Hello!

  I'm working on the first update to 7.2, on 64 bit, windows 7, and I have a problem with the import of the MXF op1a (IMX 30 PAL) files that I exported from first.

  MXF Import blocks especially first, but when he's not, it takes a long time to import (10-15 min).

  I tried editing ContributeQ but again, it hangs / takes a long time and I can see only a black screen.

  I installed a new copy of windows on this computer with everything clean, but it doesn't seem to work.

  Is there a software patch or way to go around for this problem?

  Whenever you have trouble with this, reduce the number of influences of others on your system.  In this case, delete TotalCode and see if it behaves better.  If it does not remove the device from BlackMagic and uninstall the drivers.  If one of these steps will improve performance, check with the third-party manufacturers.  There may be a setting or an update is necessary so that your system works correctly.

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Recently, I had a problem with the import of my photo, s of a Nikon d700. I found an update to 6.2. This means that if you are a user of cloud there is no automatic update for yourl Lightroom?

  recently, I had a problem with the import of my photo, s of my Nikon d700. I found an update to Lightroom 6.2 does that mean that if you are not a user of cloud there is no automatic update?

  Hi johnp,

  • Want to sure that your applications to be updated automatically without any prior notifications for new updates?
  • If you are a user of creative cloud or not, if Adobe has an update for your product, then you would be notified for the same and then its your choice to update or not.
  • Are you always facing a difficult when importing images? If so please help us with the following information to improve assistance:

  1. the current version of Lightroom

  2 operating system Type

  Concerning

  Sarika

• Problems with sound, imported weird noise

  Hello everyone, I do an animation in Flash CC and I had problems with the import of sounds.

  When I try to import sounds in the library, it appears on the timeline, when I press Enter to display the preview, the only thing I hear is a horrible and loud, as static noise, stop doesn´t until I'm close Flash. But if I press cmd + alt + enter it generates the swf file and I can hear the sound normally.

  I really Don t know what to do, or how to fix it. I will really appreaciate to help thank you very much.

  Either way, I use a Mac. I've recently updated to the Mavericks. I didn t use flash before so I don't know if I already had this problem. It was an mp3 file I imported

  Post edited by: FrancoM

  Hello

  Try updating your Flash CC using the menu help-> updates or using creative application of cloud. A fix for this issue is already out in the last update (13.1.0.226).

  This has been reported to occur after the Mavericks for update only on Mac.

  Let me know if this does not solve your problem.

  -Mabrouk

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit.

  I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit. Whenever we try to open the computer software crashes, we deleted the lock file and reset suggestions as suggested, without success. We have uninstalled and reinstalled the software without success, still the same problem of crash

  If all of the computer crashes, it's a hardware malfunction or a bad/corrupt/old video driver.

  First install/reinstall the latest driver for your graphics card. If this does not help, then you need run diagnostics on your hard drive, memory and also make sure that the fans are cooling the CPU correctly.

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Problem with blocking to the bottom of the window.

  I have a problem with my laptop, when I stopped the Windows Xp sp3 professional, he cant turns off. Blue screen Windows is blocking down... and stop on this screen. To disable I must press on & press and hold the power button / stop.

  Which can be a problem?

  Did you get that started after the installation / uninstallation of a whole new software? You can also checkhttp://support.microsoft.com/?kbid=307274 for more information...

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• Problems with audio imported in PE4

  Hello

  I've been using first Elements 4 for a couple of years now without any real problems, including the importation of the soundtracks in my projects.  In my last project, I imported 2 audio files of 100 haircut and the Black Eyed Peas (even though it's probably not relevant!).  These 2 files play fine in itunes, but when I import into the project, they stutter on playback.  Here are some facts that might be useful where I tried already different things after watching the forums:

  1. the audio files have .m4a file extensions which I believe is a Quicktime movie. The properties of the source audio clip form shows that - 16-bit - 44100 Hz stereo

  2. the audio format of project is 48000 Hz - 32-bit floating point stereo

  3. the original audio/video input of my camera (Canon HV20) was in video high definition

  4 there is no red line showing in the timeline section of the soundtrack where imported files or in the audio section of the movie imported from my camera

  5. the clips stutter in PE4 before even they are trained and fallen into the timeline, that is if you open from the sections of organiser or project

  6. I shot in other audio files in the project that are .m4a and they seem to work ok

  7. I tried to cut the audio on the original video to see if that was who collide with the additional soundtrack but that made no difference

  Anyone can shed light on what I'm doing wrong?

  Thank you very much

  Martin

  music of iTunes used to have built-in software that would lock usage in a video editing project. I think that Apple has relaxed a bit- but it cannot always be fully compatible in its native format.

  Try to download the free program Audacity - a program call in my books of Premiere Elements a must - have. If you open the song in Audacity, you will find the option to save it as an MP3 or WAV.

  Try to convert your iTunes stuff a WAV before put you in Premiere Elements and see if that solves your problem.