Problem with Canon 7 d images when editing

Similar Questions

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.

• Problem with Photoshop CC 2015, crashes when you click PRINT

  Hi all, I have problem with protoshop CC 2015. When I click on 'print', photoshop crashes. It happens when I am trying to print pictures that I printed before. New images work fine. It seems that there is save the settings to print on these images and photoshop can not find them because the printer driver has been reinstalled. How to solve this problem?

  The HP printer driver crashes - so HP is the only party that can help you, because they have to correct the bug in their printer driver is the cause of the crash.

• Now, I have a problem with my domain name, and when I want to publish my site I can't, when you're looking for my website address, you can not found

  Now, I have a problem with my domain name, and when I want to publish my site I can't, when you're looking for my website address, you can not found.

  Hi Esther.

  Are what problem you facing your field?

  What problem face you with the edition?

  Kind regards

  Aish

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  Go install the updates to Photoshop CS5 - you have not installed one any of them, and the first update solved the bug of printing that you are experiencing.

• Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Hello

  I suggest you fine the link below and it will help you.

  Does not open App | Wheels of progress turn continuously

  Concerning

  Maansee

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• I have a problem with Canon PowerShot SX 60 Hs-camera with Camera Raw, I can not open the photos taken in raw mode. How can I update Camera Raw? I also tried with Photoshop elements 13, but it was the same thing, I could not open pictures.ts 13 gross

  I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop elements 12, cannot open raw files. I have the latest version of camera Raw plug in, what is the problem?

  It's on our radar and hoping to incorporate it in a next update.

  As soon as it is available, it will be updated in the article.

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  ~ David

• I have a problem with the calendar missing in when I brought my production files.

  I have a problem with the calendar missing in when I brought my production files.
  
  Hi, I brought my files on production server by dumping my production test folder. I brought my whole file it.
  
  This is a calendar of java script.
  
  In the test server, it works fine.
  
  The calendar written in java script is here. But when I managed to put in production the calendar disappeared.
  
  I'm still new to this, infact it's a fixed quick. I got the parts together.
  
  
  Advice on how I can get it from test to production the same way running server.
  
  I appreciate your help.
  Thank you
  

  Seems to get more acquainted with how ColdFusion is installed on your production system. You might find web root under a directory like/inetpub/wwwroot/and are usually directly above where you ColdFusion templates are located. Can't speculate as to what 'reader' it would be, as you didn't say if you're on UNIX, Windows, MAC or Linux, etc., not that this would help a lot. Who configured your server, or at least who is the administrator or webmaster? I would like to have a conversation with him or her.

  Phil

• problem with the position of image in the slideshow width 100%

  Hello Im having a problem with my slide show that is 100% browser width.  the slideshow container is set to a height of 300 pixels and the picture I inserted is about 1500 pixels in height.  I placed the image so it defined in a specific section of the image, but when I hit the 100% width button it positions the image down.  is this a bug or it's adjustable somehow?

  Hello

  What you encountered is the default behavior of the slideshow widget, which, once the value of width of 100%. I'm afraid at this point, you can not edit/resize the image. So, to do the same thing, you will need to remove the 100% width of the widget option.

  You may want to file is like a feature here request: ideas for features in Adobe Muse

• Problem with the Apple Core Image?

  Can someone confirm for me that there is a problem with Apple Core Image which has feature to DNG. I have problems with Nikon RAWs converted with DNG Converter. Once changes have been made to these DNG (in Lightroom 2.3) and the metadata and previews updated software (Preview, etc.) based on the main Image don't seem to use the embedded JPG (with applied adjsutments) but well the smallest thumbview, not up-to-date. I do not use the option "convert to linear" when converting.

  >... but Apple OS uses its own rendering system (part of Mac OS) to display

  > previews in Finder. It is completely independent of the melting of LR,

  > or LR of embedded previews.

  Hi Eric - so a software program that uses Apple CoreImage to render a LR

  "adjusted" DNG will be or does not display a picture of the DNG that has been

  cropped.

  Will not. In general, LR settings (e.g., cultures, fill light, etc.) are not

  applied by Core Image. These types of adjustments are specific to each flood

  converter.

  Eric

• Problems with the opening of attachments when the user has restristed privilege to run executable code from Program Files and Windows folders.

  I'm trying to prevent users from running potentially dangerous files. According to the Windows policies so I put. Users can run any application Program Files, files (x 86), windows, and folder to all users of the program office. Users have no permission to write anything in this files. When the user double clicks for example document.doc on his desk - document opens fine with MS Word. But when the user tries to open this document in attachment directly (by selecting open with MS Word, instead of the economy) - he sees an error - "this action is limited by local politics. Ask your system administrator. "(not exact text).

   So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
  

  Thanks in advance.
  Calvo is serious.

  PS Sorry for my bad English. It is not my mother tongue.

  Thanks for responding.
  I discovered what was going on.
  This strange "bug" affects multiple computers with Windows 7 Ultimate in my case.
  When you create a SRP (software restriction policies) it creates two rules by default to run programs: windows folder and the Program Files folder. I manually add "C:\Program Files (x 86)" in places without restriction. BUT Windows and Program Files folder to default rules directly, but through registry keys. And this part seems difficult. You CAN run the executable files of Program Files. You CAN run the Program Files (x 86) executables. But if Thunderbird or Firefox try to run MS Word or excel or editor for.doc or *.odt opening or another file - downloaded files running programs blocked by SRP.
  In order to fix this, simply replace the rules for indirect paths like % HKLM/software/microsoft/windows... etc % with direct, for example "C:/Windows" and "C:/Program Files /". After that, everything works fine. Attachments and downloaded files automatically opens without a problem.

• I have problem with my iphone 6 s when I want to download on AppStore or go to error code wiil online games just 1009 I don't no what to do? Please help my ios is 9.3

  I have problem with my lphone6s when I want to download or go online or on wifi error come (code 1009) Please help I don't know what to do?

  1009 error means that you are trying to download on the app store in a

  country other than the one you are located in or from one another AppStore

  that you have an account. That error can also mean that you

  are in a country that is blocked.

  In which country are you physically located? In which country is your

  iTunes account? Which store AppStore/iTunes to the country you are

  try to download from? What VPN do you use?