Problem with combo box properties

I'm not sure if this is a recurring event, but I have a list of items in the list of items in a drop-down list box. They each have a different export value. I have not had any problems to make the list, but when I try to come back to edit an item on the list, that he refuses to answer. When I click on an item, it automatically brings me bang on the first element: s. it's really frustrating when you made a mistake and you have to redo several lists with more than 30 items + export values. No one knows why this is happening or even a solution to this problem. I use adobe acrobat 9 pro Presentation If that's any help.

This happens because you have set up two (or more) elements with the same

value of exports, which is not a valid situation. A solution would be to change

the list so that it is no longer the case.

Tags: Acrobat

Similar Questions

  • M200 problems with the file properties

    M200 with a GB of memory and all the usual gubbins. Recently applied SP2. also, I tried (without success) to uninstall this P in sw A Norton anti-virus. I usually prefer a combinaiton of McAfee and Zone Alarm 2

    Problem is that when I try and select the properties of a file (that is send via an infrared connection or attach it to a message recipient), the crashses of the Explorer window. I find myself also get accidents such as

    Delay (30000 milliseconds) waiting for a response from the WZCSVC service transaction.

    I thought at some point it might be a problem with ZoneAlarm but who have turned off with no improvement.

    Any ideas?

    Hello

    I don't know, but as far as I know you can remove the Norton if you check all entries in Add and remove programs in the control panel. One of my friends told me that there are a few entries, and you must be lucky to pick a good one. As TOS said trying to work through.

  • Problem with Council box using VMWare-KVM

    I asked this question in the player forum of work stations, but there doesn't seem to be anyone there know about VMWare-KVM, so I hope for more luck here.

    Re: VMWare Workstation 12.1 player when I start a virtual machine using VMWare-KVM I am constantly presented with the message box "press pause to switch between virtual machines and the host - show no suspicion again." I tried to check "do not show again suspicion" but this has no effect. I tried the deselection of VMWare-KVM - preferences. Once again no effect. I imagine that there is a line that I can add a...\roaming\vmware\preferences.ini which will disable it. Does anyone know what would be the format for this?

    Thanks PBreeze

    Hello

    Welcome to community work station!

    I'm sorry. I think it's a bug in vmware-kvm on Windows 7. I can reproduce the problem on Windows 7 with 12.1.0 Workstation. But it works well on Windows 8.1.

    Temporary workaround configures it in the preferences file you mentioned. Add below line to % APPDATA%\VMware\preferences.ini:

    hint.vmkvm.usageHint = "FALSE"

    I'll report a bug of product for it. Thank you for bringing This problem to us!

    Kind regards

    Shawn

  • Annoying problem with text boxes

    I want to create a text box with the white fill color and black text. The entire box is an opacity of 0% in normal mode and in overturning it would be 64%. Everything works correctly if the text font is Helvetica for example. But if it's Chin (what I want) it does not at all. The box is an opacity of 100% in all modes. Then I turn it on in Helvetica and it works very well... again. No other changes (!) Now, I really want to know what is happening with that.

    Corbel is a web font or a font for the Web. This is why it must be converted into an image when released.

  • Problem with IE box put white behind the spry navigation bar

    IE is also distort menu nav bar boxes in a different random order as well as to a white box behind the spry navigation bar.

    All works fine in Chrome, Safari, and Firefox.

    Does anyone know how to solve these problems?

    The site is http://www.phonicsfaster.com

    I would really appreciate help.

    Thank you

    FM

    Do you want to say just do a div boxes style line as I want them to look in a row? What method would you use to make the color change and also enable it to have a direct link? In DW I usually use image swap behavior for a change on mouse over.

  • Problem with the Page Properties window

    Page properties window is too small oppening. I can't access right margin, bottom margin, page fonts unless I use tab, but I don't see what I'm typing in the box. If I drag the bottom right to enlarge the window, it only moves the menu category, appearance does not move. Please help me.

    Watch the video below.

    3.JPG

    This marker, as supposed replied.

  • Problem with text box on the Page Master application to other pages.

    I've done this before with success, but maybe I'm missing something and don't have the time to waste on this one there...

    I applied a text box to the master page. I applied the master page to all the other pages, but on each page, the text box will appear like this:

    Picture 1.png

    I can not type in the text box or select or something. I have a go back to the Page Master and the text box is a-okay.

    What I'm missing or doing wrong this time?

    Me once again and I have the solution!

    1. place the text boxes where you want on your Master.

    2. go in the 'Pages' Panel and highlight all the pages.

    3. in the "Pages" options of the sliding panel, choose "replace all Master Page items.

    Now, all your pages have a floating text box!

    See you soon!

    Mikey

  • RH2015 problem with text box placed remaining in Place on the Image

    Using RH2015 I find a text box placed over an image and set a trigger of the text in the content to the top of the image page to display / hide the (effect) positioned text box when you click on. The issue I see is that the text box is not positioned compared to the image on which are superimposed. Is the placement of a text box positioned compared to the outbreak, in this case, rather than the image you like? I use a reagent HTML5 output would therefore have a solution that would elapse from the position of the image and the changes in scale, remaining anchored.

    Hello

    What is the ultimate goal? Click on the image and see the text?

    I ask because there may be a better way to achieve the goal.

    Personally, I have never had anything but bad using positioned text boxes.

    See you soon... Rick

  • I have a problem with a box that keeps going on my menu when it scrolls down, and I tried everything. "Send backward", recreate the box, etc. Help, please

    The box continues to go on the menu when you scroll, I sent the box back and the bar menu at the front, etc.. Help, please!

    Hi Emily,.

    Please check the placement of this box in the layers panel.

    Kind regards

    Akshay

  • Have a problem with black box appearing on dreamweaver and do not allow me to continue to work.

    Screen Shot 2015-10-02 at 9.28.17 AM.png

    This embarrassing black box appears in dreamweaver and stop my progress, I have to restart dreamweaver everytime.
    Want what you fixed.

    Computer: iMac

    OS: El Capital 10.11

    Looking at the original screenshot of bryan.rohrer, that he was using an old version of Dreamweaver which has panels BrowserLab and Business Catalyst. These two have been suspended. If you have the same panels open, try closing them. In addition, if you use El Capitan, follow the advice of Nancy and update your graphics drivers.

  • Problem with statement box

    I am trying to execute the next case statement:

    Select * from < table name > p
    cases where when: startDate is not null and: endDate is not null
    then (: startDate is not null and: endDate is not null and (greatest (p.create_date, p.update_date) between to_date(:startDate) and to_date(:endDate)) ou (: startDate est null et: endDate est null))))
    When: startDate is not null and: endDate is null
    then (: startDate is not null and: endDate is null and (greatest (p.create_date, p.update_date) between to_date(:startDate) and current_date) or (: startDate is null and: endDate is not null))
    another (: startDate is null and: endDate is not null and (greatest (p.create_date, p.update_date) < = to_date(:endDate)) ou (: startDate n'est pas null et: endDate est null))))
    end

    I get an error stating that "ORA-00907: lack the right parenthesis" but I checked that each opening parens has a closing one. If I turn each of the cases, by themselves, (but not in a case statement), the query works fine. Has anyone seen this problem before?

    Thanks in advance.

    Try something like this, not tested, but should give you an idea about what is missing:

    select *
from    p
where 1 = case
          when :startDate is not null and :endDate is not null
          and (:startDate is not null and :endDate is not null and (greatest(p.create_date,p.update_date) between to_date(:startDate) and to_date(:endDate)) or (:startDate is null and :endDate is null))
          then 1
          when :startDate is not null and :endDate is null
          and (:startDate is not null and :endDate is null and (greatest(p.create_date,p.update_date) between to_date(:startDate) and current_date) or (:startDate is null and :endDate is not null))
          then 1
          else
            case when (:startDate is null and :endDate is not null and (greatest(p.create_date,p.update_date) <= to_date(:endDate)) or (:startDate is not null and :endDate is null))
              then 1
            end
          end
  •  
		     
    Problem with instruction box (order by case expression)
     
			 Hi friends, I'm stuck in a strange problem. My query is like below
    

    OPEN FOR Cursor_prnt_req
    SELECT
    LTRIM (to_char (sprq.stit_numb)). ' - ' || substr (IH. (Name, 1, 35).
    sprq.event_key,
    sprq.planogram_key,
    TO_CHAR (sprq.request_date, 'HH12:MI:SS') requested_time,-asked on time
    TO_CHAR (plano2.desc2) desc2,-department
    TO_CHAR (plano2. Desc4) desc4,-in subcategory
    CASE)
    SELECT sp.status
    OF v1sprq01 sp
    WHERE sp.event_key = sprq.event_key
    AND sp.planogram_key = sprq.planogram_key
    AND to_char (sp.request_date, 'YYYYMMDD') = to_char (sprq.request_date, 'YYYYMMDD')
    AND ROWNUM = 1
    ORDER BY sp.status ASC
    )
    WHEN 'R '.
    THEN "ready."
    WHEN 'P '.
    THEN 'print '.
    WHEN THE A '
    And THEN "pattern".
    Status of END,
    CASE)
    SELECT count (DISTINCT planogram_key)
    OF v1sprq01
    WHERE stit_numb = sprq.stit_numb
    AND to_char (request_date, 'YYYYMMDD') = to_char (sprq.request_date, 'YYYYMMDD')
    )
    WHEN 1
    THEN "N".
    ELSE 'Y '.
    END dual_sited
    (
    SELECT MAX (request_date)
    OF v1sprq01
    WHERE event_key = sprq.event_key
    AND planogram_key = sprq.planogram_key
    ) latest_requested_time,.
    CASE sprq.status
    WHEN THE A '
    THEN "N".
    ELSE 'Y '.
    Printable END
    Of
    v1sprq01 sprq,
    dplapro1.ix_spc_planogram plano2,
    dplapro1.ix_spc_product ih - Ver 1.1
    WHERE sprq.event_key = plano2.dbkey5
    AND sprq.planogram_key = plano2.dbkey
    AND sprq.status IN ('R', 'P', the from ')
    AND sprq.stit_numb = ih.ID
    AND sprq.store_key = p_dbstorekey
    AND to_char (sprq.request_date, 'YYYYMMDD') = to_char (SYSDATE, 'YYYYMMDD')
    

    UNION
    

    SELECT
    LTRIM (to_char (sprq.stit_numb)). ' - ' || NVL (substr (IH. ((Name, 1, 35), cm).
    sprq.event_key,
    sprq.planogram_key,
    TO_CHAR (sprq.request_date, 'HH12:MI:SS') requested_time,-asked on time
    "& nbsp" desc2,-Department
    "& nbsp" desc4,-in subcategory
    "No direct Plan."
    N AS dual_sited,
    (
    SELECT MAX (request_date)
    OF v1sprq01
    WHERE event_key = sprq.event_key
    AND planogram_key = sprq.planogram_key
    ) AS latest_requested_time,
    "N" AS printable
    Of
    v1sprq01 sprq
    LEFT OUTER JOIN dplapro1.ix_spc_product ih - Ver 1.2
    WE (sprq.stit_numb = ih.ID)
    WHERE sprq.status = ' don't
    AND sprq.store_key = p_dbstorekey
    AND to_char (sprq.request_date, 'YYYYMMDD') = to_char (SYSDATE, 'YYYYMMDD')
    

    ORDER BY
    requested_time DESC,
    desc2 CSA,
    Desc4 CSA,
    latest_requested_time / / DESC
    ;
    

    When I compile my inner... I get an error ORA-00936: lack of expression (it points to the first case statement) but when I take the ORDER BY clause, it works very well.
    

    Can ne1 plz help (I tried google, but which did not help at all)			 
    Hey Suman,
    

    Order preference allows for the display of your need, or to access the data in a cursor in your SQL, a sort order is not necessary in cases and case statement does not support order them by in anyway.
    

    * 009 *.
    		   
  •  
		     
    Problems with text boxes appear in the browser as image files
     
			 
    Instead of text, I can highlight, I get photo files on my site. . PNG to be exact. I'm not sure what I'm doing wrong in the muse. www.logicstreamnews.com is my site, it's getting close or ready, always ongoing. Any help would be great appreciated.
    			 
    It's because you are not web fonts, but the system that are displayed as an image online.
    

    When you use your font in muse, you have here the categories: web fonts, standard fonts, system fonts.
    

    Do not use the system more, if you want to have blocks of real text on the Web site.
    		   
  •  
		     
    Problems with the propertie recognized in WCS
     
			 
    Hello
    

    I have a problem with the ACK propertie in the WCS. I check a logg entry in the logg with the receipt, within a few seconds/minutes/hours this alarm disappear, and then if this alarm appears again, this message show marked ACK.
    

    Should not the message again without significant acknowledgement? What is the problem?
    

    Thanks in advance
    			 
    Hello
    

    According to also which is indicated in the official guides, this seems to be the expected behavior:
    

    '' You acknowledge receipt of the alarm to prevent it from appearing in the alarm summary page. The alarm remains in WCS and you can search all the alarms that are paid using the alarm search. »
    

    http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0event.html#wp1229996
    

    So, you can accuse reception that specific alarm once do not show on the alarm page, only for this event. If however the alarm goes off again, the new instance will appear and let you know that you already recognize a similar instance.
    

    Hope that clarifies the behavior,
    

    Fede
    

    --
    

    If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.
    		   
  •  
		     
    By clicking on "remove properties and personal information" does not open the dialog box 'properties to remove.
     
			 
    Hi all!  I'm new here.  Hope someone could help me with my problem.  I'm using Windows 7 Home Basic x 64.
    

    For any file that I did a right click to view properties--> select Details tab--> click on "remove properties and personal information. I do not see the Remove Properties dialog box will appear. Instead, refreshes just the Properties window. I restarted my laptop already, but the bug does not go far.  Tried to ask for help from my laptop to the manufacturer and they told me to reinstall the OS, I did.  But the bug is still there.
    

    Could this be something to do with my registry?  Tried searching solutions in other forums / Speakup, but found none.  Would really appreciate your help.  :)
    			 
    Right, I've now solved my problem.  Somehow, obtained data stripped of these two keys:
    

    
    

    

    HKEY_CLASSES_ROOT\ * \shell\removeproperties
    

    HKEY_CLASSES_ROOT\ * \shell\removeproperties\DropTarget
    

    
    

    

    Those who have problems with the "Remove properties" dialog box might try to check these keys, which must contain the following data:
    

    

    
         
    
    

    [HKEY_CLASSES_ROOT\ * \shell\removeproperties]
    

    "ProgrammaticAccessOnly"="Apartment".
    

    
         
    
    

    [HKEY_CLASSES_ROOT\ * \shell\removeproperties\DropTarget]
    

    "CLSID" = "{09a28848-0e97-4cef-b950-cea037161155}".
    

    		   
    •  
          
    Maybe you are looking for