Problem with connection of resizing boxes in Captivate 5

Similar Questions

• Problem with the click of boxes in Captivate 7

  Hi, I have a problem with boxes to click and how they advance to the next slide.

  I have a mixture of several buttons and different boxes click on a slide (one to open a pop - up, one to play some audio, one for closing the popup box, one to move to the next slide, etc..). I want you click the slide advance only when the "next" click on the box, but when the slide works it's duration, the boxes to click will advance to the next slide.

  I need all the boxes to click to be active and extend until the end of the slide. They have all of the selected actions, and none of them are set to "continue".

  I tried with only the box click pause button "Next" the blade until it is clicked and deleted property break the rest of them, but I always have the same question. I've attached a screenshot of the timeline. Any help would be greatly appreciated!

  

  Buttons to release the playhead as well, please check it out. He is not the type of interactive object that is important to free the read head, but the type of action: simple action will always come out the read head

  Try it: insert a text container with the cpInfoCurrentFrame system variable on a slide. Put a button, a form button and a click on this slide with the same action as easy as showing a previously hidden object. The slide will pause at the first point of suspension, but will be released when the user clicks on one of the interactive objects. I wanted to correct that information, for you and for other users.

  And regarding the grouping, watch this video: Advanced actions in CP6?

  Lilybiri

• I have problems with connecting by Modem DSL Siemens SpeedStream 4100.

  I have a little problem with my modem. I have a strange situation in which my internet goes several times a day (about 50-200 a day / every 10-15 min). I can't find the answer as to why this happens, however I noticed that whenever I get a phone call, my internet will. So that I get my signal back I have to make a phone call, so I just call my house to get a busy tone. My internet will come back without a doubt, but I don't think it's fair to make this happen. What could be the reason for these problems and how I could fix them? I have a PPPoE Setup so I am connected through a router, however, this problem happened a long time ago (I don't remember if it is since I have the modem). I'm in a laptop, but the question that's happened since a direct link between the modem and my desktop via cable Ethernet.

  Its been years and I have still not found a reason as why it happens. I know several people who have the same problems as me, and I would like to have days when my internet doesn't go away every 10-20 minutes. Any suggestions why this is happening or how to fix?

  Thanks, best regards

  Paul Zapata

  http://en.kioskea.NET/forum/affich-19259-router-disconects-when-phone-gets-used

  Read the above.

  Do you use a junction box on the phone, including extensions of each phone?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here are the General news when Internet is de-energized;

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• software interface problem with "Band in a box."

  s PG music "band in a box" software having problem with El Capitan 10.11.3 operation?

  FWIF it there a number of Mac Audio products who do not appear as 10.11.x and normally I would say that the developers have months to understand, but there is only tools 10.11 maybe the question that companies like Line 6 the whispers have blogs of developer who said they worked with Apple but do not have a satisfactory solution. In the meantime, see if your product needs an update and that you are running a compatible version, otherwise consider do backward to a previous state of the BONE where the software worked properly if you have a backup Time Machine to restore from available for you.

  Use Time Machine to back up or restore your Mac - Apple Support

• Problem with connection for ePrint

  Hello
  
  Today, I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but I have a problem with ePrint.
  In practice, the printer is connected to my wifi at home and I can print without USB cable with no problems. But when I want the ePrint of installation function, I get an error that the printer do not have any internet connection and I can't complete the configuration of the service.
  
  Do anyone know how I can eliminate the problem?
  
  Thank you
  Denis

  Hi DenyKr,

  I see that you are having problems with your printer, connecting to web services.  I would like to try the following steps.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds, then try again.

  Let me know how it goes.

• I have a problem with connecting to Skype, get error code 1001 on my event viewer

  I have the latest version of Skype installed and have not been able to connect. I had Skype for over a year and my computer has developed a problem with a memory stick and after that I came back from the repair shop, it didn't work. They had removed Skype from my system so I reinstalled and cannot connect.

  And this is related to the Windows XP files, folders and search for how?

  Ask here:

  SKYPE FORUMS:
  http://Forum.Skype.com/

• Strange problem with connectivity

  I had this problem with one of my computers I'm trying to connect to my router ea6500. I have several wired devices and wireless but who are working very well, the router gives me the questions recently and I had to get back to the form of the plant. Once I had setup the configuration again, one of my computers which had run fine before has an interesting question.

  The computer appears in my router with it's normal internal IP address. And my computer is saying that it is correctly connected to the internet. The question? It is not. All my other computers and devices are excellent connections without interruption of service whatsoever. No idea what could cause this kind of problem?

  After crossing, my pilots had messed up a stored parameter which was preserved through updates to pilot. I had to uninstall and reinstall the driver for my machine to fix manually Ethernet controller.

• Pavilion dv4-2170-us has problem with connection light display

  The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to

  show anything.  Sound very, very delicate.

  Is this something that can be fixed by a tech or should I get a new laptop?  I'm asking because there is another nother

  problem with function of my computer.

  HI @compugirl ,

  I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.

  Want to know if this could be fixed by a tech.  The short answer is Yes.  Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.

  It may just be a connections loose as you said, either a bad connection cable...  The cable may have become defective through the opening and closing of notebook, during normal use.  Please note Chapter 4 page 27 for the removal of the screen procedure.  Before considering the replacement of the screen, I would try a new cable first to exclude it.  You should be able to buy the cable to any computer supply store.

  I hope this has helped.

• Problem with connecting to Windows normally

  OK, so I'm having a problem with a record in my laptop normally and the only way I can get to it is by going to safe mode.

  Basically what happens is that whenever I try to connect my computer normally (not in safe mode) I'll type in my password press enter it will come with the welcome sign and this small circle that tells it to load but it never is as if this drive does not work because the lamp flashes not or anything like that. However, it is very well whenever I login in safe mode and that the laptop came with windows vista on it that I don't have a copy of windows vista to try and slove the problem. This problem acerd after I restarted my laptop because it was slow and contributing generally to make it work properly again, but now this has happened and I don't know what to do.

  If someone could help me? I really need my laptop back to normal because right now, it's my only access to internet that not working I really on heavly for my college.

  Thank you for taking the time to read this and thanks for teying to help me.

  Hi Lexiey,

  A. recent changes made on your computer?

  B. you get any error message?

  You can start in safe mode, and then you put a computer to boot and then restart the computer in normal mode controls whether the issue persits.

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer in normal mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• problem with moving and resizing windows

  The last time using my my computer windows 7 I can't move the windows. (I use every day because it is mainly for my work/accounting. Just now not a lot of work). Any time, I take the upper edge with my mouse it fills the entire screen. I try again and again same problem finally, that I get it until the next time. When I try to resize anything happens. Then when you use Word, I click on round top of page logo for print or save etc. He left the program.

  I will try the solution proposed here to shoot trouble the mouse too. It's an old Logitech wireless with a docking station.

  Most of the time I use my computer with Vista Ultimate.

  It is clear that double click occurred sometimes when you use the left button of the mouse.
  First of all, in Control Panel / mouse properties trying to adjust the speed of the double click on the tab buttons.  If the problem persists, try a different mouse.   This problem is sometimes a hardware problem with the mouse itself.

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Problem with connecting to Essbase

  Hello

  We have recently updated to 11.1.2.4

  Since that time we see some questions intermittently while trying to connect.

  We use a user admin native directory connect you to MAXL to run scripts. This keeps failing in between and then if we're going to restart the job, it runs without any problems.

  We have checked through the SharedServices_Security_Client.log and found that, around the same time of the failure, there are a few mistakes here.

  Construction of the cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  Has failed to unify the Group cache. NULL. Refer to the log file security of the Shared Services for more details.

  
  

  Does anyone has any ideas on this.

  Do you think that the problem is related to the connection attempt to time to "unify the cache?

  I think that we have a framework to refresh Group cache every 60 minutes. is it a good idea to change that at one time in a day interval

  Thank you.

  Tom Thomas

  Usually it is not a problem with Aboriginal groups unless there is a huge amount, CSS JVM info is on https://blogs.oracle.com/pa/entry/epm_11_1_2_how1

• Problem with the new text box - large size

  Hello

  I have a problem with InDesing and just can't understand why it's happening.

  When creating the text box (frame), I am selecting the text tool and want to drag a new text box, InDesing creates a new frame with size 1221, 058 x 1221, 058 mm (always, no matter what...). When I'm typing in it, the text is invisible, in the same way that it is out of reach of the size of the image (at the bottom right I see the Red Cross). It happenes even after hitting only one character and I can't make it visible (adjust to the right).

  Someone has any suggestions how to solve this problem?

  I will be grateful.

  System: Win 8.1

  InDesign worm. : output 2015.4 CC / 11.4.1.102 x 64 build

  Best regards

  Andrzej

  

  First try: 101 troubleshooting: replace, or 'trash' your InDesign preferences

• Problem with moving and resizing effect without stopping on the keyframe

  I move and resize a superhero in the cloud (see video), but the superhero continues to go after the last keyframe.  I just don't understand.

  Video display: problem with automation pos-scale - YouTube

  (don't mean to double post but the last message I have on it seems to have disappeared)

  I'm not to my editor at the moment so I can't be too specific, but I don't know that this is because key frames without being linear, they may have a Bezier curve that will make them to overshoot. If you right-click a keyframe, giving you no option?

• problem with connecting to the service of the administration of essbase

  Hi guys,.

  I have a problem with connectingto essbase administration service using the regional service console.

  There is no place of change taken on the essbase server.

  in the regional service console, clicking the server management component, I can find the essbase administration service is not running.but that will well essbase studio

  My essbase cube is used to be the source of OBIEE data. Now, I can not connect to the service of the administration of essbase, but the POET can read data in the essbase cube.

  Someone at - there experience this problem?

  any suggestion is appreciated!

  Hello

  Try restarting the Service of Directors.

  Kind regards

  Manan Shah