Problem with CPU Ussage svchost.exe

Similar Questions

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• MacBook Pro 17 "middle 2010 2, 66 GHz Core i7. Problems with CPU and memory.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-26 08:52:41

  Download EtreCheck from https://etrecheck.com

  Time 02:19

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: No problem - just check

  Hardware Information: ⓘ

  MacBook Pro (17-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 1

  1 2.66 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 167

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 512 MB

  Color LCD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  SSD of Macintosh (disk2) /: 998,97 (Go 117,08 free)

  Storage of carrots: disk0s2 999.35 GB Online

  SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: No.)

  EFI (disk1s1) < not mounted >: 210 MB

  SSD500GB (disk1s2) / Volumes/SSD500GB: 499,76 GB (260 MB free)

  USB information: ⓘ

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. AppBox.AppBox.plist

  ~/Library/application support/AppPolicy/AppBox - i-c 748931 - isn 6A4BB6B7-28E4-416D-BE5C-0AE3D10382ED

  ~/Library/Safari/extensions/SlickSavings.safariextz

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/VirtualBox

  [loading] org.virtualbox.kext.VBoxDrv (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetAdp (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetFlt (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxUSB (5.1.6 - 2016-09-19) [Support]

  / System/Library/Extensions

  com.olympus.DSSBlockCommandsDevice [no charge] (2.0.0 - 2016-09-13) [Support]

  Launch system officers: ⓘ

  [no charge] 8 tasks of Apple

  tasks of Apple 155 [loading]

  [running] Apple 76 jobs

  Launch system demons: ⓘ

  [no charge] 45 Apple jobs

  [loading] 158 jobs Apple

  Apple tasks 87 [performance]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loaded] org.virtualbox.startup.plist (2016-09-19) [Support]

  User launch officers: ⓘ

  com.appbox.AppBox.plist [running] (2016-09-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.spotify.webhelper.plist [running] (2016-09-18) [Support]

  [loaded] org.virtualbox.vboxwebsrv.plist (2016-09-19) [Support]

  Items in user login: ⓘ

  Mac Fan Control application (/ Applications/Mac Fan Control.app)

  iTunesHelper application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Plug-ins Internet: ⓘ

  Silverlight: 5.1.50709.0 - SDK 10.6 (2016-09-22) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-08-12)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-08-12)

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-22)

  QuickBrowse - Catalin Andrei Vasiliu - http://www.unionsoftwareonline.com (2016-04-06)

  Slick savings (2015-10-03)

  EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-07-23)

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh SSD: Disc size: 998,97 GB disc used: 881,89 GB

  Destinations:

  LaCie 2 TB TC [Local]

  Total size: 2.00 TB

  Total number of backups: 69

  An older backup: 02/09/16 10:58

  Last backup: 22/09/16 21:02

  Backup disk size: too small

  Backup TB 2.00 size < (disc 881,89 GB X 3)

  Top of page process CPU: ⓘ

  70% callservicesd

  57% findNames

  20% com.apple.WebKit.WebContent (26)

  accountsd 18%

  com.apple.AddressBook.ContactsAccountsService 17%

  Top of page process of memory: ⓘ

  2.41 GB com.apple.WebKit.WebContent (26)

  649 MB kernel_task

  Safari of 549 MB

  Mdworker (15) 238 MB

  Dropbox 156MO

  Virtual memory information: ⓘ

  1.62 Go free RAM

  6.37 GB used RAM (2.63 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  26 September 2016, 08:49:12 self test - passed

  September 2, 2016, 20:53:40 /Library/Logs/DiagnosticReports/Kernel_2016-09-02-205340_[redacted].panic [details]

  Files deleted by EtreCheck: ⓘ

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. LiveShoppers.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. Software - Updater.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com.unionsoftwareonline.AppMonitor.plist

  On 26 September 2016, 08:39:42 - / Library/LaunchAgents / com LiveShoppers.agent.plist

  On 26 September 2016, 08:39:42 - Library/LaunchAgents/com. Software - Updater.agent.plist

  26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Ebay Shopping Assistant.safariextz

  On 26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Searchme.safariextz

  What are the symptoms you experience that lead you to believe that there are problems with the CPU and the RAM (or is it storage?)?

  Ciao.

• Serious problem with CPU 'maximum frequency.

  Hello

  I have a problem with my W510.

  I think that this problem has been around since I bought it, or at least for a month or two after I bought it.

  When I plug the power in, or out, it almost always affects maximum frequency of the processor, as seen in the Windows 7 resource monitor, as well as a program called CPU - Z which shows in fact the current speed of the base.

  When things work correctly, the basic speed is slightly more than 3,000 Mhz.

  However, this speed changes whenever I plug the power inside or outside.

  Usually, it changes for the worse when I plug IN power!

  Often, to plug in, the speed drops to about 1 000 Mhz. Then I Plug - and the speed goes back to 3 000 Mhz. Rebranchez_ the - 2 500 Mhz. out Plug - rest on 2 500 Mhz. Plug in French - 1 500 Mhz. out Plug - 2 500 Mhz. Plug in French - 3 000 Mhz. get out - 3,000 Mhz, etc.. Every once in a while, it even drops to 300 Mhz.

  It seems to be arbitrary and random. Sometimes, it takes me 10, 15 and even 20 times connect the power out and back in to run to 3,000 Mhz.

  The machine is new, there is no fan noise, and anyway, the changes are directly correlated to plug and power in and out and that they never occur themselves - is certainly not overheating or something like that.

  Also, I don't think it's a problem with the power itself, as happens to me in different countries and different places, and in any place if I try to re - plug power enough times - it will eventually be resolved (so of course that there is enough power).

  Is there someone who knows this problem? Any suggestions?

  Thank you

  I found that Throttlestop help me with my own problem speedstep. Speed moves much to light use because of speedstep, but when I use a cpu benchmark to load four hearts they set to max speed and do not move. You can give it a try.

  Kind regards

  Fernando

• Problem with Variables shared in exe running on Windows 2000

  Anyone know if there are problems with the Variables shared on Windows 2000? I can't get the LabVIEW executables that use shared Variables to work Windows 2000 on a computer with just the runtime engine.  Everything works perfectly on XP on a machine with just the LabVIEW runtime engine installed (using LV 8.5).  Shared variables are supposed to work less than 2000.  I have attached the sample code that is based on one of the examples NOR to the Variables Shared - editor and the Subscriber - with some extra stuff for the diagnosis, I added.  On Windows 2000, you can only run one or the other exe.  It seems that as soon as the other come to the part on the diagram with the shared variable node it crashes.  Shared variables are getting written in the because if you close the editor and then run the exe subscriber it reads the latest values set properly.

  On Windows 2000 I tried with the administrator account and off the ladies of viruses, firewalls.  There may be another Windows 2000 setting that causes this problem with the two exes trying to access shared variables.  I do not have the development environment on Windows 2000 computer that the purpose of this exercise is to see if its worth using shared variables.  Windows 2000 computers remain the same in the Test and measurement world.  A research on Developer Zone does not there is no particular problem with Windows 2000.

  Any suggestion is appreciated.

  Hi André,.

  Thanks for the comments!  Your feedback will help us improve LabVIEW for our customers.  This bug has been reported to R & D (#45493), and they're currently investigating this issue.  For now, the best solution seems to be using a different operating system, as this seems to occur only in Windows 2000.  Thanks for the comments!

• I have a problem with the task host .exe.

  I have problems with slow stop caused by the task host. I downloaded the fix buy it will not be installed. I get a message that the update is not applicable to my computer. I have a Toshiba A105-S4384. Any suggestions on how to get the fix to install?

  If the hotfix is not installed, you can try compatibility mode. If you are still unable to fix, you can do a reinstall of windows and it will certainly solve the problems you are having.

• Problem with CPU P620 - one or two core Win 8.1

  I have OS 8.1 Enterprise x 86 Win. My CPUID is Intel (r) Pentium (r) CPU P6200 2.13 GHz. The Task Manager, software Specy, Everest and CPU - Z my CPU to see as a carrot. Please tell my why?
  I have HP ProBook 4520 s (XX760EA #BED)!

  Also, I can't find driver for bluetooth for this laptop!

  Can someone help me with this problem?

  Best regards!

  Hi MarioK,

  Your ProBook 4520 s is a commercial product and for your question more exposure, I would post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• problem with CPU limit [turn on/off virtual machines fails with the error: MAX VCPUs limit is reached.

  This error

  Has no power on VM
  Could not power on VM: race number VCPUs limit exceeded.
  Max VCPUs limit reached: 200 (4096 worlds)

  I searched and I found the link below [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1020121]
  But it was not for version 5
  How can I solve the problem in version 5?
  Do not restrict or limit construction to add a virtual server with the CPU is possible?

  Hi all

  I search in Google, but it is is not too useful result regarding "maxvCPUs".

  But for your reference, our machine is using "0".

  You will find my attachment for more details.

• Are there problems with both LabVIEW (built .exe) applications running at the same time?

  If I compile two different applications of LabVIEW and connect two USB DAQ devices, is possible to run applications which the same?

  Thank you

  Dave

  If each application is in talks with a separate device there should be no problem as far as I know. If two applications try to talk to the same device then you need to be aware that you can only perform one task at a time on a device.

• Problem with CPU &amp; memory tracking

  It's my first post in the VMWare community, so I hope I'm in the right place to post.

  One of our servers ESX (4.1) here at my work does not use cpu or memory of itself or any virtual computer running on it.
  I googled this as background as I could, but couldn't find advice about ESX 2 and the files that they proposed to be altered, is not even in ESX 4.1 it would seem.

  Anyone with experience of what can help?

  
  Thank you very much!

  Concerning

  Robert

  Then I would start first in restarting the server agent.  Service mgmt-vmware restart on /sbin/services.sh restart on ESXi and ESX.

  -KjB

• PowerEdge 2970 w/AMD Opteron 2212, 2nd problem with CPU install

  Hello

  We had this server gave to us and I'm trying to get it ready to use. (fairly recent with servers)

  It came with (1) CPU and 2 GB of Ram and it runs well. The BIOS reported this CPU as an AMD Opteron 2212. I wanted to add a 2nd CPU and found some refurbished. They have been described as 2nd generation of Opteron 2212 OSP2214GAA6CQ.

  When I have one installed and rebooted the system, I get the message "this system supports only the Opteron F3 or later processors. Is there a setting in BIOS that I need to change.

  Any help will be greatly appreciated

  Hello

  Processor you listed isn't an update F2 and F3, this is why it does not work. You need part number OSA2212GAA6CX or OSA2212CXWOF.

• Windows XP svchost.exe problems. Cannot find the latest updates for windows xp.

  Hello, this is my first time on the Microsoft Community page.

  I have a very strange problem with automatic updates svchost.exe and windows. I know that automatic update of windows, has been known to cause problems on XP and there is thus CPU utilization of memory leaks. Last night, I tried to install the latest windows XP updates, with automatic tool. The tool hanged during the process. Not sure why exactly. I never had a problem with it. I've been running Xp SP 3 for more than five years. In any case, I rebooted my system and checked to see if the updates actually treatment. They do not have. Then I went to the windowsupdate.microsoft site. I was trying to these updates. The scan never completed, he just constantly checked, for about 45 minutes. I decided to do some research. I found the C:\Windows\SoftwareDistribution folder "fix" online. He kicked, I renamed the file. And then disabled auto updates and restarted my computer. After windows starts, I re-activated automatic updates and waited. Nothing happened, so I did some research more. I noticed that svchost.exe uses about 25% the use of the processor. Normally my treated systemidle is 99%. I used Process explore and isolated the wuauclt.exe under the svchost.exe file. When I disable automatic updates executable, it is up to a full 99%.

  I'm not sure why it uses 25%, when I look at the actual use of the memory for the wuauclt.exe, it is only using about 17 k of memory. Which is quite low. I have not turned on microsoft update, starting in the configurations of parameters at windowsupdate. I know that in the past, that has been a problem and swallowed up system resources.

  Any advice would be helpful. Thank you in advance.

  There are a lot of threads on this forum - and many others - this problem - just try to do a Google search for UPDATES of XP SVCHOST - hits now more than 8 million.

  But to save you the trouble of tracking down the fix OK here is the short version

  1. disable automatic updates using Control Panel icon

  2. restart the computer - SVCHOST is now not going crazy

  3. check which version of Internet Explorer you have installed IE8, IE7 or IE6

  4. download and install - the links below - the good update for Internet Explorer.

  Assuming you have Windows XP 32 bits here are the direct download links:

  IE8: IE8-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41404

  IE7: IE7-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41442

  IE6: WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41458

  5. Once installed, you can reactivate the automatic updates and using Windows Update.

  Note: The bug also affects access via Windows/Microsoft Update Web site.

  KB2898785 is the "Cumulative Security Update for Internet Explorer" (December 10, 2013)

  There is a bug in the function of automatic update under XP running the SVCHOST process at full CPU load (100% or 50% or 25% depending on the number of CPU cores you have). If you have a Quad core CPU the bug works the CPU at 25% (a carrot out of four) and eventually battles through a conclusion - but if your computer is a single old Celeron or Pentium bug works the CPU chip at 100% load for many, many h/solid.

  Faster your processor and RAM than you seem to make a radical difference to the actual times are waiting for you maybe search for updates complete. Most of the old core systems were never designed to deal with this kind of situation and can easily overheat. This is especially true of laptops and desktop systems older where the radiator can be partially blocked with fluff and hairs of animals - which could cause blockages or stops!

  Microsoft said last month that the updates of Internet Explorer are treated differently from all the other updates - which is originally the XP update engine run so slowly as to appear frozen. If the update service finds that you don't have the latest version of IE that is currently available, it starts to search the entire tree of updates of IE to see what it takes - rather than offering just the cumulative current update for your system.

  But if you manually install the update yourself update Internet Explorer service is fully updated and is not search for updates of IE. But until Ms. fix it will still occur whenever a new update is published.

  MS said that intend to prune the IE updates database so that only the main cumulative updates have been offered when a search has been launched - it did not in time for the update as it should of November and obviously has not arrived or worked either in time for the December Update!

  MS say they hope to have a fix before the January updates are released (Patch Tuesday) - that the problem will be activated once the next update Cumulative of IE is released.

• Svchost.exe (LocalService) abnormally high RAM usage

  Hello, for a long time that I had a problem with the LocalService svchost.exe process where one memory use would rise dramatically, consuming gigabytes of memory after a few days of availability.

  It's a list of the services that hosts the local service svchost.exe process:

  

  I don't know any way to know which process is using so much memory. Even if I'm running Process Explorer with admin rights, I can't kill or restart one any of them except the Cache of police and WinHTTP (has not release any memory anyway). Really, I'd rather not have to restart my system to free this memory. Is there a way to fix this? Is this a common problem for a svchost.exe LocalService apparently vanilla? Fix for resettlement would it? (I plan on upgrading to 10 soon anyway, I fear that this will always be a problem on 10).

  I tried searching this question for months, and I finally gave up and just decided to ask about it. Thank you for your time.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem