Are there problems with both LabVIEW (built .exe) applications running at the same time?

Similar Questions

• It is normal to dllhost.exe 3 running at the same time?

  I found 3 clocked dllhost.exe to thhe same time in windows 7 Professional is that normal or I have a virus?

  Hello

  I wish to inform you that it is possible that the number of instances of dllhost.exe is running at the same time.

  Dllhost.exe is the Windows DCOM DLL host process. It executes the DLL COM + and control processes in Internet Information Services (IIS). As such, is used by many different applications, including Visual Basic and .NET applications.

  However, there are a lot of viruses under the same name and could easily infect a computer. Let us perform a full scan using Microsoft Safety Scanner mode without failure.

  Download Microsoft Safety Scanner, start the computer using safe mode and run a full scan.

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

  Follow the link below to learn how to do it.
  http://Windows.Microsoft.com/is-is/Windows7/start-your-computer-in-safe-mode

  Run a virus scan complete and check if the problem is resolved.

  The Microsoft Security Scanner is a security tool free to download that allows demand analyses and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please get back to us with the State of the question.

• Why are so many svchost applications running at the same time?

  

  Why are so many svchost applications running at the same time?  do all these should run?

  Original title: why so much of the same

  This might help...

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

• Are there problems with Firefox 5.0 and 1Password 3.6.1?

  I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
  Are there problems with Firefox 5.0 and 1Password 3.6.1?

  They say you need 1Password 3.6.0 or later to work with Firefox 5.0

  http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

  http://help.agilebits.com/1Password3/firefox.html
  

• Are there problems with OS 10.11.4 and opening?

  Are there problems with OS 10.11.4 and opening?

  Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• Are there problems with the copy a backup of one old drive to another?

  After buying a hard drive TB Seagate external 3 to make backups, I conclude that, because of differences in sector I can not create a backup image to the new drive.  I did an image backup on my Toshiba 1.5 TB and then copied the file to the new 3 TB drive.  While it is a pain, for the moment, I don't see anything around him.  Are there problems with it?

  Another question: If there is a question, is there a way to write the image of the file on the drive that works and then all backups incremental file at CT 3?

  Hello

  Because you can't save the picture of the system directly on your 3 TB hard drive, you can save on your 1.5 TB hard drive, and then copy it to 3 TB external hard drive.

  If you want to restore, you can restore directly from your hard drive 3 TB.

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  I don't know what you've downloaded; Try

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)
  • Flash Player for Mac OS X

• the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the computer has windows 7 64 bit.

  IPEC software crashes and the error says that it has to do with the 3.5.1

  .NET 3.5 is part of installing win7

  .NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.

  Installing .net 4 does not .net 3.5

• Is there a way to set reminders for multiple documents at the same time?

  Is there a way to set reminders for multiple documents at the same time? Now he must go through a list, manually click through a series of options, then select it. If I send more than 300 different documents to individuals at a time, it becomes tedious. Quick. A way to save me the trouble would be so so so appreciated.

  Hello Lindsayb123,

  We do have an option to set a generic reminder under choice of account in the accounts of the company and can be set by going to the tab account-> account settings-> send parameters and set reminders.

  Let me know if you need more information.

  -Usman

• Can I use both ePrint AirPrint on a HP4630 at the same time

  I have a printer HP4630 I have to use with an iPad and a laptop Mac (PowerPC with OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac laptop at the sametime.

  I understand that Mac laptop cannot connect to the printer on the network because it is not capable of running OS X 10.6 and higher.

  I appreciate your help.

  Hello Chesher5,

  Welcome to the Forums of HP Support!

  Regarding the investigation on ePrint and AirPrint for Officejet 4630, yes they can be both used at the same time. They are completely separated from the printed media. Although that require a network connection.

  If you have any problems affecting the top or help, please let me know and I will do my best to help.

  See you soon,.

• Some profiles running at the same time, others are not

  I have three 'profiles' that I use for firefox (a general, a working one and locked). I can load them with the '-p' option on the command-line very well. If no firefox runs, and then one of them works perfectly. So I think I have the basics working properly.

  However, two of the profiles (work and general) does not work at the same time. But that locked will run with either of the other two. I cannot understand why and I'm looking for some clues on the newspapers to activate or to debug levels to raise or parameters to twist inside (or outside) profiles.

  Specifically, by "does not work", I mean that if 'general' profile firefox is running, so if I start my work profile (i.e., "PEI working firefox"), he has just opened a new window on the current general profile. If I open the locked profile (i.e., "firefox Pei lockdown") which appears fine (starts a separate instance of firefox, with its own plugins and whatnot).

  I had this problem for a long time (many version of Firefox, before even the 3.0, I think). I have this problem on Windows (but WinXP and now Win7).

  I am comfortable with tweaking the settings and looking through the logs, but not sure what to activate. Google searches have not been successful (it seems to be relatively few people using Firefox profiles).

  You can get Firefox to run different profiles simultaneously by adding-no option command line remotely and more of the P-

  For more information, see opening a new instance of your application of Mozilla with a different profile - MozillaZine Knowledge Base

• Can I downgrade to version 3.6 to 4.0 Beta without losing my favorites? Are there problems with it?

  I have problems with version 4.0 beta and want to downgrade to the newer version. Can I download it and install it without loosing all bookmarks? Are there any known issues with this? What do I need to uninstall first 4.0?

  @rog.howe Yes, use Add/Remove programs. You should also see the right to earlier version next to the beta one.

• Are there problems with Windows 8?

  Windows 8 will give problems?

  The short answer is Yes, there are problems. There will be problems with comatibility hardware and the availability of drivers. Bugs in drivers that are technical support available, unresponsive, etc..

  Expect everything.