Problem with Create Table from target in CKM Oracle

Similar Questions

• Problem with create table as select (DEC)

  Hello
  
  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
  
  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
  
  Or any other solution to solve this problem?
  
  Thanks in advance

  Sweety wrote:
  Hello

  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.

  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).

  Or any other solution to solve this problem?

  Thanks in advance

  No, this is not possible. You need to get the manuscript of dependent object and create it manually.

• Problem with creating tables DB DWH

  Hello
  During the generation of tables of data warehouse (dry 4.10.1 how to create the Data Warehouse Tables), I got to the top with an error indicating that "Datawarehouse Creating tables failed '.
  But when I checked in the log "generate_ctl.log" file, it has the message below:
  
  + "Schema will be created in the following containers: +"
  Oracle 11.5.10
  Oracle R12
  Universal
  
  
  
  Conflict between containers:
  
  
  ---------------------------------------------
  Table name: W_BOM_ITEM_FS
  Column name: INTEGRATION_ID.
  + Column properties that are different: [keyTypeCode] +.
  ---------------------------------------------
  
  Success! "
  
  When I checked in the database of DWH, I find tables DWH, but do not know if all tables have been created?
  Can someone tell me if my DWH tables are all created? Tables of how much would be created for EBS containers above?
  Also, should I have to drop a container of EBS to create tables DWH successfully?
  
  The Installation guide States when creating tables DWH fails then "createtables.log" will not be created. But in my case, this log file is created.
  
  Published by: userOO7 on November 19, 2008 14:41

  Even if you do the install with DBA role, it will fail is that sse_role is not present. Please, create it and try again. You must also create a user of separate database to the data warehouse that is separate from the repository of DAC. Then you can remove and re-create the account of data warehouse without losing the DAC repository.

  4.3.4.1 create databases
  http://download.Oracle.com/docs/CD/E12127_01/doc/BIA.795/e12083/windows_ic.htm#i1081422

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Problem with a table

  Hello

  Sorry for my bad English.

  I have a problem with a table. I made a table with a script, but when I add a new line, this script will not work in the new lines. I know that I have something wrong, but I do not know the solution. Anyboy help me? You can see the file in http://www.frmgm.jazztel.es/duda.pdf. I am new in programming.

  I thank you very much.

  OK, now I understand... each row that you add to the table changes the somExpression for objects (so that they are unique). The repeating subform Gets a case number, but the rest of the phrase remains the same. If you do not include a number of occurrence, then the 1st appearance is supposed to... that is why only the 1st row is affected. You can build expressions so that you can derive the correct number of occurrence. The click event code would look like this:

  If (xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]").) Casillaverificacion1.RawValue == '0') {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = 'hidden ';
  } else {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = "visible";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion1.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "open";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  }

  You can see that the xfa.resolveNode takes a string that represents the object we want to use. The string is then built and the number of occurrence of the Fila1 subform is derived by obtaining the index number of the subform parent of the object that we clicked (this.parent.index). Occurane numbers are wrapped in [] brackets.  The rest has not changed. You will need to update your code to use this technique.

  Hope that helps

  Paul

• Problem with the Tables of the Buliding warehouse...

  Hi all
  
  I want to try to create tables DWH via Dac.but now I have error
  takes i.e) Done.some will be fail.we use Sibel 8.1.1 System.
  Once I chicked my logfile.
  
  createwtables.log
  
  Siebel Enterprise Applications ODBC import utility, Version 7.7 DDL [18030] ENU
  Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
  
  This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
  San Mateo, CA 94404.
  
  The user accepts that any use of this software is governed by: (1) the there is
  the user limits and other conditions of the license agreement which
  has been concluded with Siebel Systems or their dealers. and
  (2) the notice of rights exclusive and limited included in this software.
  
  WARNING: THIS SOFTWARE IS COPYRIGHTED BY THE AMERICAN AND INTERNATIONAL.
  ANY REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PART
  OF IT, MAY RESULT IN HEAVY CIVIL AND CRIMINAL PENALTIES, AND WILL BE
  BEING PROSECUTED TO THE EXTENT POSSIBLE UNDER THE LAW.
  
  If you received this software by mistake, please notify Siebel Systems
  immediately at (650) 295-5000.
  
  C:\orahome\10gR3_1\bifoundation\dac\UTILITIES\BIN\DDLIMP/i N/s N/u OLAPUSER/p * / OLAP_USER/g SSE_ROLE/f C:\orahome\10gR3_1\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl/b/k/x/w Y c
  
  Connecting to the database...
  Connected.
  
  Reading tables and DDL file indexes...
  Read 1110 tables and indexes the DDL file 0...
  
  Existing scheme of reading...
  Read the tablespaces 0, 0 tables and the indexes 0 a schema from existing...
  
  Running the SQL statements to the database...
  
  S1000: [DataDirect] [ODBC Oracle driver] [Oracle] ORA-01031: insufficient privileges
  
  create table M_10A_ORG_D)
  Number DATASOURCE_NUM_ID (10, 0) not null,
  Number (10, 0) ETL_PROC_WID default 0 non-zero.
  Number (10, 0) GEO_WID default 0 non-zero.
  INTEGRATION_ID varchar2 (30 char) not null,
  Number (10, 0) ROW_WID default 0 non-zero.
  Char ACCNT_FLG (1 car).
  ACCNT_REVN (22: 7), the number
  Char ACTIVE_FLG (1 car).
  Char CHANNEL_FLG (1 car).
  CHNL_ANNL_SALES (22: 7), the number
  Char COMPETITOR_FLG (1 car).
  Date of CREATED_DT,
  Char DIVN_FLG (1 car).
  EMP_COUNT (22: 7), the number
  Date of FORMED_DT,
  HIST_SLS_VOL (22: 7), the number
  Char ORG_FLG (1 car).
  Char ORG_PRTNR_FLG (1 car).
  Char PROSPECT_FLG (1 car).
  Date of PRTNRSHP_START_DT,
  Char PRTNR_FLG (1 car).
  PRTNR_SALES_RANK (22: 7), the number
  PTNTL_SLS_VOL (22: 7), the number
  Date of PTSHP_END_DT,
  Char PTSHP_FEE_PAID_FLG (1 car).
  Date of PTSHP_RENEWAL_DT,
  PTSHP_SAT_INDEX (22: 7), the number
  Char PUBLIC_LISTING_FLG (1 car).
  Number SALES_EMP_CNT (10, 0),
  Number SERVICE_EMP_CNT (10, 0),
  U_ACCNT_RVN (22: 7), the number
  Date of U_ACNTRVN_EXCH_DT,
  U_CHNL_ANNL_SLS (22: 7), the number
  Date of U_CH_ASLS_EXCH_DT,
  U_HIST_SLS_VOL (22: 7), the number
  Date of U_HST_SLS_EXCH_DT,
  Date of U_PTL_SLS_EXCH_DT,
  U_PTL_SLS_VOL (22: 7), the number
  ACCNT_LOC varchar2 (50 char),
  ACCNT_STATUS varchar2 (30 char),
  ACCNT_STATUS_I varchar2 (50 char),
  ACCNT_TYPE_CD varchar2 (30 char),
  ACCNT_TYPE_CD_I varchar2 (50 char),
  ANNUAL_REVN_CAT varchar2 (30 char),
  ANNUAL_REVN_CAT_I varchar2 (50 char),
  BASE_CURCY_CD varchar2 (20 char),
  BU_NAME varchar2 (100 char),
  CHNL_SALES_GRWTH varchar2 (30 char),
  CHNL_SALES_GRWTH_I varchar2 (50 char),
  CITY varchar2 (50 char),
  COUNTRY varchar2 (30 char),
  DIVN_TYPE_CD varchar2 (30 char),
  DIVN_TYPE_CD_I varchar2 (50 char),
  DOM_ULT_DUNS_NUM varchar2 (15 char),
  DUNS_NUM varchar2 (15 char),
  EXPERTISE varchar2 (30 char),
  EXPERTISE_I varchar2 (50 char),
  FREQUENCY_CAT varchar2 (30 char),
  FREQUENCY_CAT_I varchar2 (50 char),
  FRGHT_TERMS_CD varchar2 (30 char),
  FRGHT_TERMS_CD_I varchar2 (50 char),
  GLBLULT_DUNS_NUM varchar2 (15 char),
  KEY_COMPETITOR varchar2 (100 char),
  LINE_OF_BUSINESS varchar2 (30 char),
  MAIN_PH_NUM varchar2 (40 char),
  MGR_NAME varchar2 (160 char),
  MONETARY_CAT varchar2 (30 char),
  MONETARY_CAT_I varchar2 (50 char),
  NAME varchar2 (100 char),
  NUM_EMPLOY_CAT varchar2 (30 char),
  NUM_EMPLOY_CAT_I varchar2 (50 char),
  ORG_CITY varchar2 (50 char),
  ORG_COUNTRY varchar2 (30 char),
  ORG_MAIN_PH_NUM varchar2 (40 char),
  ORG_MGR_NAME varchar2 (160 char),
  Nom_org varchar2 (100 char),
  ORG_PRTNR_TIER varchar2 (30 char),
  ORG_PRTNR_TIER_I varchar2 (50 char),
  ORG_PRTNR_TYPE varchar2 (30 char),
  ORG_PRTNR_TYPE_I varchar2 (50 char),
  ORG_STATE varchar2 (50 char),
  ORG_ST_ADDRESS varchar2 (200 char),
  ORG_TERR_NAME varchar2 (75 char),
  ORG_ZIPCODE varchar2 (30 char),
  PAR_DUNS_NUM varchar2 (15 char),
  PAR_INTEGRATION_ID varchar2 (30 char),
  PAR_ORG_NAME varchar2 (100 char),
  PRI_LST_NAME varchar2 (50 char),
  PRTNR_NAME varchar2 (100 char),
  PR_COMPETITOR varchar2 (100 char),
  PR_INDUST_NAME varchar2 (50 char),
  PR_ORG_TRGT_MKT varchar2 (50 char),
  PR_PTSHP_MKTSEG varchar2 (50 char),
  PTSHP_PRTNR_ACCNT varchar2 (100 char),
  PTSHP_STAGE varchar2 (30 char),
  PTSHP_STAGE_I varchar2 (50 char),
  RECENCY_CAT varchar2 (30 char),
  RECENCY_CAT_I varchar2 (50 char),
  Varchar2 (30 char) REGION,
  REGION_I varchar2 (50 char),
  REVN_GROWTH_CAT varchar2 (30 char),
  REVN_GROWTH_CAT_I varchar2 (50 char),
  Varchar2 (50 char) STATE,
  ST_ADDRESS varchar2 (200 char),
  U_ACNTRVN_CURCY_CD varchar2 (20 char),
  U_CH_ASLS_CURCY_CD varchar2 (20 char),
  U_HST_SLS_CURCY_CD varchar2 (20 char),
  U_PTL_SLS_CURCY_CD varchar2 (20 char),
  VIS_PR_BU_ID varchar2 (15 char),
  VIS_PR_POS_ID varchar2 (15 char),
  CODE POSTAL varchar2 (30 char))
  ;
  error writeExecDDL (UTLOdbcExecDirectDDL pDDLSql).
  error writeExecDDL (pOperCallback UTLDbDdlOperTblCreate).
  Error in MainFunction (UTLDbDdlDbMerge).
  Error in the Main function...
  
  
  Please let me know how reslove this error...

  Use the setup.exe from Disk1\install\win32
  ex: D:\DAC_V16377-01\dac\Disk1\install\win32

  It works without any problem

  Score pls help if

• Calc problem with fact table measure used in the bridge table model

  Hi all
  
  I have problems with the calculation of a measure of table done since I used it as part of a calculation in a bridge table relation.
  
  A table of facts, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate is SUM. Whenever PROJECT_COST was used with any dimension, the appropriate aggregation was made at appropriate levels. But, no more. One of the relationships that project_fact is a dimension, called PROJECT.
  
  PROJECT_FACT contains details of employees, and every day they worked on a project. So for one day, employee, Joe, could have a PROJECT_COST $ 80 to 123 project, the next day, Joe might have $40 PROJECT_COST for the same project.
  
  Dimension table, PROJECT, contains details of the project.
  
  A new feature has been added to the software - several customers can now be charged to a PROJECT, where as before, that a single client has been charged.
  This fresh percentage collapse is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the project, CUSTOMER_ID, will BILL_PCT. BILL_PCT always add up to 1.
  
  Thus, the bridge table might look like...
  CUSTOMER_ID BILL_PCT PROJECT
  123 100.20
  123 200.30
  123 300.50
  456 400 1.00
  678 400 1.00
  
  Where to project 123, is a breakdown for multiple clients (. 20,.30.50.)
  
  Let's say in PROJECT_FACT, if you had to sum up all the PROJECT_COST for project = 123, you get $1000.
  
  
  Here are the steps I followed:
  
  -In the physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE and PROJECT_BRIDGE (a 1:M) PROJECT.
  PROJECT_FACT = > PROJECT_BRIDGE < = PROJECT
  
  -In the logical layer, PROJECT has a 1:M with PROJECT_FACT.
  PROJECT = > PROJECT_FACT
  
  -Logical fact table source is mapped to the bridge table, PROJECT_BRIDGE, so now he has several tables, it is mapped (PROJECT_FACT & PROJECT_BRIDGE). They are defined for an INTERNAL join.
  -J' created a measure of calculation, MULT_CUST_COST, using physical columns, which calculates the sum of the PROJECT_COST X the amount of the percentage in the bridge table. It looks like: $ (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT)
  -J' put MULT_CUST_COST in the presentation layer.
  
  We still want the old PROJECT_COST autour until it happened gradually, it is therefore in the presentation layer as well.
  
  
  Well, I had a request with only project, MULT_CUST_COST (the new calculation) and PROJECT_COST (the original). I expect:
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123. $1000 $1000
  
  I'm getting this for MULT_CUST_COST, however, for PROJECT_COST, it's triple the value (perhaps because there are quantities of 3 percent?)...
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123 $1000 (correct) $3000 (incorrect, it's been tripled)
  
  If I had to watch the SQL, you should:
  SELECT SUM (PROJECT_COST),
  SUM (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT),
  PROJECT
  Of...
  PROJECT GROUP
  
  
  PROJECT_COST used to work properly at a table of bridge of modeling.
  Any ideas on what I got wrong?
  
  Thank you!

  Hello

  Phew, what a long question!

  If I understand correctly, I think the problem is with your old measure of cost, or rather that combines with you a new one in the same request. If you think about it, your request as explained above will bring back 3 rows from the database, that's why your old measure of cost is multiplied. I think that if you took it out of the query, your bridge table would work properly for the only new measure?

  I would consider the migration of your historical data in the bridge table model so that you have one type of query. For historical data, each would have a single row in the bridge with a 1.0 BILL_PCT.

  Good luck

  Paul
  http://total-bi.com

• To load multiple records in multiple tables from target

  I have read several records as a set of a file flat source unique and load in the different target tables.
  I have to read 3 discs as a game and load different targets in 3 tables and read another 3 disks as a game and load in the previous tables 3 target and it will
  until all of the records from flat file are loaded.
  The structure of the file is as follows:
  Header record
  Record line
  Record distribution
  Header record
  Record line
  Record distribution
  ....
  ....
  ... ...
  
  Read the header record and load into the target table
  Record line to read and load in the target B table
  Record Distribution to read and load in the target C table
  -Repeat the same steps until all records are read and loaded into the target tables.
  
  I would be grateful if anyone can suggest the best approach to the design of interface/package and error conditions to manage?
  
  Thank you
  RAM

  Hello

  in this case you must create the data store depending on a model "Flat file".
  For example, create 3 store data with the same resource (file), but change the column definition
  Usually on the first column, set the 'model' for each specific format "variable code.

  You create 3 interfaces and load your target (for example database table)

  Concerning

  Stéphane

• Problem with creating a sequence

  Hello
  
  I'm having a problem with a sequence that I am creating. Basically, I'm trying to create a sequence with a default value based on the value in another table, i.e.

  CREATE SEQUENCE seq
  START WITH (
              min(customer_id) from customer
              )
  INCREMENT BY 1;

  Is this possible? I get errors.

  You can use dynamic sql or, if you use SQL * more take advantage of substitution variables:

  SQL> DROP SEQUENCE seq
    2  /
  DROP SEQUENCE seq
                *
  ERROR at line 1:
  ORA-02289: sequence does not exist
  
  SQL> DECLARE
    2      stmt VARCHAR2(1000);
    3  BEGIN
    4       SELECT  'CREATE SEQUENCE seq START WITH ' || min(empno)
    5         INTO  stmt
    6         FROM  emp;
    7       EXECUTE IMMEDIATE stmt;
    8  END;
    9  /
  
  PL/SQL procedure successfully completed.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> DROP SEQUENCE seq
    2  /
  
  Sequence dropped.
  
  SQL> COLUMN s NEW_VALUE s NOPRINT
  SQL> SELECT  min(empno) s
    2    FROM  emp
    3  /
  
  SQL> CREATE SEQUENCE seq START WITH &s;
  old   1: CREATE SEQUENCE seq START WITH &s
  new   1: CREATE SEQUENCE seq START WITH       7369
  
  Sequence created.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> 
  

  SY.

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• problem with creating

  Hello
  
  I created the table below.
  

  -- Create table
  create table RC_ANNEX_CODE
  (
    CODE_ID         NUMBER(8),
    ANNEX_ID        NUMBER(8) not null,
    FORM_TYPE       VARCHAR2(50),
    ANNEX_FORM_CODE VARCHAR2(50) not null,
    ANNEX_CODE_DESC VARCHAR2(200)
  )
  tablespace TS_IRS
    pctfree 10
    initrans 1
    maxtrans 255
    storage
    (
      initial 64K
      minextents 1
      maxextents unlimited
    );
  -- Create/Recreate primary, unique and foreign key constraints 
  alter table RC_ANNEX_CODE
    add constraint PK_RC_ANNEX_FORM_CODE primary key (ANNEX_FORM_CODE)
    using index 
    tablespace TS_IRS
    pctfree 10
    initrans 2
    maxtrans 255
    storage
    (
      initial 64K
      minextents 1
      maxextents unlimited
    );

  After you have created the table below
  

  create table RCI_annex_code
  (
    I_ANNEX_FORM_CODE_ID VARCHAR2(50) NOT NULL,
    I_ANNEX_FORM_CODE    VARCHAR2(50),
    ANNEX_FORM_CODE_ID   NUMBER(8)
  )
  tablespace TS_IRS
    pctfree 10
    initrans 1
    maxtrans 255
    storage
    (
      initial 64K
      minextents 1
      maxextents unlimited
    );
  -- Create/Recreate primary, unique and foreign key constraints 
  alter table RCI_annex_code
    add constraint PK_RCI_annex_code_ID primary key (I_ANNEX_FORM_CODE_ID)
    using index 
    tablespace TS_IRS
    pctfree 10
    initrans 2
    maxtrans 255
    storage
    (
      initial 64K
      minextents 1
      maxextents unlimited
    );

  When I create constraints, it gives me an error:-ORA-02270: no unique or primary key corresponding to this column list
  

  alter table RCI_annex_code
    add constraint FK_RCI_annex_code foreign key (ANNEX_FORM_CODE_ID)
    references rc_annex_code (code_ID);

  It gives an error for the altar above, kindly help

  If the parent key is really rc_annex_code.code_id, and the pharmacokinetics of the rc_annex_code is really annex_form_code, and then rc_annex_code.code_id make it unique:

  create table rc_annex_code
  ( code_id              number(8) constraint uk_rc_annex_form_code unique
  , annex_id             number(8) not null
  , form_type            varchar2(50)
  , annex_form_code      varchar2(50) not null constraint pk_rc_annex_form_code primary key
  , annex_code_desc      varchar2(200) )
  tablespace ts_irs;
  
  create table rci_annex_code
  ( i_annex_form_code_id not null
                         constraint pk_rci_annex_code_id primary key
                         constraint fk_rci_annex_code references rc_annex_code (code_id)
  , i_annex_form_code    varchar2(50)
  , annex_form_code_id   number(8) )
  tablespace ts_irs;
  

  Note that it is often a good idea NOT to specify the data type for the columns of the FK and rather define the constraint so he can inherit from the parent.

  It's also a common convention to put the PK columns first in the table definition - it is a bit confused in your example, because code_id is listed first but isn't the PK. That they mix? I noticed that you have defined rci_annex_code.i_annex_form_code_id as varchar2 (50) (as annex_form_code.annex_form_code), but then you try to reference rc_annex_code.code_id, which is number (8). I wonder if you meant rc_annex_code.code_id to be the PK in the first place, that is to say:

  create table rc_annex_code
  ( code_id              number(8) not null constraint pk_rc_annex_form_code primary key
  , annex_id             number(8) not null
  , form_type            varchar2(50)
  , annex_form_code      varchar2(50) constraint uk_rc_annex_form_code unique
  , annex_code_desc      varchar2(200) )
  tablespace ts_irs;
  
  create table rci_annex_code
  ( i_annex_form_code_id not null
                         constraint pk_rci_annex_code_id primary key
                         constraint fk_rci_annex_code references rc_annex_code (code_id)
  , i_annex_form_code    varchar2(50)
  , annex_form_code_id   number(8) )
  tablespace ts_irs;
  

  The whole ' Code ' / ' ID ' naming system is a little confusing so, normally, a code is just a kind of code. You have 'Code' and 'ID' in both table names and column names, with 'annex_form_code' in the 'annex_form_code_id' in the child and parent.

• Problem with 'show tables' syntex and dashes

  I am currently working on an application that requires me to all tables in a database of output.
  The name of the database consists of the domain name (which include a dash "-") and a name I specified when creating.
  
  So, when I use:
  < name cfquery = "qTables" > display tables < / cfquery >
  < cfdump var = "" #qTables # "/ >"
  
  I get a result with the table with the title of the column names: TABLES_IN_DOMAIN-NAME_DBNAME.
  When I try to refer to this variable, SEE process only the name before (and not including) the dashboard.
  So the error I get is: "Element TABLES_IN_DOMAIN is undefined in QTABLES.
  
  Is there a way around this problem?
  Thank you in advance.

  You can reference the query using the notation of the structure

  
  #qTables ["TABLES_IN_DOMAIN-NAME_DBNAME"] [currentRow] #.
  

• database stress test - datagenerator problem with import data from oracle

  Hi all
  
  Today, I'm doing a stress test on my new server. Someone from this forum told me that there is a nice software for it:
  
  http://www.dominicgiles.com
  
  I have a problem with Datagenerator. I can't fill my user directly in the database. DataGenerator always has an exception. What ever...
  
  I tried to generate data on hard drive. It seems to go well. In the file data, I found a large number of files:
  
  *.dat
  *. CTL
  *. SQL
  
  N, anyone know how I can import only the files of user oracle?
  
  
  see you soon
  
  Dlugasx

  I do the table drop in the first place, I think it's to be sure, there are no objects before loading.

  Nicolas.