Similar Questions

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

• Button redirect URL always redirects with the Validation Error Messages

  Hi all
  I need help/clarity on not allowing a redirect button redirect the page when there are Validation Error Messages that appear on the Page. I use a form with about 10 postings. I don't want an end user to be able to continue to use / click on the redirect if one of these Validations button occurs. My button redirect URL lance a standard call to redirect javascript to pass some values of 1 shape to another shape, button calls the function. I also have a Condition on the button which does not display this button based on some users. Any help with this is certainly appreciated.

  OK, your always using management of javascript, can you not use a branch of the page under branches? Set the target under the button - no target - and because using a branch of page, you can set the domestic fire after calculations and validations, use a branch of the page...

• Problem with Photos Soft - error message the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00

  Hello, hope someone can help with my MacBook Pro sluggish.

  I'm in OS X Yosemite 10.10.3 version and tried to upgrade to El Capitan 10.10.5 on a Macbook Pro 13inc mid-2012.  He said it has already downloaded twice, but when I open the software it is still sitting at 10.10.3 without modification, download seems to take a lot of time - been sitting for about 6 hours.

  Now I trying to open the photos app but get the following error coming - the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00.

  Any advice on what are the options for my new photos app! Have you tried different time machine backups and the computer does not like it either

  Upgrade to El Captain OS X 10.11.2 which includes Photo 1.3

  I have no idea of what you see on "El Capitan 10.10.5" as far as I know is not exiat

  LN

• Problem with netflix Silverlight Error Message ID: 1622, the Setup log file could not be written. Verify that the Temp folder exists and that you can write to it.

  Original title: Netflix 8010-but mistake the Inprivate browsing is disabled

  OK, I got some kind of virus this kind of thing where it was like a fake antivirus, fortunately I knew and got rid of him and everything seems to work fine except that whenever I try to watch something on netflix, I get this error. He said essentially that inprivate browsing is turned on and that it cannot play the video. Then I tried to disable Inprivate more through the registry. However it still gives me the error.

  After that, I found something that said it could be silver light. Now I uninstalled light silver and restarted, but it won't let me reinstall it. He tries and tells me "unable to install silverlight" if I click it takes me to http://www.microsoft.com/getsilverlight/resources/help.aspx?errorID=1622more information.

  So now I'm still pretty much where I started. IM thinking responsible Foing to BestBuy and geeksquad tell later if I can't get this figured out. Thanks in advance.

  Edit: I forgot to say that I tried to uninstall IE9, but it tells me there is an error uninstalling, so I downloaded firefox and it shows me the same error of netflix.

  Hello
  Try these two links.
  The first is a forum on the same issue. The second is the forum for silverlight:
  http://forums.Silverlight.NET/p/182263/412872.aspx

  http://forums.Silverlight.NET/13.aspx
  Eddie b.

• problem with the drive skypoker, message reads. ascipt in this movie is causing flash player 9 to run slowly, your computer can become unreponsive. all other programs are OK

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  stewartmac,
  Since this problem only occurs with the SkyPoker website I would say check with their support for all the problems they know.  Here is a link I found on their site that contains information on this subject.  http://help.Skybet.com/display/4/KB/article.aspx?aid=1227&n=1&docid=188546&tab=search

  Also, make sure you have the latest version of Flash Player.  If you are using IE8 then you can set this page Web is running in compatibility mode.  Here's an article that explains the IE8 Compatibility mode: http://support.microsoft.com/kb/956197/ Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Jdev11g; Customizing the Error Messages from the Business components

  Hi all
  
  Using Jdeveloper 11.1.1.2. I customized the BC error message using message bundle. My bundle of message class is
  
  SerializableAttribute public class MessageBundle1 extends ListResourceBundle {}
  private static final Object [] [] sMessageStrings =
  New String [] [] {}
  {"Houston-26048',"child records exist against the selected record"},
  {"EMP_JOB_FK", "there are the child records to selected record" ""},
  {"Houston-25013',"record already exists"},
  {"JOB_ID_PK", "' Job ID already exsist" "}
  };
  
  / * Return string identifiers and the corresponding Messages in a two-dimensional array.
  */
  protected Object [] [] getContents() {}
  Return sMessageStrings;
  }
  }
  
  
  Need help on two or three issues, I am confronted with this: -.
  
  (1) although I gave the error message for Houston-25013 and JOB_ID_PK, always I get after the error message on the user interface, when you save the new record
  "Too many objects correspond to the oracle.jbo.Key [AD_PRES primary key]."?
  (2) why do I get "Attribute in HrModule.JobsView1 JobId is required." with above the error message in the error popup window?
  "(3) when removing the record, even though I'm getting desired error message on UI ' oracle.jbo.DMLConstraintException: there are the child records to selected record", why the error message is prefixed by "oracle.jbo.DMLConstraintException".?
  (4) how can I locate the error messages in another language?
  
  Thank you
  Vikram
  
  Published by: Vikram K on March 22, 2010 15:23

  Hello

  Just put the number of the error, instead of Houston-25013 1), try with 25013

  For 4) you must create a second resource group with the locale in his name. ex I have a BCBundle.java for English and a BCBundle_fr.java for the French
  Check the guide FusionDev and WebDev guide for information on the locale and the beams of the resource.

  HTH

  Concerning
  Paul

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• How to catch the exact validation error message?

  Hi experts,
  
  I want to intercept the exact validation error message.
  If the validate operation fails then I get the following SOAP fault:
  
  < env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
  ns0:invalidVariables < faultcode > < / faultcode >
  faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
  < faultactor / >
  < detail >
  < exception / >
  < / details >
  < / env:Fault >
  
  However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:
  
  Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:
  
  I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.
  
  Thank you
  Viktor

  The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and

   are not populated for  element.
  This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.
  
  As per developments update in 12551111 :
  Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.
  
  This means that :
  1. {summary} , {detail} and 
  

  will be omitted for standard faults fault variables.
  2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

  There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
  Unfortunately, at the moment there is no workaround known solution for this.

  Best regards
  Oana

• Customizing validation errors

  First of all I would like to take moment to express my thanks to each and everone, who helped me on several occasions and who spend a lot of their valuable time to help other developers like me.
  
  Here's my question:
  
  When validation errors if poster in the notification, they are formatted with yellow triangles. (apex 3.2). How can I remove these yellow triangles?
  
  
  I have a page-level validation that produces several lines of error messages. I want everyone to be a bulleted list.
  
  So, basically I want all the point and level the page (which may be more than one line of error) error messages for a bulleted list.
  
  How can it be done?
  
  If a bulleted list is difficult, so I would atleast like to get rid of the yellow triangles because they don't work well for validation of the page level that up several error messages. Each own indicates an error which cannot be the case when my page-level validation fails.
  
  Thanks for looking in this thread,
  RN

  Hello

  You must look to the CSS of the theme, which is located in the folder of/i/themes/theme_12 to the HTTP Server

  Try to write as a validation error message

  Product Category should be defined.</li><li>Product needs atleast two approvals before moving it to next status.
  

  You need could show validation only in the notification, then...

  Kind regards
  Jari

• My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Set the Focus after validation error message

  I have the text element.
  It s have a validation. -> The order of the day is a valid date...
  
  In the section - Error Message:
  
  < script type = "text/javascript" >
  Alert ('Invalid Date')
  
  document.getElementById("P5000_DATA_CAD_INI").focus ();
  html_GetElement ('P5000_DATA_CAD_INI'). Focus();
  < /script >
  
  My question is how do I set the focus after the validation error message?
  
  I put document.getElementById("P5000_DATA_CAD_INI").focus ();
  html_GetElement ('P5000_DATA_CAD_INI'). Focus();
  but the two isn´t of work...
  Why?
  
  Thank you

  Hello

  You must load the jQuery library in the HTML page header.
  I gave the example of how do

  Then place my example of validation error text

  BR, Jari