Similar Questions

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

• Creative programs will install but will not open with the same error message

  Hello thank you guys for any help you can provide.

  I installed creative cloud and install a few programs. None of the programs opens and I get the same error message for each of them.

  Adobe first Pro CC 2014 cannot be opened because of a problem.

  Check with the developer to ensure that Adobe first Pro CC 2014 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X.

  Click report to display more detailed information and send a report to Apple.

  
  

  All creative programs say they are up-to-date. They have not been registered as I could not opened a still. I'm running one ate 2014 MBP with a 2.8 i7 processor, 16 GB of ram and an SSD 1 TB with 600 GB of free space.

  
  

  I uninstalled the programs and have reinstalled with the same result. I also followed solutions to other problems for programs starting or loading, without success. Any help to solve this problem or the direction of a former validated solution would be greatly appreciated.

  
  

  Thank you

  
  

  
  

  Do as he says - click on the button and provide the detailed information.

  Mylenium

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Customize the validation error message

  If the validations are missing (say point level), the error messages say something like this:
  
  2 errors
  error message to the user for the validation of the 1st
  error message to the user for the validation of the 2nd
  
  How can I remove the text "2 errors occurred"?
  
  Why I want this is because my page has 2 level point and level 1 validation validations page. Page-level validation check several business rules and raise errors for them all. so, essentially, if all validations on this page fail, I get
  
  3 errors
  
  but in fact there may be more than 3 error messages because level page validation is throwing error for multiple controls.
  
  Where can I remove "3 mistakes occurred" or customize to say "Error (s)" instead.
  
  Thank you
  RN

  Hello

  Let's see if it works for you.

  Remove the number of errors error message occurred

  Thank you
  Tauceef

• How to change the error icon in the validation error message in inputText

  Hello

  I want to change the error icon in the error message when a validation Rodez inputText.

  I know we need a new skin. Should what changes I make?

  inside in your skin such as changing file

  af|message::error-icon{ 

     content:url(/adf/images/abc.png); 

  }

• Error while unpacking program, Code2, please communicate with the author - error message occurs whenever I open my computer

  Whenever I open my computer, I received a message that says 'Error when unpacking program, Code 2, please contact the author'.  It slows me down using my computer and I really have no idea what it is.  I did research in the internet which causes some possible for this error message and I think it's regarding my Windows Update I must have clicked on last week.  Help, please! I really want this message to go.

  Thank you.

  Hi KrystleRivera,

  ·         Did you the latest changes on the computer before this problem?

  ·         When the question began?

  ·         What version of the operating system is installed on the computer?

  I suggest you follow these methods.

  Method 1:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference: http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance

• Explorer.exe & Dr. Watson continually crashes when executing the Dragon Naturally Speaking program... with the following error messages _

  Win XP Prof SP3 using: X 2 AMD Athlon 64 Dual Core processor 5200 + w / 4 Gig of Ram

  Info from the application event viewer;

  Failing application explorer.exe, version 6.0.2900.5512, failed module comctl32.dll, version 6.0.2900.5512, address failure 0 x 00076215.

  Failing application drwtsn32.exe, version 5.1.2600.0, failed module dbghelp.dll, version 5.1.2600.5512, address 0x0001295d failure.

  The details are as follows,

  Product used is Dragon Naturally Speaking (DNS) version 10.1 and according to the seller the problem isn't a problem caused DNS by their Tech Support who I worked with for more than a week...  However the problem only occurs when this program is running.  The only way that I was able to temporarily fix the problem is to stop the DNS program in the Task Manager process section and restart explorer.exe

  Given that the supplier says it's a matter of Windows and with the info I provided please help.

  Thank you.

  Try saving the DLL for applications that crashes.

  http://nuance.custhelp.com/app/answers/detail/A_ID/6204/kW/web_ie.dll/r_id/100023

  It worked for me with IE crashing.

• brief popup BACK on the desktop with the apparent error message

  This morning I started getting very brief DOS window popups that appear to contain an error message in the sense of "system error - cannot find the file name."  I can't really say because the popup flashes on the screen too fast.  The problem started shortly after my wife connected and immediately after it IE8, then continued for a few minutes before stopping.  After awhile, he reappeared and now appears irregularly intermittent.

  I checked my anti-virus (Norton corporate) because I thought it could have been a problem with the boot scan, then ran Malwarebytes' anti-malware and Registry Booster from UniBlue.  Nothing.  I tried to start Windows diagnostics.  Nothing.

  The PC seems to work normally otherwise.  The addition of the only software was a week ago (TurboTax).  Any ideas or suggestions?

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you to check in the clean boot state, if the problem persists. Follow the steps mentioned in the article below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/

  Method 2:

  Since the problem started recently, I suggest you do a system restore to an earlier point when the system worked very well and see if the problem is resolved. See the article mentioned below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• CP1525nw: new router: cp1525nw wifi install fails with the vague error message

  Product: HP Laserjet Pro cp1525nw

  OS: WIndows 8.1

  Hardware: Computer Asus laptop

  Recently received new router from Verizon (FIOS), model FQG1100 BHR4 router

  Purchase printer in 2012.

  Printer has worked with the old router; It will not communicate with the new router.

  For four days I deleted the printer from the laptop several times and tried to reinstall using the wifi. Installation instructions say to run the CD, select wifi, connect the USB cable when prompted, configure, remove the cable when prompted.

  When I attach the USB cable, Setup starts, but it expires ("taking too long") or fails with the vague message about not finding the product. I'm never invited to an SSID.

  I tried a USB installation and it worked; If the USB cable is good.

  Share print files & Windows is activated.

  I tried to re - adjust the printer by default and insured menu wifi said 'ON' for the wifi.

  I run a wireless network test report:

  SWITCH for wireless, wireless and security.

  Failure of network name (SSID found).

  DO NOT RUN for: printer settings consistent with the settings of the wireless router, no filtering, connected, the signal strength, other networks detected.

  Wireless netwrorks detected: 9

  I note the router label does not say "SSID", but said "ESSID".

  I have ideas for what to try.

  Please post here or send message to [personal information deleted]

  Last night I finally got to work.  I removed the printer entirely from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I have reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer, Setup - and he finally presented me with the screen to "provide the SSID.  The program is run properly. I printed a test page. I changed the router security to WPA2. I printed a test page.     I tried to restart it and reprinted.  I also tried to remove the cable and then print again - printing failed.

  In short, I needed to do two things: connect a cable and change the router temporarily WEP for installation.

  In my case, my printer is close enough to the router with the cable.  A bit disappointing that the true wireless will not work, but I can print wireless from my laptop.

  I saw how many people have had the same problem, I had, and how much of HP is of any help to solve this problem.  I am convinced that the printer has a defect.  I hope that my posts will be useful to a few people having the same problem.

• Windows 8 upgrade clone running with the unspecified error message

  Windows8 key upgrade to purchase online and download and run the upgrade of windows, do not progress after estimating the time and display message unspecified error. A contacted the HP Support and support of Microsoft, but both, explained the problem with the safety of home network and the bulkhead firewall norton. But no not resolved after you turn off the fire wall. Using windows 7 64bies

  Norton is a small program, an inconvenience that will not go away and likes to pretend he is disabled or uninstalled when it really isn't.

  If Norton is at fault, then it should be removed using Norton Removal Tool to make sure that it is not really there and conflicting. Disabling/uninstalling standard medium is not enough.

  Download the appropriate software suite tool and run it to completely remove the offending software. Once that is done, try to run the update.

• Windows 7 with the same error message of "Notfication dll has not been registered, program will not work correctly."

  This error message has started to come after have been a Setup screen saver display in Control Panel. It doesn't seem to do anything "not work properly", but it's pretty disgusting to see this error message every time. May is going to help me?

  Ann Snyder

  Coldwater, KS

  Hello

  If you know the name of the dll file, you can register it manually of elevated command prompt:

  Regsvr32 fullpath\yourfilename.dll

  How to run as administrator command prompt (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Problem with custom validation error message record

  Hi, so I'm having a problem of application an error message customized a validator backup.   I ran the following SQL scripts and updated the XML file as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")
  "ClassificationRequired", "ReflectiveRequiredValidator", "Validation rules")

  
  INSERT INTO commonXLAExtensionCacheItem VALUES ('1059666651E8-A7F7-447-8CF5-8EE1F467C20Q',
  "1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ', 0, 'RequiredPropertyMessage ',.
  ' Specification must have a ranking

  < rule type '6501' = >

  < event condition 'save' = >

  < if type = "ReflectiveRequiredValidator" report = "true" required = "true" property = "ProductAttributes.Classifications" msgcache = "ClassificationRequired" / > "

  < / condition >

  < / rule >

  I get an error message:

  Server error in ' / gsm' Application.

  ---

  Object reference not set to an instance of an object.

  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.
  
  Exception details: System.NullReferenceException: Object Reference not set to an instance of an object.
  
  Source of error:
  

  You have the stack trace in the error message? Assuming it's the cache:

  Give a try instead and see if that solves it.

  Delete the original entry and change the name and the inheritfrom of the ValidationMessages/ReflectiveRequiredValidator message cache, as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")

  "ValidationMessages/ReflectiveRequiredValidator", "ValidationMessages/ReflectiveRequiredValidator", "Validation rules")

• ScanJet G3110 - 'unable to communicate with the scanner' error message

  This Scanjet has worked well over the years.

  I don't remember making any changes, but now when I click on any option (for example copy or scan to email... all options) I get the error «unable to communicate with scanner» HP

  When I click on "Preferences of the Scanner", the Apple preferences page with a popup that reads:

  To use the "HP Scanjet", preferences preferences pane system must leave and reopen it.

  I click OK and system preferences change to 'Preferences system (32-bit)'

  I click on the HP icon and it opens to "no value / not connected".

  I have reset the scanner; have you checked all connections... no change.

  I put on computer.

  The scanner scans noise when it starts up.

  But when I press the "scan" button (or any button) on the scanner itself, nothing happens.

  Using OS X 10.6.7

  Any ideas?

  Hello nikhil_gupta

  The Scanjet series of scanners is of commercial products. I suggest you post in the HP Business Support forum for a better chance to find a solution, because it's the boards of HP for the consumer and there are people less familiar with this product range.

  You will find the Board Commercial Scanjet here.
  HP Business Support Forum: Scanners

• After spending the last months to build my site I opened Muse today and it comes back with the following error message:

  XML corrupted database U190 TextFrameBoxPageItem of the class record and says contact Adobe Muse CC.

  Obviously, being Sunday, nobody is there. If anyone has had this problem and that you had to do what I have built a full site of desktop/tablet/phone and really don't want to do it again!

  Thank you

  Simon

  Damage was isolated, repaired and the record returned.