Problem with deleting of correctness of the instance

Similar Questions

• Problem with deleting 2nd location of the Archivelogs

  Hello good people,
  
  
  Platform: Oracle10g R2, Win 2003 Server
  
  I have a (PROD) database configured to archive in these two places
  
  1st place: C:\Backups\PROD\ARCHIVELOGS
  location 2: D:\oracle\product\10.2.0\flash_recovery_area\PROD\ARCHIVELOGS--DB_RECOVERY_FILE_DEST
  
  When I run a guest of RMAN backup command:
  
  RMAN > backup database more entered archivelog delete;
  
  It suppresses the archivelogs in flash_recovery_area but does not remove the archivelogs in the other location (C:\Backups\PROD\ARCHIVELOGS).
  
  
  Any help please?
  
  
  Thank you and best regards.

  Try

  RMAN> backup database plus archivelog delete all input;
  

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• Problem with deleted game

  Hello

  I have recently uninstalled a game from my PC through Control Panel control/uninstall. But my problem starts when I finished tne uninstall. In folder where was a game that I uninstalled another game that has been deleted with the uninstallation of the first game, because the system has deleted all the folders and subfolders. Now, when I run the instalation of a game I acidentally removed with the uninstalaltion of the first part it is said: the game is already instaled. You want to start the uninstall? When I click Yes, nothing happens... A system can not install a game because it was not properly uninstalled and it "thinks" it is installed on my machine and cannot uninstall because the game egsists not really starts. I run Windows 7.

  Help, please. Thank you.

  Hello docleen,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have difficulties to install a game that you deleted accidentally. I would certainly help you to fix this problem.

  To better understand the issue and provides that you open troubleshooting steps, we start with two questions:

  1. what game are you talking about?

  2. who was the game that you actually deleted from your computer?

  Please do not respond with more information on the topic to provide you with the best solution.

  If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• Problem with "Filling space" described in the Blog of Tim

  Dear Experts,
  I use the invoice template described in the excellent Blog of Tim Dexter (Anatomy of a model) to produce my own version. However, I have problems with the 'fill' space as described here: http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
  
  My model is almost identical to the example, when I import XML data when there is only a single folder, fill space have not not cushion with enough blank lines so that the Total of the table at the bottom of the page, does not correspond with the watermark that I. The code in the field "Fill the space" is as in the Blog:
  
  <? If: not (count ($invLines) mod $lpp = 0) and ($start + $lpp > count ($invLines))? > <? for each: $invLines? > <? If: position() < $lpp - (count ($invLines) mod $lpp)? >
  
  
  If the number of records is greater than half a page or more, then the padding is correct. This is even if the word to say on the third page, it is a single record. Therefore, it seems that the padding does not work if the number of records is less than half a page total.
  
  Is this correct and what someone have a solution - would be greatly appreciated.
  
  Thank you very much
  Mark

  Hi Mark,

  I had problems with this earlier. See the comments on the bottom of the blog post you linked to above. The problem is down to the filling loop is a variable containing the invoice-based. If the number of invoices in this recordset is not sufficient to provide all the required filling lines, the formatting goes belly up.

  For loop in the XSLT file, you must use models of void. I got it going with my report using the code here:

  http://www.IBM.com/developerWorks/library/x-tiploop.html

  Basically you call recursively model for the number of required fill lines. A lot of effort but far as I could tell, the only solution given the available technology.

  I hope this helps.

  Jon.

• Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Hello

  If you have not already done so, it can also help update your Apple Watch to the latest version of the software:

  Update the software on your Apple Watch - Apple Support

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.

• I have the problem with my language of keyboard, the fact is I can't add or remove languages from keyboard

  Hi all
  I have the problem with my language of keyboard, the fact is I can't add or remove languages from keyboard
  When I press the keyboard button change that nothing happens, but in the event viewer I get the following message
  The failing application name: Rundll32.exe_shell32.dll, version: 6.1.7600.16385, time stamp: 0x4a5bc9e0
  Name of the failed module: input.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdf4f
  Exception code: 0xc0000005
  Offset: 0 x 0000000000003756
  ID of the process failed: 0xf5c
  Start time of application vulnerabilities: 0x01cd697d57b60837
  The failing application path: C:\Windows\system32\Rundll32.exe
  Path of the failing module: C:\Windows\system32\input.dll
  Report ID: 95fbd586-d570-11e1-8bfb-c860006d193a
  Can someone help me with this? or maybe there's another way to change the keyboard languages? for example through registry?
  Thanks in advance
  I HAVE Windows 7 x 64

  Hello

  I suggest to create a new user account and check.

  Create a user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem does not occur in the new user account, I suggest you to fix a corrupted user profile.

  Fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

  Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

  In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.