problem with deleting safely removable media

Similar Questions

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problem with the cmdlet Remove-Snapshot

  Hello everyone,

  I have a problem with the cmdlet Remove-Snapshot: it fails to remove the snapshot when I made a copy of file (Copy-Item) between calls to New-Snapshot and Remove-Snapshot if (and only if) I put - confirm option to $false. If - confirm is $true everything works, but it does not allow me to run the non-interactive script. The error that is returned is "vim.fault.InvalidVmConfig".

  Anyone know if there is a problem on my side, on the side of ESX Server or a bug in the VI Toolkit? Any possible workaround?

  I have attached the PowerShell script, I used to reproduce the error and the script log file that contains the error message.

  The versions I used are:

  VMware.Vim.dll (1.5.0.1299, "VI API 1.5.0 build.Net 142961")

  VMware ESX Server 3i, 3.5.0 110271

  I'm not able to reproduce this on my environment but I am sure that the issue is not with the - confirm: $false parameter. After you copy the file there is a timeout that is set to 10 seconds. Can you increase it (even if I do not at all see a reason of this time-out) and see what happens?

  \Yavor

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with deleted game

  Hello

  I have recently uninstalled a game from my PC through Control Panel control/uninstall. But my problem starts when I finished tne uninstall. In folder where was a game that I uninstalled another game that has been deleted with the uninstallation of the first game, because the system has deleted all the folders and subfolders. Now, when I run the instalation of a game I acidentally removed with the uninstalaltion of the first part it is said: the game is already instaled. You want to start the uninstall? When I click Yes, nothing happens... A system can not install a game because it was not properly uninstalled and it "thinks" it is installed on my machine and cannot uninstall because the game egsists not really starts. I run Windows 7.

  Help, please. Thank you.

  Hello docleen,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have difficulties to install a game that you deleted accidentally. I would certainly help you to fix this problem.

  To better understand the issue and provides that you open troubleshooting steps, we start with two questions:

  1. what game are you talking about?

  2. who was the game that you actually deleted from your computer?

  Please do not respond with more information on the topic to provide you with the best solution.

  If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• problem with resizing and remove

  I have a problem with resizing images after loading, not all of the images has the scale ratio 0.75... so for the most part, I just stretch the images having the ratio...

  is there a good method of resizing/scalling? for example enjoyed.

  and once I've loaded images, I add in the imageContainer.

  I couldn't find a way, if I click on the next thumbnail, she remove the last child (image) of the imageContainer...

  I'm confuse ATM please point me in the right direction...

  Thank you

  Load the image clicked

  function mouseClickThumb (e: Event): void {}

  var thumb: thumbnail2 = e.target as thumbnail2;

  var linkName:String = e.currentTarget.name.toString (); get the name of the link

  var imageLoader:Loader = new Loader();

  var urlRequest:URLRequest = new URLRequest (linkName);

  imageLoader.load (urlRequest);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  function imageLoaded(e:Event):void {}

  var image: Bitmap = (e.target.content) Bitmap image;

  image.x = 0;

  image.y = 0;

  somehow if I resized the images here, it didn't turn right for all...

       }

  imageContainer.addChild (imageLoader);  / / How can I delete the last image? if click on the following icon?

  }

  If you want to remove the last (highest in the display list) child of a container, you can do this way:

  var numChild = imageContainer.numChildren ();

  imageContainer.removeChildAt (numChild - 1);

  don't forget display lists starts with 0, not 1, so you must always subtract 1 to get the level number of the child in the foreground

• Problem with deletion and Redownloading iTunes and Quicktime. Error: unavailable network resources

  Original title: trouble with deletion and Redownloading iTunes and Quicktime

  I am trying to remove iTunes in my computer through my control panel, but its telling me that it cannot remove, because of unavailable network resources.  I accidentally deleted quicktime then this all started.  Before iTunes was working.  When I try to re-download the ITunes it says that you must delete old version first.  Please help me someone with a great idea?

  Hello

  Step 1: Check if you are able to uninstall iTunes in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Pass through 'Verify iTunes and related components are completely uninstalled' in the article below: http://support.apple.com/kb/HT1923

  Then try to reinstall iTunes .

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• Problem with the Spot Removal Tool

  The last several times I tried to use the removal tool the place, he did not "heal" the area that I asked for it to heal.  He heals an area adjacent to the area I want to heal.

  Any thoughts on the opportunity, it's a LR bug or something is happening with my Macbook?  I would like to address...

  Note that I ALSO encounter this problem with the adjustment Brush tool.

  (I know I can do this sort of editing in PSCC but for simple stuff like this, I usually use LRCC)

  Thanks for your help! LJB.

  IMAGE: miniature horse headshot for a friend

  screenshot 1: weird grass, I would like to change.

  

  screenshot 2: the area I have hi-limited with spot Healing Brush (it's messy but the best I could do while also doing a screen shot and not to release the spot removal tool)

  

  Screenshot 3: the pin code of the area of selection is completely in the wrong place and my strange blade of grass is still there.

  

  Change the Clone in the Heal and vice versa does not move existing pine. You will have to redo the brush stroke after changing between Clone and Heal.

• Oracle 10g - problem with "DELETE from TABLE WHERE ID in (1,2,3)" (use cfqueryparam)

  Hello, everyone.

  I have problems with executing a DELETE statement on an Oracle 10 g server.

  DELETE 
  FROM tableA
  WHERE ID in (1,2,3)
  

  If there is only a single ID for the IN clause, it works.  But if more than one ID is provided, I get an error message "SQL command" not correctly completed.  Here's the query as CF:

  DELETE 
  FROM TRAINING
  WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
       AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
  

  Someone at - it works with Oracle that can help me with this?  I'm a developer experienced in MS - SQL; Oracle is new to me.

  Thank you

  ^_^

  So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.

• Problem with @LIST and @REMOVE: not a Calc command

  Hello everyone:
  
  I wish to make this calc:
  
  Fix(Jan,FY10,...)
  + @REMOVE (@DESCENDANTS ("Accounts"), @LIST("Account1","Account2",...)); +
  ENDFIX
  
  But Essbase said that @REMOVE is not a calc command. I tried with this:
  
  + @LIST (@REMOVE (@DESCENDANTS ("Accounts"), @LIST("Account1","Account2",...))); +
  
  But does not work. I couldn't move dimension 'Accounts' for the PATCH because I would like for calc formulas associated members accounts.
  
  Could someone tell me why this approach cannot be used? Alternatives?
  
  Thank you
  
  Concerning
  
  Javier
  
  Published by: Javi M on July 21, 2010 02:07

  Rahul,

  I think you are missing the point. The OP doesn't want to caluclate another dimension for some other accounts - he wants to calculate a subset of accounts without all listing them explicitly.

  That's the whole point behind the @REMOVE being a defined member function - they work very well in TROUBLE or in a formula but not as a way to make a calculation of Member stored.

  Of course, if the OP can support the calcuation on his head then anything is possible, but he has already declared that it was a complex logic that he wouldn't come back. I guess this could change depending on his level of pain tolerance.

  Sometimes, it really stinks to write something, think it works and then realize it's completely unmanageable. I can do once or twice. :) As my first boss, has said "it takes only 2/3 as long the second time around." Words that I lived my career of.

  Kind regards

  Cameron Lackpour

• Problems with led variable removed from the database

  Hello
  
  I have problems with the following code, it draws on a database to add to a list later, player names, however outside of the statement where the name of the player are assigned they are not recognized i.e. the bits where I wrote [CODE] trace ("1these is the name of the player 1 is + player1Name"); [/ Code] etc. There are also 4 variables to do with a number of keys and as far as I can see that I am dealing with the same, declaring them upstairs, assigning them values and when I print them out later that they are beautiful, the only difference I see is the type of variable are about these things.
  
  I initialized the variables at the top, I tried to make it global, making [CODE] var player1Name: String; [/ Code], it seems a simple problem, but I can't understand it...
  
  Here's the relevant part of the code:
  
  [CODE]
  var stage3player1keyCount = 0;
  var stage3player2keyCount = 0;
  var stage3player3keyCount = 0;
  var stage3player4keyCount = 0;
  
  var player1Name ="";
  var player2Name ="";
  var player3Name ="";
  var player4Name ="";
  
  It reads in the current state keys players
  myDataP = new LoadVars();
  myDataP.load (" http://www.elementalive.net/keyDown.php");
  myDataP.onLoad = function() {}
  stage3player1keyCount = myDataP.info;
  trace (stage3player1keyCount + "is the number of player one keys");
  }
  
  myDataQ = new LoadVars();
  myDataQ.load (" http://www.elementalive.net/keyDown1.php");
  myDataQ.onLoad = function() {}
  stage3player2keyCount = myDataQ.info;
  
  trace (stage3player2keyCount + 'is the number of keys of Player 2');
  }
  myDataR = new LoadVars();
  myDataR.load (" http://www.elementalive.net/keyDown2.php");
  myDataR.onLoad = function() {}
  stage3player3keyCount = myDataR.info;
  trace (stage3player3keyCount + 'is the number of keys of player 3');
  }
  myDataS = new LoadVars();
  myDataS.load (" http://www.elementalive.net/keyDown3.php");
  myDataS.onLoad = function() {}
  stage3player4keyCount = myDataS.info;
  trace (stage3player4keyCount + 'is the number of keys of player 4');
  }
  This.stage3transferKeyList.SetStyle ("fontSize", "20");
  
  myDataT = new LoadVars();
  myDataT.load (" http://www.elementalive.net/wait1a.php");
  myDataT.onLoad = function() {}
  player1Name = myDataT.info;
  trace ("is the name of the player 1 s" + player1Name);
  printName (player1Name1, 1);
  }
  myDataU = new LoadVars();
  myDataU.load (" http://www.elementalive.net/wait1b.php");
  myDataU.onLoad = function() {}
  player2Name = myDataU.info;
  trace ("is the name of the Player 2 s" + player2Name);
  printName (player2Name, 2);
  }
  myDataV = new LoadVars();
  myDataV.load (" http://www.elementalive.net/wait1c.php");
  myDataV.onLoad = function() {}
  player3Name = myDataV.info;
  trace ("this is the name of the player 3 s" + player3Name);
  printName (player3Name, 3);
  }
  myDataW = new LoadVars();
  myDataW.load (" http://www.elementalive.net/wait1d.php");
  myDataW.onLoad = function() {}
  player4Name = myDataW.info;
  printName (player4Name, 4);
  trace ("is the name of the player 4 s" + player4Name);
  }
  
  trace ("1these is the name of the player 1 is + player1Name");
  trace ("1these is the name of Player 2's + player2Name");
  trace ("1these is the name of the player 3 is + player3Name");
  trace ("1these is the name of the player 4 is + player4Name");
  [/ CODE]
  
  Thanks for any help in advance, it is much needed and appreciated.
  
  Louise.

  I got it working! Thank you very much! You saved his life. It will take that I remember this problem... because I think he could source a few other hiccups throughout our game. You made my day!

  Thank you
  Louise

• Problem with the icon 'Remove hardware safely' on the bottom of the screen

  How can I get the icon 'Remove hardware safely' to stop making its sound? It makes the bonk sound which indicates that you can remove your device. It slows down the PC games and is just annoying. I used the troubleshooter and checked all USB options that have been listed under my 'pilot' and the message I get says that they are enabled and work correctly. When he makes his tone, the icon in the taskbar disappears and reappears then. It does not seem to be no harm in or affecting any other thing except the PC games we play on our computer. Any help is greatly appreciated.

  Hi Chrisjurrians,

  To turn off the sound for the connection / disconnection of devices, follow these steps:

  a. click Start and select Control Panel

  b. click on device sound and Audio

  c. under device sound and Audio, click its tab

  d. under program events, select the device connection and in the Strait, make scrolling the drop down for None.

  e. also repeat the same for disconnection device

  This should do the trick.

  Let us know if that helps.

• Problem with images of removal even if you just want to delete a?

  Someone had a problem when you go to custom, filters marked success, click on the flag in the Middle, and then select several images and then highlight a shot x and all of them disappear not only your highlight?

  Disable automatic synchronization.

• Problems with deleted emails do not delete

  I have an iPhone 6, when I delete the mails from gmail and/or icloud times, the emails appear back in my Inbox. I sometimes have to remove emails for 2-3 times to finally remove. This started happening after the download of the update IOS 9... I had and iPhone 6 more and it would go with the upgrade of the thought. Then I thought it might be something with my carrier, Verizon, but a co-worker has ATT and is seen the same problem. I took it to the apple store with no solutions... Please see this on the next update...

  Try resetting your e-mail account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.