Problem with function "BD" in TestStand/LabWindows

Similar Questions

• Problem with function "BD" in LabWindows/TestStand

  Hello, good day.

  I am having some problems with the connection BDfunction.

  I had a function called GetSensor , which I know it works because I have used and tested in the LabWindows environment.

  Its function is to return the value of an element in my database to give its input parameter, just that.

  

  My problem is that when I tried to use this same feature in TestStand, it seems that the BD can only function in the same way of when used of LabWindows because always display a warning message, which is display only when the values of iHdbc are iHdbc is 11 or iHdbc is 10.

  

  

  The software that I use are:

  

  Thanks in advance. Any help you could give is welcome.

  The solution to my problem with the BD connection function should use NI TestStand 2014 (32-bit) instead of the version of NI TestStand 2014 (64-bit) that I used. Just that.

• Problem with function Set Destination

  I am adding bookmarks to subheadings in a pdf document in Adobe Pro XI and am having a problem with the function of the Destination defined in a specific case. I am attaching a video that shows the issue clearly, but I'll explain below as well in case some people have difficulties to display the video.

  I understand how to create a bookmark for a subtitle, and I understand how to use Set Destination to ensure that, when the user clicks on the bookmark in the Panel, the subtitle is displayed at the top of the screen.

  However, I ran into a problem. Some of my subtitles are run subtitles, which means that subtitles are part of the first line of the paragraph (this is common in the APA and some other editorial styles). When the running subtitle begins the last paragraph of a page and is towards the bottom of the page, the function of the Destination value does not work. Specifically, when I set the destination of such a chapter, when the user clicks on the bookmark in the Panel, it sends the user to the page after the bookmark. Is the closest I can come to get the subtitles to appear at the top of the page to set the location to the previous sentence, but this is obviously inaccurate. I work in professional contexts in which the bookmark should appear at the top or the documents of my clients will sometimes not be accepted for publication.

  Does anyone have an idea how to get these subtitles appear on the first line at the top of the page?

  Don't forget to turn off the continuous vision before you set bookmarks. Acrobat makes no sense "line active" for a link and links to the number of current page shown in the toolbar.

• Satellite C850 - 1-5 - problem with function keys

  Good evening

  Since a few days, I noticed on my laptop that I could not do more as before, which is the volume with the button located at the top of the keyboard (F9 - F10) or the brightness. On the square, it's functions F1, F2, F3 etc. who went. I have already tried using parameters and setting key 'special functions' systems, but that worked again, then in "mode F1 - F12", still nothing and I challenged 'special functions', but again without success.

  How to solve this problem, please?

  Can you please tell us what model of laptop do you have?

• Windows 8 problem with functionality of keyboard backlight radiance on HP envy 17

  Hello

  I upgraded my laptop HP Envy 17 to Windows 8.

  I went and applied all the updates driver provided here for use with Win8.

  The question (more than one gene) implies the radiance keyboard.

  Start-up lighting of the keypad is disabled. When I press the F5 key, the lighting of the keypad is disabled.

  When I press the button once again, lighting is turned on.

  Is there a setting (Panel or registry) I can modify to prevent that from happening.

  Thank you.

  EWO

  Hello Eyes - Wide - Open and jdubs. I understand that after your update of Windows 8 by pressing f (x) keys activate their functions Fn + F (X) instead of their main functions in f (x). Is this correct?
  
  Restart your laptop and enter the BIOS. Go to the section 'System Configuration '. You have enabled or disabled 'key Support Action '?
  
  When this option is simply to press the F key to activate action Fn + F (X). When it is disabled, you need to press Fn + F (X) for it to work. You want to disable it.
  
  After disabling and save your changes, restart the computer once more and then check if the problem has been resolved.
  
  Could Mslopar, you post your complete product for me number? Use this document to locate it.
  
  I hope everyone has a great day.

• Problem with function bundle on a cluster of cursor

  Hi all

  I have some difficulties to change cursor properties using cluster bundle. I want to control whether cursors are placed and what they look like.

  As far as I understand reading the help file, it should be possible just change one or more of the elements in the cluster with the function of beam, or

  am I missing something?

  I have attached a VI that show my problem.

  I use Win 7 64 bit, with LabVIEW 2009 SP1 64 bit.

  Thank you

  -Tommy

  Hello again...

  Allright, I just added a table build and corrected a minor error in the property list, and now it works!

  Thanks a lot for the support guys!

  Good day!

  I have attached the final programme of work if anyone has the same problem as me.

  Concerning

  Tommy

• Major problem with functions on the color Lumetri color tab

  For some reason that I can't access the color Lumetri functions under the label of color in the new Premier Pro update 2015. I can see fixed base, Creative... ect... ect and click on the link next to each, but when I try to expand an it shows me the section for a split second then closes to the top!  Sometimes when I restart the program I can expand these sections and play with them until they start to get blocked again. Can someone help me with this please? now something, I might be able to link to the situation (or maybe not) but when I go in the activity monitor and close the QT server) and then reopen first I am able to play with the color again for about 2 minutes before it all locks in place. I tried to do an uninstall and reinstall.

  

  I have a touchpad and it was a problem of mouse for some reason any when I tap it would be double tap...  When I tried a new mouse, it works beautifully. For a reason, it's the only part of the application it operated.

• Problem with function. error() jQuery in 3.0

  As the title suggests, since the 3.0 update I had a problem using .error jQuery function. What I'm trying to do is to hide an image whenever the link is broken. My code that worked in previous versions no longer works and I even created a test with a simple structure file to test the code, and it doesn't seem to work. For the test, I copied the code directly from API jQuery and added a simple hide function, all the elements sit on the stage:

  $("slide1").error (function () {}

  $("slide1").hide ();

  });

  This does not work, and I can't understand why. Any suggestion would be appreciated! Thank you.

  Hi, TAEgner-

  Error() does not work in the latest version of edge animate because it has been deprecated in jQuery 1.8.  Animate it 3, we have improved our version of jQuery to 2.0.3.

  Instead, try this:

  SYM. $('diapo1') .one ('error', function() {}

  SYM.$('slide1'). Hide();

  });

  I hope this helps!

  -Elaine

• Problem with functions on a Movie Clip

  Hi, I hope someone can help me with this problem!
  
  
  I have the clips
  
  _root. Inhalt.motivcontainer and another one is attached to this
  _root. Inhalt.motivcontainer.buttonLinksUnten
  
  now, I spend two video clips with:
  
  _root. Inhalt.motivcontainer.onPress = function() {}
  startDrag (_root.inhalt.motivcontainer, false, 230, 198, 75, 135);
  };
  _root. Inhalt.motivcontainer.onRelease = _root.inhalt.motivcontainer.onReleaseOutside = function () {}
  this.stopDrag ();
  };
  _root. Inhalt.motivcontainer.OnMouseMove = function() {}
  updateAfterEvent();
  };
  
  My problem is to get another function on the second clip?
  
  Perhaps one of you have a different solution to drag and too a video clip and have the opportunity to touch the clip on the corner on the scale.
  
  Sorry for my English.
  
  Thanks for your help René

  your movieclip parent (_root.inhalt.motivcontainer) intercepts all mouse events assigned to the child movieclip (_root.inhalt.motivcontainer.buttonLinksUnten).

  to solve or create an another movieclip on the timeline of parents who lies on a layer below any visible content buttonLinksUnten and assign managers above this 'new' child or use a hitTest for the parent or the child instead of two sets of managers of the mouse.

• AR invoice print report is complemented by error - problem with function MLS

  Hi all
  
  When we submit AR invoice print program he finished in error with the following message
  for some Bill to the country.
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  ARP_RAXINV_MLS_PACKAGE of the language function call. ARP_RAXINV_MLS_FUNCTION: APRIL 29, 2010 04:32:43
  
  Language function returned the following languages: U.S.. : APRIL 29, 2010 04:32:43
  
  MLS request completed normally with result error
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  on change of country it works very well, do not know if it is related to the country
  
  Thank you
  Aurélie

  Bill for countries that had problems are added on a mission to the address window

  Thank you
  Aurélie

• Problem with function of Disk Defragmenter

  Running Vista 64-bit Home Premium on desktop Dell 519.  As far as I KNOW, all updates and patches are installed.  Just found out that defrag does not work since Nov 2011.  Has been fixed for the weekly Defrag, but that order happening right now for some reason any.  Of course, the manual defragmentation at this stage took several hours.  The message box now looks like this after that I updated the date information:

  

  Note that the "next scheduled run' is 'never', but 'scheduled defragmentation is enabled.  If I uncheck and together the box "Run on a schedule (recommended)", the next scheduled run is correctly Tuesday, may 6, 2014.  However, when I 'OK' from the window, then re-open it, at the next run yet, said '' never. ''  Whenever I change anything in the box, the 'OK' button becomes usable and clicking on it clears the area of the screen.  This is what it looks like after that I décliqués and reclicked the button "Run on a schedule.

  

  It's what I expected to see, but it is up to the message 'never', as shown in the first screenshot when you click on the OK"" button.  Any wisdom out there on this?  (Please note that I'm not an expert at this and probably won't get a response of type techno)

  Thank you, Bill.

  I posted to this existing topic because I wasn't sure if the glitch was still part of the same program, or even if I had a hardware problem or software.  Thank you very much for these links, I was actually on the phone with Dell when your answer came to my email, and the agent told me to try running the boot CD > computer > DVD player, what has worked.

  I'll put all those links you posted, I think that I will need them while trying to fix my system.  For future questions, I will be careful to post correctly.  Thanks again for your help and your patience!

• Problem with functions ctrl after using MS Keyboard Creator

  I used MS Keyboard Creator 1.4 to make a presentation in Windows 7 and it installed successfully for the most part, but the Ctrl basic functions behave as if I'm always typing in qwerty. I used the alternatives put forward without this problem, and I don't know what is happening. Any ideas?

  I found that I could save and edit directly the keyboard layout source file (.klc) before generating the installation package, and I noticed that (VK_) virtual key codes were in the wrong places. It is then a simple matter to reorganize them and build a new package.  The problem seems to be resolved now.

• Problem with function ArrayItem in DRM

  Hello
  
  I have a list of values separated by a comma. I'm trying to get the first value in the list by using the function "ArrayItem.
  
  But when I give the delimiter as "," is considered a parameter and gives an error like *'DRM-25620: number of parameters for the function 'ArrayItem' invalid. 3 EXPECTED, found 4' *. But here, is actually a delimiter in my initial list of values.
  
  I tried to use, such as ',' and ',' but of no use... each form is treated as parameter and giving same error.
  
  Can you please let me know how we can specify the delimiter in the service.
  
  I hv same tried to use the ReplaceStr function to replace with another character in my watchlist, but there also, is considered as separator parameter in the function.
  
  Thanks in advance

  Hello

  On your delimiter, put the comma of Word inside the brackets []. It should look like this: [decimal]. It will take a comma as separator.

• problem with function

  Dear all
  
  Please help me in creating function, I have "Exchange_Rate" table with the columns tablenumer, tabledate, EUR, USD, CHF, GBP and I have inserted some trade-in values
  

  create or replace function frate (currencyname varchar2)
  return number as
  pvalue number;
  begin
  select :currencyname into pvalue from Exchange_Rate where tabledate = (select max(tabledate) from Exchange_Rate);
  return pvalue;
  end;
  /

  I would like to get the value of the exchange rate when the currency name inserted in function.
  Thank you in advance.
  Rgds
  Krzysztof

  Something is not here. You have made:

  Select frate ('EUR') of Exchange_Rate;

  and got

  Frate (GBP)

  I'll assume that it's a typo. Anyway, the design of your table is incorrect. It is not standard - keep you every change as a separate column. Therefore, you are required to use dynamic SQL statements. And the reason that you're back several lines is that your function is called for each row in the table Exchange_Rate. As I have noted, it is preferable to add the date as function parameter:

  create or replace
    function frate(
                   p_currencyname varchar2,
                   p_date date
                  )
      return number
      as
        v_pvalue number;
      begin
          execute immediate 'select ' || p_currencyname ||' from Exchange_Rate where tabledate = :1'
            into v_pvalue
            using p_date;
          return v_pvalue;
  end;
  /
  

  Now:

  select  frate(
                'EUR',
                max(tabledate)
               )
    from  Exchange_Rate
  /
  

  I will give you what you need. But once again, your design is wrong. Each currency should be a separate line.

  SY.

• Problem with function first_value Analytics

  I can't understand how to modify my code due to the change in needs.
  
  My previous requirement was to show the value of the column NAME corresponding to the maximum DUE_DT for which I wrote the following SQL code.

  WITH T AS
  (
  SELECT 'R1' as row_id, 'N1' as name, '1-jan-2012' as start_dt, '1-nov-2012' as due_dt, 'Done' as status  FROM DUAL UNION ALL
  SELECT 'R1', 'N2', '2-jan-2012', '2-nov-2012', 'Pending'  FROM DUAL UNION ALL
  SELECT 'R1', 'N3', '3-jan-2012', '3-nov-2012', 'Done'  FROM DUAL UNION ALL
  SELECT 'R1', 'N4', '4-jan-2012', '4-nov-2012', 'Unassigned'  FROM DUAL UNION ALL
  SELECT 'R2', 'N1', '3-feb-2012', null, null FROM DUAL UNION ALL
  SELECT 'R2', 'N2', '2-feb-2012', null, null FROM DUAL UNION ALL
  SELECT 'R2', 'N5', '1-feb-2012', null, null FROM DUAL )
  SELECT row_id, First_value(due_dt)  OVER (PARTITION BY row_id ORDER BY due_dt desc NULLS LAST) output
  FROM t;

  However, now, the requirement was changed to indicate the value of column NAME corresponding to the maximum DUE_DT and STATUS = 'Done' and DUE_DT AND START_DT are not null.
  
  If the output of the SQL should change;
  R1 3 November 2012
  R1 3 November 2012
  R1 3 November 2012
  R1 3 November 2012
  Value null R2
  Value null R2
  Value null R2
  
  
  PS - I can not add filters to the WHERE clause, use GROUP BY, use the subquery, inline query since this is just a part of the whole SQL. I expect a few CASES WHEN / some other analytical to arrive at the solution function.

  user10566312 wrote:
  I can't understand how to modify my code due to the change in needs.
  ...
  However, now, the requirement was changed to indicate the value of column NAME corresponding to the maximum DUE_DT and STATUS = 'Done' and DUE_DT AND START_DT are not null.

  As you say, one way is to simply make your requirement as an expression box:

  WITH T AS
  (
  SELECT 'R1' as row_id, 'N1' as name, '1-jan-2012' as start_dt, '1-nov-2012' as due_dt, 'Done' as status  FROM DUAL UNION ALL
  SELECT 'R1', 'N2', '2-jan-2012', '2-nov-2012', 'Pending'  FROM DUAL UNION ALL
  SELECT 'R1', 'N3', '3-jan-2012', '3-nov-2012', 'Done'  FROM DUAL UNION ALL
  SELECT 'R1', 'N4', '4-jan-2012', '4-nov-2012', 'Unassigned'  FROM DUAL UNION ALL
  SELECT 'R2', 'N1', '3-feb-2012', null, null FROM DUAL UNION ALL
  SELECT 'R2', 'N2', '2-feb-2012', null, null FROM DUAL UNION ALL
  SELECT 'R2', 'N5', '1-feb-2012', null, null FROM DUAL
  )
  SELECT row_id
       , First_value(due_dt)  OVER (
           PARTITION BY row_id
           ORDER BY case
                       when status = 'Done'
                        and due_dt is not null
                        and start_dt is not null
                       then due_dt
                       else null
                    end desc NULLS LAST
         ) output
  FROM t;