problem with my ssd + fast boot technology.

Similar Questions

• Strange problem with Windows Vista / & Dual Boot of Win 7, Vista is there, but is not...

  I have sucessfully partioned primary SATA drive in my old Dell XPS desktop computer for 1 year so I could dual-boot between Visat & Win 7, but that the process be re-sizing / partitioning, or installing Windows 7 posed problem with dual booting (MBR) which I was able to fix via the process of startup repair & recovery.

  Unfortunately, when I try to boot into Vista from the Boot Manager screen, I can get as far as the Welcome screen and then the screen turns white.  At some point, I think I saw an error message referring to a bad or Rundll file missing (I think it is)

  However, if the blank screen, I can do a Ctrl-alt-del and bring up the options menu to lock the computer, switch users, log, change password or start the Task Manager.  When I select the Task Manager, I see several Services & processes running.  It seems that Vista is running, but I can't do it...

  If I select log-off, I get the newspaper colorful off the screen.

  Any idea?

  Should I continue with the process of startup repair & recover?  I don't think the fix bootrec applies more, correct?   In addition, I unfortunately do not have the CD original Vista because it is a Dell system with all the stuff of recovery on the hard drive... (GRRRR!  ) which I think is a no recovery before I changed them were leaving...

  Thank you!

  Try this for Vista startup repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to configure fast boot technology intel (SSD caching) on a H8XT

  Someone at - it any information on that?

  Hi Sean,.

  Intel Rapid Start technology is defined by Intel in this Intel product and also this paper Intel.

  HP has not announced as part of the HX8t technological platform.

• Fast boot technology Intel does not appear to be installed

  How can I get rid of this message?

  It's a HP Envy Notebook dv7, D0X38EA #ABU

  I have not updated any part of the material - it is set up as it came out of the box. It is running 8.1 Win

  I looked through the forum and download the manuals and everything becomes extremely technical very quickly.  So I downloaded a driver from intel and he says: "this computer does not meet the minimum requirements for installing the software.

  I'm just a simple user. I can guess that the Intel thing will be the fastest computer starts. That would be nice, but I'm not qualified to start faffing autour in BIOS. Nor do I want to be.

  Please tell me how do the message disappears. It's boring.

  Hello @Gatasblancas,

  Welcome to the HP Forums assistance. I completely understand your problem and your reluctance to go into the BIOS.  If you don't feel able to do then by all means to stay outside.  Please provide information on your system as well.  Now, there's only one way to deal with this and it does not need to go into BIOS.  Here is a link that you can walk through the steps needed.

  Technology Intel Quick start.

  Now you can have not improved or changed anything it may have been caused by an update which took place automatically.

  If you are unable to work through this with the link I posted for you.  I would contact phone support to guide you through it.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Phone support by region.

  I hope this helps.

  Thank you for posting.

• Problem with some tools of boot F8.

  When I try to use F8 Memory Diagnostic tools, system repair, they start but then the laptop just off halfway through it. Windows starts fine however. Any ideas please?

  Hello

  Be sure and run checkdisk.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• SSD to boot the system

  I boughta want 700-200Z computer (has not yet happened) but I couldn't buy it with an SSD for boot purposes because this option was not available.

  Is there a special reason for it? May be that this arragenment is not recommended?

  If in fact start with a SSD is an acceptable option, please advise on this.

  If possible where can I get such a device.

  Thanks in advance.

  Juan

  Hello:

  This was really helpful.

  Thamks so much.

• Hi, did anyone know if I can replace the hard drive on my hp dv7, 4069wm with a SSD?

  my computer won't start, it won't cross the windows logo.  then I ran the test drive and hard drive 1 has failed the TDD.  It came with

  Failure ID: 94L 391 - 54M89M - XD003G - 60WW03

  Product ID: WQ865UA #ABA

  Windows 7 is installed

  He passes the Test of memory and the Tet Smart but failed the short DST.  I would like to replace it with an SSD, but don't know if it will work? I also want to upgrade the RAM.

  a third of the screen is dead, so this too must be replaced.  I so want to update as much on it as possible but do not know if it will be useful in the long term.  can anyone help?

  8GB is the max RAM for your laptop. Just do a search on Google with HP dv7-4069wm and memory upgrade as keywords.

  Guaranteed only purchase compatible mempry modules suppliers.  Replace the 2 GB installed with two 4 GB memory modules.

  I have never had problem with discs SSD OCZTechnology. I give them my preference between the two products you requested.  OCZ has the best support in the industry of memory.  My experience with the OCZTechnology to give them a big thumbs up for the quality of the products and support.

• L70 - A problem SSD - no boot device satellite upgrade

  Hi all

  I decided to get any help here, after almost a week of fighting with the upgrade of my Satellite L70-A-118 with a SSD internal SiliconPower. Drive HARD conventional is installed, everything is perfect and computer starts every time. But when I connect SSD it is very reliable, which gives the "no boot device - please reboot ' message from time to time, or several times in a row. This kind of behavior is OS independent (I tried windows 7 and several Linux distributions) and after searching the Internet, I am convinced that it is the problem of BIOS. Initially, the version of the BIOS was 1.00, and I read that the upgrade to 1.20 should solve the problem. So I did, and nothing happens, I want to say that the DSS kept as unpredictable as before the start. Taking things methodically, then I upgraded for all available versions of BIOS (1.30 and 1.50 and 1.60) and Yes, since 1.50 the ssd boots correctly in 8 cases of 10, so it's an improvement, but still far from perfect.

  The problem with SSDrives of many manufacturers and Satellite L50 L70 is common and have been reported (see https://forum.toshiba.eu/showthread...formance-issue ). Unfortunately, none of the solutions I found on the internet works for me. No matter what system I am running and what settings are enabled in the BIOS (AHCI/compatibility; Boot from the UEFI/CMS; Performance/Battery). It seems that the ssd drive sometimes is not recognized by the BIOS on power on or restart it, but I can't understand what is the reason for this: after «no device startup...» ', it is sometimes sufficient to press ctl-alt-del to warm restart it and it goes as it should, but sometimes you can press the dozen times and the same message. Cold start is usually better, but not always. And I have no problem with the start-up of this particular drive on other machines.

  Help or the direction where pick up because it would be very appreciated. No matter what expirience with the L70 upgrade with ssd also. Thank you for your attention and your time.
  Peter.

  PS. honestly, the screen "toshiba leading innovation" is the most annoying more trying to fix my problem.

  Is there a boot option secure in the BIOS? If so turn it off, you can also watch the boot sequence and make sure the SSD drive starts first. Other than that, it could be something to do with the HARD drive itself. This could be a thing of tension, either caused by the SSD to ask for more than what the motherboard can provide for her or the CMOS battery itself goes flat. It is difficult to say what exactly cause your problem because it is incompatible, but to check if your card mother try running the laptop with a low battery and see how it compares to a battery full, try it plugged and plugged not able to check the behavior of the splash screen. To check if this is the CMOS battery, you can open your machine and extract it and warm a bit with your hands before you put it back in the machine and put in operation again. This will add about 0.3 volts again in the stack that can start the system again normally. If it works, then you need to replace the CMOS battery because it is at the end of his life.

• Problems with ImageAssist on the machines using SSDS m2 (NOT is)

  Hello guys,.

  first of all, I must admit, I am facing ImageAssist the first time, so maybe I m ask stupid or boring. I tried the search within this Forum, but didn t get results...

  Okay, so here´s I want to do... our new generation of material (E7270, E5570, OptiPlex7040 far, precision 7710) must be distributed to our subsidiaries around the world. Sometimes they must implement a customer, so I want to create a Sysprep Image BASE + APPS, which I can send to these guys here.

  Here´s so what I've done (problem follows when restoring my Image)

  for example allows to take the E5570, 8 GB of RAM, 256 SED m.2SSD. I installed Win7x64 Enterprise with a Microsoft ISO in a virtual machine using VMWare Workstation 11. My VM config: 4 GB of RAM, 60 GB HD, network in bridged Mode, turn off sound and VM printer and here my first question:

  Inside VM:BIOS or EFI Mode and drive hard ACHI or SATA Raid or SCSI mode? OK, I m prepared and tried all the...

  so after installing win7 and .net 4.5.2 (VMWare Tools also, for the use of slides &) and 2 Reg settings with regard to our environment (MaxTokenSize = 65535 and EnableLUA = 0) I created my BASE Image/Snapshot.

  After you add a few packages of software, I created my BASE + APPS (always with VMWare Tools).

  Next step, uninstall VMWare Tools... restart, after this judgment. now boot into DELL's PE and I created our MaintenanceImage to a network drive. So far all is working well, so I used the installation without assistance-creator tool and define our values (name & Company, selectable language, workgroup, computer name must be completed by the regional IT guy, and I checked to copy the profile to the default user profile... that s he)

  Validation tool crossed without moaning, capturing also...

  I sliced two of the Image (about 10 GB) to some 2 GB and copied on our USB key for testing purposes...

  Stick plugged USBPort E5570, restored, added DELL drivers CAB files and after restoration, the E5570 started Win7x64 for the first time... everything worked fine, etcpp... devices to about 90 percent of the first boot, I get the message: "Windows cannot configure one or more system components. TI install Windows, reboot, and re-install Windows.

  Hope someone could snap this suspicion to my face :D

  I also tried a BIOS/MBR Installation with the 7710 of precision using a standard 2.5 "SSD... I didn t get an error or a problem with this one... restroing & syspreping went well

  Waiting for lots of helpful tips to fix this :)))

  Best wishes & greetings from Germany

  CHRIS

  Hello Tyler,

  Problem solved, everything works like a charm...

  Thx for your help...

  Got the wrong information of the German support. I tried some things over the weekend, and now it works.

  Kind regards...

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• Faster boot SSD for Mac Pro 5.1

  The Samsung SM951 AHCI is still the SSD faster that you can boot from on the Mac Pro 5.1? Someone understand how boot from NVMe on the Mac Pro 5.1 yet?

  Samsung SM951-NVMe Versus AHCI or SATA 850 Pro.

  < published by host >

• Problem with usb boot on Satellite A-50

  Hello
  I had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios?

  Greetings,

  Hello

  You can try to press F12 when the Toshiba screen! A small start menu appears. Choose USB - FDD and then it should work.

  Campino Bye

• Problem with message PadExe.exe occurs at boot

  On booting, which takes anything up to 30 minutes and more, I get a message that there is a problem with PadExe.exe
  Padhook.dll seems to be the problem. Put PadExe or PadExe.exe in the search engine on the Toshiba site reveals no response.

  Anyone know how I can fix this problem? I can live with the slow start (just do not cut!)
  Thanks for any help.
  Ray

  This could be a part of the Toshiba Touch and launch software.
  Toshiba Touch and launch offers easy movement and the freedom of navigation of programs with TouchPad
  I see only one way to resolve these error messages. Try to remove this software from the operating system and after removal clean and start you should install it again.

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.