Problem with navigation toolbars

Similar Questions

• Problems with my toolbar menu and start pin

  While typical work on the internet, my browser closed its own and restarted my computer. Once again, it does the same thing: closing the browser and restart. Next time, that it restarted, I got a continuous pop to the top of a windows application requesting permission to access my computer (I have never launched and continually decreased). Then I had a series of pop ups and warnings, etc.

  Now, when I opened my Start menu, everything disappeared except 'all programs', 'search' and 'close '. Also, the icons located next to the time and date in the lower corner expanded how to a third party in the toolbar with no option to shrink. Finally, everything that had already been pinned to the toolbar disappeared and when I open a folder or a browser, it appears broadly and do not stack so organized, similar to how previous windows systems displays this information.

  How can I find these questions to their normal state?

  Hello

  What antivirus application is installed on the computer?

  I suggest you follow these methods and check.

  Method 1:

  Step 1: Restart your computer in safe mode and check if the icons are moved.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, try to perform a clean boot in order to find the root cause.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Accidents with internet explore, check out this link:

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Also perform a full service scan using the Microsoft Safety Scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 2: Run the system restore.

  Restore the computer to the date where it worked great:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps!

• Strange problem with navigation (MBA13, Yosemite)

  Hello!

  I got a MacBook Air13 (always on Yosemite 10.10.5) since almost a year and it was just fine until recently he started to do strange things with my Internet.

  First he started having problems with the speed but that has been done because of the crappy router. But now it opens only some pages (and it actually decently fast) such as Facebook, YouTube, Apple, and all Google services (and oddly enough my page of the University Library, so I crossed out of the conspiracy theory) but it just goes no further. It doesn't matter if I use Firefox or Safari.

  I tried to play with DNS and locations, clear cookies, thus freeing up space and all the usual stuff. Also checked the Internet connection, but that's fine. And I don't see anything that I did different than usual...

  Maybe someone has an idea what is the problem?

  D.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• MAJOR problem with navigation on android phone

  Hey guys,.

  Not sure if this is the case with android phones just but I can say that Web sites I have on muse, have a problem with the text boxes when you zoom in above.

  If you visit www.localsportsgroup.com.au on your mobile, it should display very well. BUT if you pinch zoom in on the text because the text box button at the end of your screen it actually breaks the flow of text and restocking it.

  This should really be addressed as it breaks the flow of the Web sites. Using m8 htc with android default browser.

  Screenshots below-

  

  Problem solved-

• Problem with navigation of the fonts in Illustrator

  HI, I just downloaded a large number of fonts to use for a logo design for free
  I have never had any real problems with the fonts in Illustrator (I use CS4 on PC)

  but some (10%) of these (new) fonts does not work properly in illustrator (works fine in Flash, InDesign and Photoshop)
  which means that when I browse through fonts it often happens that the selected font jump to the police either first or last in the system
  (which is really boring and steals a lot of time)
  I know I could do the (very) hard and simply eliminate a police every time I meet the problem, but it would be extremely time-consuming
  (I have about 3000 fonts now, 30-40 are commercial fonts, the rest are free fonts, downloaded from the web).

  ideas, solutions, comments?

  
  NOTE: 'Normally' I use Flash to browse the fonts for these types of jobs (is the best and don't crash, jump or spoil)
  but it would be great if I could work with illustrator too (what I sometimes when you use categories with many filters/effects)

  The best

  M6

  *************************************

  You are browsing the fonts with the arrows on your keyboard?

  Turn off "enable protection of glyph" in preferences

• AS3 problem with navigation button

  I'm going to have trouble getting this code works I've linked to a button I want to access this page within my current browser window can someone tell me what is the problem with this code and how to fix

  This is the error I getwhen I clicked

  TypeError #2007:perameter url must be non-null

  var url: String = ("http://www.google.com/'");

  google_btn.addEventListener (MouseEvent.MOUSE_DOWN, function (): void {})

  navigateToURL (new URLRequest, "_self") ;}

  );

  I'm officially withdrawing my brain for the day... added: evt:MouseEvent

  home_btn.addEventListener (MouseEvent.MOUSE_DOWN, downHandler);

  function downHandler(evt:MouseEvent):void {}

  navigateToURL (new URLRequest (url), "_self");

  }

• Problem with navigation on the desktop, Tablet and phone menu

  I created the website www.yorensa.nl to desktop, Tablet and phone. In the overview of the site, the navigation menu does not work properly.

  Office: When I choose the "news" button, I can't navigate any further.

  Tablet and phone: Navigation does not work.

  I published the site by ftp, so you can take a look.

  Please help me solve this problem.

  Hello Lena,.

  This has been answered here: http://forums.adobe.com/message/5802805#5802805

  See you soon

  Parikshit

• I have a problem with a toolbar called searchqu I remember not install, it does not allow me to have MSN as my home page, I removed the add on but still have the problem. Thoughts?

  had an add on searchqu somehow called installed. He does not think I have msn as my homepage. I removed add it on and still have the same problem.

  See the pages on searchqu and these discussions:

  • [816181/questions/816181]
  • [790833/questions/790833]
  • http://bit.LY/searchqutoolbar
  • http://www.ilivid.com/FAQ.htm#8

• Problems with secondary toolbars in Photoshop CC 2014.

  Some of my toolbars have stopped working.  For example, in the past when I used the quick selection tool a secondary tool bar, under the main top toolbar, send me options to add, subtract, etc from selection.  Now I don't see the side toolbar.  Do not see it on any of the action items... The culture used to give me report options and an option to accept, not there now.  I am running Windows 8.1 and the only recent change I did was download Lightroom CC 2015 (which should not affect PS).  Any suggestions?

  I think what you call high school's Toolbar Options bar.

  To make it visible, go to the window and low wear the bottom of the dropdown Options check mark

• Problem with navigation report

  Hi Experts,
  
  Pls help me.
  
  I have 2 reports summary report and detailed report...
  
  Summary of the report I did in pivot mode and I placed a column in the column section, so... the column values are apearing as a column in the report...
  I use only one measure...
  When the user clicks on this measure, it must navigate to the detail report...
  in the report in detail, I placed a few columns... and all the synthesis report are columns is invited...
  the problem... is wen by clicking on the measured value it sails, but the data are not filtering appropriatly.and is not seggregating is...
  
  CAB someone give me an idea... pls

  Bilel dear,

  1 make sure you have "is prmmpted" the same column that you use in summary. (copy - paste the column fx summary report in detail, while he is invited)

  2. If above things are. It should encourage.

  3. you check this by clicking on the summary and the physical motion or detailed report.
  You'll Carlo to whether or not the fileters are transmitted.

  Check if help/correct.
  Bachelot

• Edit_TextItem problem with the toolbar

  We have a toolbar to copy and paste on all our forms.
  
  When we use the Edit_TextItem; built in us, they are disabled.
  
  How can I inherit from the toolbar in an editor?

  I think that your need is not possible. The edit text element is like a modal dialog box, and you can't do anything unless you close this dialog.

  François

• Problem with Navigation

  Hi all
  
  I have a report with date filter. The guest is between. And in the report on the date column is invited.
  
  When I click on a measure value-> I need navigate to a detailed report by the way the other settings like client, product etc, but to date it should focus on the whole of the period, that is, from beginning to end date not only the value of the date attributed to the cell, I'm clicking on.
  
  So if I give you my second report is of course invited he will choose only one value for date related to the value of the cell.
  
  Is there a way I can achieve this?
  
  Thank you
  deep

  Deep says:
  Hi all

  I have a report with date filter. The guest is between. And in the report on the date column is invited.

  When I click on a measurement value--> I need navigate to a detailed report by the way the other settings like client, product etc, but to date it should focus on the whole of the period, that is, from beginning to end date not only the value of the date attributed to the cell, I'm clicking on.

  So if I give you my second report is of course invited he will choose only one value for date related to the value of the cell.

  Is there a way I can achieve this?

  Thank you
  deep

  Follow these steps:

  (1) create your prompt with PVs like this:

  http://oraclebizint.WordPress.com/2008/02/26/Oracle-BI-EE-101332-between-prompts-for-date-columns-using-presentation-variables/

  (2) in your main report and the report destination, add filters to the dates using the PVs and the BETWEEN operator as indicated in the link above.

  (3) put the command prompt in the dashboard in the upper part.

  (4) to the main report in a separate below section. Ensure that the display of the report is «incorporated in the section»

  What is happening is this: the line at the top of the dashboard Dashboard will filter the main report and to report. The Interaction of value will be the value that you clicked on and to report will be filtered by the two.

• Problem with my toolbar

  I just opened my InDesign CS3 for the first time after taking a training course on how to use it. In the class, I learned that when you see a small black triangle at the bottom right of a tool button you can right click and it will show other options for you to choose. When I right click in my toolbar on such a button, nothing happens. I can't choose a different option. Can anyone help?

  You learned wrong or you have forgotten. You can alt/opt + click to scroll tools or click and hold to display the choices.

  Bob

• Problem with navigation blackBerry Smartphones

  At the beginning I was able to navigate normally using the data from my mobile provider package, recently I was not able, in the options of the browser the default configuration of the browser is set to Wi - fi browser in option one, who previously would have had Internet browser as an option as well. Is it possible to reset to factory settings so I can navigate through the corpus of data again and not thinking wireless only.

  Go to Options > Advanced Options > host Routing Table. Press the Menu key, then select Save now.

• I'm having a problem with the tabs is not responding after deleting localstore.rdf

  After the 4.0 update b7, I had a problem with my toolbar to reset and (a little), I corrected by deleting localstore.rdf. Now, however, my tabs do not respond when you click them, and Firefox is essentially locked on the first tab ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: a new profile