Problem with navigation report
Hi Experts,Pls help me.
I have 2 reports summary report and detailed report...
Summary of the report I did in pivot mode and I placed a column in the column section, so... the column values are apearing as a column in the report...
I use only one measure...
When the user clicks on this measure, it must navigate to the detail report...
in the report in detail, I placed a few columns... and all the synthesis report are columns is invited...
the problem... is wen by clicking on the measured value it sails, but the data are not filtering appropriatly.and is not seggregating is...
CAB someone give me an idea... pls
Bilel dear,
1 make sure you have "is prmmpted" the same column that you use in summary. (copy - paste the column fx summary report in detail, while he is invited)
2. If above things are. It should encourage.
3. you check this by clicking on the summary and the physical motion or detailed report.
You'll Carlo to whether or not the fileters are transmitted.
Check if help/correct.
Bachelot
Tags: Business Intelligence
Similar Questions
-
Problem with the report and the system of axis 2d
Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.
What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).
With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.
I tried everything, but I could not remedy
I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)
Any help will be appreciated, thanks in advance
Ierman
I'll post my code here:
Dim Xscale, Yscale
XScale = Array (0,25,0,5,49)
Yscale = Array(-0.2,0.2,-0.2,10,4)
Call PicDelete()
Call GraphObjNew ("2D-Axis", "2DAxis1")
Call GRAPHObjOpen ("2DAxis1")
D2AxisTop = 1D2AxisBottom = 70
D2AxisLeft = 1
D2AxisRight = 1
Call GRAPHObjOpen ("2DYAxis1_1")
D2AxisyScaleType = "manual".
D2AXISYBEGIN = Yscale (0)
D2AXISYEND = Yscale (1)
D2AXISYORIGIN = Yscale (2)
D2AXISYTICK = Yscale (3)
D2AXISYMINITICK = Yscale (4)
Call GRAPHObjClose ("2DYAxis1_1")
Call GRAPHObjOpen ("2DXAxis1_1")
D2AxisxScaleType = "manual".
D2AXISXBEGIN = Xscale (0)
D2AXISXEND = Xscale (1)
D2AXISXORIGIN = Xscale (2)
D2AXISXTICK = Xscale (3)
D2AXISXMINITICK = Xscale (4)
D2AxisXTxt = ""D2AxisXColor = 'black '.
D2AxisXTickAuto = 1
D2MTickLineWidth (1) = 0.1
D2MTickLineType (1) = "solid".
D2AxisXTickSize = 60
D2AxisXTxtAutoCo = 0
D2MTickColor = "red".
Call GRAPHObjClose ("2DXAxis1_1")
Call GraphObjNew("2D-Curve","New_Curve")Call GraphObjOpen ("New_Curve")
D2CCHNX = "[1] / [1]" "
D2CCHNY = "[1] / [2]" "
D2CurveColor = "red".
Call GraphObjClose ("New_Curve")
Call GRAPHObjClose ("2DAxis1")Dim Xscale1, Yscale1
Xscale1 = Array (25,50,0,5,49)
Yscale1 = Array(-0.2,0.2,-0.2,10,4)
Call GraphObjNew ("2D-Axis", "grafic")
Call GRAPHObjOpen ("grafic")
D2AxisTop = 40D2AxisBottom = 37
D2AxisLeft = 1
D2AxisRight = 1
Call GRAPHObjOpen ("2DYAxis1_2")
D2AxisyScaleType = "manual".
D2AXISYBEGIN = Yscale1 (0)
D2AXISYEND = Yscale1 (1)
D2AXISYORIGIN = Yscale1 (2)
D2AXISYTICK = Yscale1 (3)
D2AXISYMINITICK = Yscale1 (4)
D2AxisYTxt = "" ' testo asse label y
Call GRAPHObjClose ("2DYAxis1_2")
Call GRAPHObjOpen ("2DXAxis1_2")
D2AxisxScaleType = "manual".
D2AXISXBEGIN = Xscale1 (0)
D2AXISXEND = Xscale1 (1)
D2AXISXORIGIN = Xscale1 (2)
D2AXISXTICK = Xscale1 (3)
D2AXISXMINITICK = Xscale1 (4)
D2AxisXTxt = «»D2AxisXColor = 'black '.
D2AxisXTickAuto = 1
D2MTickLineWidth (1) = 0.1
D2MTickLineType (1) = "solid".
D2AxisXTickSize = 60
D2AxisXTxtAutoCo = 0
D2MTickColor = "red".
Call GRAPHObjClose ("2DXAxis1_2")
Call GraphObjNew("2D-Curve","New_Curve1")Call GraphObjOpen ("New_Curve1")
D2CCHNX = "[1] / [1]" "
D2CCHNY = "[1] / [2]" "
D2CurveColor = "red".
Call GraphObjClose ("New_Curve1")
Call GRAPHObjClose ("grafic")Hi lerman,.
Here is an edited version of your code that works on my computer. A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels. The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.
Brad Turpin
Tiara Product Support EngineerNational Instruments
-
Strange problem with navigation (MBA13, Yosemite)
Hello!
I got a MacBook Air13 (always on Yosemite 10.10.5) since almost a year and it was just fine until recently he started to do strange things with my Internet.
First he started having problems with the speed but that has been done because of the crappy router. But now it opens only some pages (and it actually decently fast) such as Facebook, YouTube, Apple, and all Google services (and oddly enough my page of the University Library, so I crossed out of the conspiracy theory) but it just goes no further. It doesn't matter if I use Firefox or Safari.
I tried to play with DNS and locations, clear cookies, thus freeing up space and all the usual stuff. Also checked the Internet connection, but that's fine. And I don't see anything that I did different than usual...
Maybe someone has an idea what is the problem?
D.
-
MAJOR problem with navigation on android phone
Hey guys,.
Not sure if this is the case with android phones just but I can say that Web sites I have on muse, have a problem with the text boxes when you zoom in above.
If you visit www.localsportsgroup.com.au on your mobile, it should display very well. BUT if you pinch zoom in on the text because the text box button at the end of your screen it actually breaks the flow of text and restocking it.
This should really be addressed as it breaks the flow of the Web sites. Using m8 htc with android default browser.
Screenshots below-
Problem solved-
-
Problem with navigation of the fonts in Illustrator
HI, I just downloaded a large number of fonts to use for a logo design for free
I have never had any real problems with the fonts in Illustrator (I use CS4 on PC)but some (10%) of these (new) fonts does not work properly in illustrator (works fine in Flash, InDesign and Photoshop)
which means that when I browse through fonts it often happens that the selected font jump to the police either first or last in the system
(which is really boring and steals a lot of time)
I know I could do the (very) hard and simply eliminate a police every time I meet the problem, but it would be extremely time-consuming
(I have about 3000 fonts now, 30-40 are commercial fonts, the rest are free fonts, downloaded from the web).ideas, solutions, comments?
NOTE: 'Normally' I use Flash to browse the fonts for these types of jobs (is the best and don't crash, jump or spoil)
but it would be great if I could work with illustrator too (what I sometimes when you use categories with many filters/effects)The best
M6
*************************************
You are browsing the fonts with the arrows on your keyboard?
Turn off "enable protection of glyph" in preferences
-
AS3 problem with navigation button
I'm going to have trouble getting this code works I've linked to a button I want to access this page within my current browser window can someone tell me what is the problem with this code and how to fix
This is the error I getwhen I clicked
TypeError #2007:perameter url must be non-null
var url: String = ("http://www.google.com/'");
google_btn.addEventListener (MouseEvent.MOUSE_DOWN, function (): void {})
navigateToURL (new URLRequest, "_self") ;}
);
I'm officially withdrawing my brain for the day... added: evt:MouseEvent
home_btn.addEventListener (MouseEvent.MOUSE_DOWN, downHandler);
function downHandler(evt:MouseEvent):void {}
navigateToURL (new URLRequest (url), "_self");
}
-
Problem with output report layout
Hi friends,
This isn't problem Oracle D2K. ;)
I did a report in Oracle PL/SQL. And, when I spool the data he fragments he came out in several lines. Despite I took in charge of the issues.
Now, let me explain->
I used a function in pipeline and store the result using the command of the coil.
What I found strange, this is the type of object that is a clob data type is split in fact lines after 80 characters as in the case of string, it continues to 4000 characters.
Now, in my solution, ordering channels made big role as all the lines indicate a different meaning and so pinched the data accordingly.
I did a small test in that regard, and I am paste here that - because I am not allowed to post here my original due to the policy of the company code.
Why is this it is break line after 80 characters? Alternatively, where I'm missing?scott>select * from v$version; ----------------------------------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod PL/SQL Release 10.2.0.3.0 - Production CORE 10.2.0.3.0 Production TNS for 32-bit Windows: Version 10.2.0.3.0 - Production NLSRTL Version 10.2.0.3.0 - Production Elapsed: 00:00:00.18 scott> scott>create table clob_dummy 2 ( 3 cola clob 4 ); Table created. Elapsed: 00:00:04.40 scott> scott>insert into clob_dummy values('&clb'); Enter value for clb: Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdj dbs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh shgghsga wshkwlsgsdklghlahgkh lahgkas lhks kglaks gksh a old 1: insert into clob_dummy values('&clb') new 1: insert into clob_dummy values('Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio po 1 row created. Elapsed: 00:00:00.08 scott> scott>commit; Commit complete. Elapsed: 00:00:00.01 scott> scott>select * from clob_dummy 2 ; COLA -------------------------------------------------------------------------------- Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd Elapsed: 00:00:00.27 scott>set long 400000 scott> scott>set lin 2000 ---- As you can see i've set the linesize to 2000 scott> scott>set serveroutput on scott> scott> scott>select * from clob_dummy; COLA -------------------------------------------------------------------------------- Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd bs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh shgghsga wshkwlsgs dklghlahgkh lahgkas lhks kglaks gksh a Elapsed: 00:00:00.11 scott> scott> scott>select length(cola) res from clob_dummy; RES ---------- 199 Elapsed: 00:00:00.08 scott>insert into clob_dummy values('&clb') 2 ; Enter value for clb: ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhkl hkddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehglegighsihdlk eltiweyt ilhdhgehgisehbkd old 1: insert into clob_dummy values('&clb') new 1: insert into clob_dummy values('ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhld 1 row created. Elapsed: 00:00:00.03 scott> scott>commit; Commit complete. Elapsed: 00:00:00.08 scott> scott>select * from clob_dummy; COLA -------------------------------------------------------------------------------- Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd bs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh shgghsga wshkwlsgs dklghlahgkh lahgkas lhks kglaks gksh a ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhklh kddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehgle gighsihdlk eltiweytilhdhgehgisehbkd Elapsed: 00:00:00.11 scott> scott> ----- Still it is breaking the line after 80 characters.
But when I changed the varchar2 data type, it is good way.
May I know what is the reason? Then I fixed using the clob data type? Or will I have to change to varchar2? Because, I need only single record line (any size is - this - but of course oracle time) when I wrap the output to a file.
Please share your thoughts with me.
Thank you.It may be related to longchunksize SQL layout * more. Have you tried a similar to your set linesize value assignment:
set longc 2000
It can also be bound to the version of SQL * more you use. I notice some differences between sqlplus (command line version) and sqlplusw (the windows gui version)
-
Problem with interactive report
Hi all
I use Apex 4.2
I have an interactive in which I activated the filtering and sorting.
When I click on one of the column in the interactive report, saying: "LAST NAME", it shows me the filtering and sorting options drop down.
The poster also available name drop extracted from the query, but it shows me some range of name pronounce A - C only.
I have family with starting with another letter also names, but those names are not displayed.
For some columns displays the values of A to E, but not the full list.
How to display the entire list in this fall down.
Kind regards
Jean-Louis Patel.
Hi Alice,.
Because of interactive report performance, it loads only a few filters.
If you change the column definition for the column, under set the Filter Type of column to one of the other options like 'User defined list of values to exact match filter' from the list of values. You can then specify the query used to generate this list. You could use something like what listed below to grab the first 20000 records.
Select *.
from (select name
WCP
em order by name)
where rownum<=>=>
But don't forget, it will always affect your performance of interactive report page.
Or alternatively, you can use this link:
http://tpetrus.blogspot.in/2012/05/interactive-report-filtering-in-apex.html
-Sunil Bhatia
-
Problem with the report as a button link
Apex 3.2
I had a relationship with a column of link to another page.
The user wanted a button instead of one of the standard icons, so I change the link text to
< button type = "button" > Clean < / button >
If I use firefox, then this link works very well, but in IE, nothing happens when I click on the button.
Gus
Hello
Perhaps this example help
https://Apex.Oracle.com/pls/Apex/f?p=39006:35
I created request report
SELECT empno, ename, job, APEX_UTIL.PREPARE_URL('f?p=&APP_ID.:37:&APP_SESSION.::&DEBUG.::P37_EMPNO:' || empno,NULL,3) AS linkurl FROM emp
Then I change the LINKURL Link Text column
Link attributes
class="hideMe508"
Target URL and URL # (sharp right)
Kind regards
Jari
-
I got in trouble for days.
I have an updated report updated
It works well and data are saved using a process pageselect p.system system ,p.config config ,apex_item.display_and_save(9,p.jobname) jobname ,apex_item.display_and_save(3,p.parameter) || APEX_ITEM.MD5_CHECKSUM(p.parameter,p.value_char,p.value_number,to_char(p.value_date,'dd.mm.yyyy'),p.param_set) || apex_item.hidden(2,rownum) parameter ,p.value_char value_char_current ,APEX_ITEM.TEXT(4,p.value_char,20,128) value_char_new ,case when p.parameter in ('OBJINCID', 'HISTTRANSFERID') then '<span style="color:#000000;font-weight:bold">'||p.value_number||'</span>' else to_char(p.value_number) end value_number_current ,APEX_ITEM.TEXT(5,p.value_number,10) value_number_new ,case when p.parameter = 'TRANSFERDAY' then '<span style="color:#000000;font-weight:bold">'||to_char(p.value_date,'dd.mm.yyyy')||'</span>' else to_char(p.value_date,'dd.mm.yyyy') end value_date_current ,APEX_ITEM.DATE_POPUP2(6,p.value_date,'DD.MM.YYYY','15','10','style=""',null,null,null,null,null,'both',null,'MONTH_AND_YEAR') value_date_new ,apex_item.display_and_save(7,p.param_set) param_set ,apex_item.display_and_save(8,p.param_type) param_type from etl_job_param p, etl_job_config c where p.config = substr(:P285_CONFIG,instr(:P285_CONFIG,'_')+1) and p.system = :P285_SYSTEM and p.system=c.system and p.config=c.config and p.jobname=c.jobname order by jobsequence
What I have to do is set the value of column value_number_new to null if another pass has a certain value.declare v_count_failed number := 0; v_count_updated number := 0; v_count_failed2 number := 0; v_count_updated2 number := 0; begin for i in 1 .. apex_application.g_f02.COUNT loop --{ if wwv_flow_item.md5(apex_application.g_f03(i) ,apex_application.g_f04(i) ,apex_application.g_f05(i) ,apex_application.g_f06(i) ,apex_application.g_f07(i) ) <> apex_application.g_fcs (i) then --{ p_sup_mnt_apx.pr_230_update_params( :P285_SYSTEM -substr(:P285_CONFIG,instr(:P285_CONFIG,'_')+1) ,apex_application.g_f09 (i) ,apex_application.g_f03 (i) ,apex_application.g_f07 (i) ,apex_application.g_f04 (i) ,apex_application.g_f05 (i) ,to_date(apex_application.g_f06 (i),'DD.MM.RRRR') ,apex_application.g_fcs (i) ,v_count_failed ,v_count_updated); v_count_failed2 := v_count_failed2 + v_count_failed; v_count_updated2 := v_count_updated2 + v_count_updated; --reset variables v_count_failed := 0; v_count_updated := 0; --} end if; --} end loop; :P285_COUNT_FAILED := v_count_failed2; :P285_COUNT_UPDATED := v_count_updated2; END;
So I replaced
with,APEX_ITEM.TEXT(5,p.value_number,10) value_number_new
It appears correctly, but database update fails.,case when p.parameter in ('OBJINCID', 'HISTTRANSFERID') then null else APEX_ITEM.TEXT(5,p.value_number) end value_number_new
If I put the old code and just manually delete the data in the form and save, then it works.
Please help, it drives me crazy
Gus
Published by: Gus C February 6, 2013 03:24It should work for you now. It allows the management of exceptions.
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Apress.com/9781430235125
http://Apex.Oracle.com/pls/Apex/f?p=31517:1
http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
------------------------------------------------------------------- -
I have a report that uses a custom model.
Light blue 15 theme it worked fine.
I changed my theme to 21 scarlet and copied the model, but is no longer functions, that is to say the highlight is ignored
My report is
All the passes are passes standard reportselect owner, table_name, partition_name, subpartition_name, to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss') update_time, to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss') previous, to_char(latest-previous,'dd.mm.yyyy hh24:mi:ss') duration, case when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 120 then 'CC0000' when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 90 then 'FF0000' when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 60 then 'FF6600' when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 30 then 'FF9900' when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 20 then 'FFCC00' when (to_date(to_char(latest,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss')-to_date(to_char(previous,'dd.mm.yyyy hh24:mi:ss'),'dd.mm.yyyy hh24:mi:ss'))*24*60 > 10 then 'FFFF00' else 'FFFFFF' end BG_COLOUR from ( select da.owner, da.table_name, da.partition_name, da.subpartition_name ,(da.stats_update_time) latest, nvl((select max(stats_update_time) from DBA_TAB_STATS_HISTORY where (owner like ('%ADMIN') or owner in (select username from dba_users where default_tablespace='USERS')) and stats_update_time >= to_date(:P840_START_DATE,'dd.mm.yyyy hh24:mi:ss') and stats_update_time <= to_date(:P840_END_DATE,'dd.mm.yyyy hh24:mi:ss') and stats_update_time < (da.stats_update_time)),to_date(:P840_START_DATE,'dd.mm.yyyy hh24:mi:ss')) previous from ( select owner, table_name, partition_name, subpartition_name, stats_update_time from DBA_TAB_STATS_HISTORY where (owner like ('%ADMIN') or owner in (select username from dba_users where default_tablespace='USERS')) and stats_update_time >= to_date(:P840_START_DATE,'dd.mm.yyyy hh24:mi:ss') and stats_update_time <= to_date(:P840_END_DATE,'dd.mm.yyyy hh24:mi:ss') order by stats_update_time asc) da)
My model is
Model name column Type (model line)
Custom class 1 template
Line Template1
Any help appreciated<tr style="background-color:#8#;"> <td style="background-color:#8#;" class="t15data">#1#</td> <td style="background-color:#8#;" class="t15data">#2#</td> <td style="background-color:#8#;" class="t15data">#3#</td> <td style="background-color:#8#;" class="t15data">#4#</td> <td style="background-color:#8#;" class="t15data">#5#</td> <td style="background-color:#8#;" class="t15data">#6#</td> <td style="background-color:#8#;" class="t15data">#7#</td> </tr>
GusGus C wrote:
I changed the template with your code, but still no formatting.
It's the source of the page
Owner | Table Name | Partition Name | Subpartition Name | Start Time | End Time | Duration |
---|---|---|---|---|---|---|
DWHADMIN | CPO_LOAD_STATISTIC | - | - | 10.01.13 21:00:37 | 10.01.13 21:00:04 | +000000000 00:00:33.346524 |