Problem with new table

Similar Questions

• Problem with a table

  Hello

  Sorry for my bad English.

  I have a problem with a table. I made a table with a script, but when I add a new line, this script will not work in the new lines. I know that I have something wrong, but I do not know the solution. Anyboy help me? You can see the file in http://www.frmgm.jazztel.es/duda.pdf. I am new in programming.

  I thank you very much.

  OK, now I understand... each row that you add to the table changes the somExpression for objects (so that they are unique). The repeating subform Gets a case number, but the rest of the phrase remains the same. If you do not include a number of occurrence, then the 1st appearance is supposed to... that is why only the 1st row is affected. You can build expressions so that you can derive the correct number of occurrence. The click event code would look like this:

  If (xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]").) Casillaverificacion1.RawValue == '0') {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = 'hidden ';
  } else {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = "visible";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion1.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "open";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  }

  You can see that the xfa.resolveNode takes a string that represents the object we want to use. The string is then built and the number of occurrence of the Fila1 subform is derived by obtaining the index number of the subform parent of the object that we clicked (this.parent.index). Occurane numbers are wrapped in [] brackets.  The rest has not changed. You will need to update your code to use this technique.

  Hope that helps

  Paul

• Problem with create table as select (DEC)

  Hello
  
  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
  
  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
  
  Or any other solution to solve this problem?
  
  Thanks in advance

  Sweety wrote:
  Hello

  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.

  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).

  Or any other solution to solve this problem?

  Thanks in advance

  No, this is not possible. You need to get the manuscript of dependent object and create it manually.

• Calc problem with fact table measure used in the bridge table model

  Hi all
  
  I have problems with the calculation of a measure of table done since I used it as part of a calculation in a bridge table relation.
  
  A table of facts, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate is SUM. Whenever PROJECT_COST was used with any dimension, the appropriate aggregation was made at appropriate levels. But, no more. One of the relationships that project_fact is a dimension, called PROJECT.
  
  PROJECT_FACT contains details of employees, and every day they worked on a project. So for one day, employee, Joe, could have a PROJECT_COST $ 80 to 123 project, the next day, Joe might have $40 PROJECT_COST for the same project.
  
  Dimension table, PROJECT, contains details of the project.
  
  A new feature has been added to the software - several customers can now be charged to a PROJECT, where as before, that a single client has been charged.
  This fresh percentage collapse is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the project, CUSTOMER_ID, will BILL_PCT. BILL_PCT always add up to 1.
  
  Thus, the bridge table might look like...
  CUSTOMER_ID BILL_PCT PROJECT
  123 100.20
  123 200.30
  123 300.50
  456 400 1.00
  678 400 1.00
  
  Where to project 123, is a breakdown for multiple clients (. 20,.30.50.)
  
  Let's say in PROJECT_FACT, if you had to sum up all the PROJECT_COST for project = 123, you get $1000.
  
  
  Here are the steps I followed:
  
  -In the physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE and PROJECT_BRIDGE (a 1:M) PROJECT.
  PROJECT_FACT = > PROJECT_BRIDGE < = PROJECT
  
  -In the logical layer, PROJECT has a 1:M with PROJECT_FACT.
  PROJECT = > PROJECT_FACT
  
  -Logical fact table source is mapped to the bridge table, PROJECT_BRIDGE, so now he has several tables, it is mapped (PROJECT_FACT & PROJECT_BRIDGE). They are defined for an INTERNAL join.
  -J' created a measure of calculation, MULT_CUST_COST, using physical columns, which calculates the sum of the PROJECT_COST X the amount of the percentage in the bridge table. It looks like: $ (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT)
  -J' put MULT_CUST_COST in the presentation layer.
  
  We still want the old PROJECT_COST autour until it happened gradually, it is therefore in the presentation layer as well.
  
  
  Well, I had a request with only project, MULT_CUST_COST (the new calculation) and PROJECT_COST (the original). I expect:
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123. $1000 $1000
  
  I'm getting this for MULT_CUST_COST, however, for PROJECT_COST, it's triple the value (perhaps because there are quantities of 3 percent?)...
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123 $1000 (correct) $3000 (incorrect, it's been tripled)
  
  If I had to watch the SQL, you should:
  SELECT SUM (PROJECT_COST),
  SUM (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT),
  PROJECT
  Of...
  PROJECT GROUP
  
  
  PROJECT_COST used to work properly at a table of bridge of modeling.
  Any ideas on what I got wrong?
  
  Thank you!

  Hello

  Phew, what a long question!

  If I understand correctly, I think the problem is with your old measure of cost, or rather that combines with you a new one in the same request. If you think about it, your request as explained above will bring back 3 rows from the database, that's why your old measure of cost is multiplied. I think that if you took it out of the query, your bridge table would work properly for the only new measure?

  I would consider the migration of your historical data in the bridge table model so that you have one type of query. For historical data, each would have a single row in the bridge with a 1.0 BILL_PCT.

  Good luck

  Paul
  http://total-bi.com

• The relaity hard layers while no problem with a table centering

  I'll build a Web site using tables, decided this was the best way to get a finish centered on 1024 and 800 without having to learn how to build a website that changes for the user who viewed.
  
  But then I hit a problem. I roll over the buttons that activate one layer show/hide, but it does not work. If I set up properly for 1024, he died in a fourth 800 and so. How to play ball with my table settings?

  -Change

  on this subject.

  
  

  -change

  on this subject.

  
  

  and this-

  on this subject.

  
  

  and see if that helps.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "abdezines" wrote in message
  News:eaoosv$4EE$1@forums. Macromedia.com...
  > I am building a website using tables, decided that it was the easiest way
  > to
  > get a finish centered on 1024 and 800 without having to learn how to build
  > a
  > Web site that changes for the user who viewed.
  >
  > But then I hit a problem. I roll over the buttons that activate a
  > Show/hide layer but it does not work. If I set up properly for 1024,
  > This is
  > off in a fourth 800 and Yes. How to play ball with my table
  > settings?
  >

• Problem with new PC Toshiba laptop

  I don't have good experience with Toshiba as a great brand.

  I brought a new laptop of dicksmith elizabeth her (SR4192426). At the time of the sale, the saleman said if you have a problem with the machine to come back and we can repair or replace. This is the Australian rule if you have a problem with in month thn, it should be replaced rather than fixing. I have problem starting with the product within one month, I approach of dicksmith three times, but they gave me a lollipop. I am very disappointed by the service of dicksmith. I am very disappointed by the service of Toshiba. I sent to iseekcomputing and call back from their $65 would be paid by the customer to solve this problem, if the same problem is coming soon in the future that agaim pay $65 to fix.

  I have the Toshiba team ring that they reset as factory defauld but the problem. In the end, I want to replace my laptop because I am not happy with that. I've used nothing, much work is underway and my laptop is still iseekcomputing since Monday.
  Kulwant singh

  In the end, I want to replace my laptop because I am not happy with that.

  AFAIK that the manufacturer of the device does not replace the unit, but in case of hardware problems, the warranty will cover the repair costs.
  If you want to replace the unit purchased, you will need to talk to your dealer who...

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• Problem with new incoming messages to my Windows Mail account

  Since 2-3 weeks, I've known more fault with new messages from my Inbox on Windows Mail.  I have the 1st message, but then the connection is interrupted and I get the following message: "your server has ended suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.tiscali.co.uk', server: 'pop.tiscali.co.uk', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800CCC0F. "Error may occur when I log in to access new messages from the server, or when the mail comes while I was already connected.  The fault is intermittent: sometimes I can access mail normally again.  When I live the flaw, I close the Windows Mail error message, press the send/receive button and my incoming emails (including the 1st) is normally followed.  For the record, I'm not problems with outgoing mail.

  I would appreciate any ideas on what could be causing this fault and what remedial measures I could take.

  Charles

  You are welcome.
   
  See if that helps.
  http://www.solveyourtech.com/how-to-disable-or-turn-off-email-scanning-in-Norton-360/
   
  I have no first hand know how to do this in Norton that I would never use Norton. Very common with any security program which is mail scanning has never caused a problem, but there is an update and 'poof', there you go.
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   

• HP Officejet Pro L7590 problems with new software

  Hello

  I have a HP all-in-one OfficeJet Pro L7590.  I had to move the printer on another computer that is running Windows 7.

  When I install and try to print to the printer does not act as he did with the software that was on the old computer XP.

  What I mean is that the printer will not print double side which is a feature that I used a lot.

  I downloaded and reinstalled the software and downloaded used the HP print and Scan doctor.  When executing this I was told there was a driver conflict so I unplugged the usb cable and drivers have been removed and when I plugged it in new dirivers were installed.

  Always when I go to properties and select Quick economy and printing on two sides he spits a page then the printer acts as if it was out of paper, and then when I press OK on the printer it prints the second page on another sheet of paper.  Note: What is printed on the 1st page prints correctly and what is printed on the 2nd page works properly for printing on the other side, but it is not the other side, but a separate sheet of paper.

  Your help would be MOST APPRECIATED what!

  Note: I repeat that the software that worked under Windows XP has never had this problem.  This new version of the software running under Windows 7 has a problem.

  Hello

  Just to thank everyone who responded to my questions about the problem with printing 2 Facer on OfficeJet Pro L7590 by HP.  I did the following and it seems to have solved the problem of this printer DO NOT print on two sides of a sheet of paper.

  1 deleted all the computer printer software

  2 used the utility available on HP website washer to clean any persistent software that I couldn't find.

  3. set the printer back to factory defaults.

  4 use HP printer Installation Wizard to find and install the fix version of the software that sits on the HP website.

  Thanks again for those who repsonded and I hope the above helps anyone who might read this message.

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.

• Problem with new monitor when you play Cityville

  Recently installed new monitor (HP2511x), now the zoom in/out function does not work in Cityville.  It works very well to Farmville, and it still works in Cityville on my laptop, so it's something on the new monitor.  Any ideas?

  It sems to be a chip on board:
  http://en.Wikipedia.org/wiki/GeForce_6_Series#GeForce_6150SE

  You have no problem with your old monitor?
  Did you use another resolution (bottom) with the old?
  You can try to fix this old resolution for your new monitor, too.

  Then there should be no problem for your graphics chip.

  HTH
  C.

• Problem with resizing table InDesign CS5

  I have problems with resizing of tables in InDesign CS5.

  The width can be entered and a decrease, but the right height do move up nor down when you pull in the lower right corner or anywhere else on the base of the columns.

  Does anyone else have this problem?

  Is it a bug or maybe just me not understanding things correctly in the help...?

  Any contribution is appreciated if you knock out. :-)

  Document corruption is sometimes disabled by exporting for Exchange. See remove minor corruption by exporting

• Problem with dynamic table

  That users write a lot in the text fields, the table to a different page breaks (it seems not nice) and overflows. The users cannot see the rest of the table.

  The problem seems to be the subform below. You have any ideas to prevent this, without much changing the interface?

  See you soon,.

  Edigo

  PS: I could not find the attachment button to download form... It used to be down!

  Please click here for the form

  http://www.Megaupload.com/?d=OKGA03VE

  Edigo,

  Here is the updated file for the problem with the global field.

  https://Acrobat.com/#d=gDwYFDJIa6zSQ9JAtAaXUQ

  See if the column suggessitions works according to your requirement...

  One thing is that if you enter more text in the field, the Table row / will do a page break, if it extends beyond the height of the page.

  So, if you enter a smaller length text in another field, then it appears on the first page but since the line has been "Broken Page", if you click the same field in the second row it also displays the same text. (Once you remove your mouse on this second page of field, the text disappears. But it will appear in the first page all the time. The text in this field was not "Broken Page", this is the reason for this kind of behavior).

  Hope I explained it's better for you...

  Let me know if you need help...

  Thank you

  Srini

• Problem with 'show tables' syntex and dashes

  I am currently working on an application that requires me to all tables in a database of output.
  The name of the database consists of the domain name (which include a dash "-") and a name I specified when creating.
  
  So, when I use:
  < name cfquery = "qTables" > display tables < / cfquery >
  < cfdump var = "" #qTables # "/ >"
  
  I get a result with the table with the title of the column names: TABLES_IN_DOMAIN-NAME_DBNAME.
  When I try to refer to this variable, SEE process only the name before (and not including) the dashboard.
  So the error I get is: "Element TABLES_IN_DOMAIN is undefined in QTABLES.
  
  Is there a way around this problem?
  Thank you in advance.

  You can reference the query using the notation of the structure

  
  #qTables ["TABLES_IN_DOMAIN-NAME_DBNAME"] [currentRow] #.
  

• Problem with adf tables dynamyc region

  Hello.
  
  I have a problem when use ADF tables in dynamic regions. Happens if the table is inside the first task flow that is loaded (by default) in the dynamic region, recovers the data perfectly, but if the table is in a second, third and so on. flow, the task does not retrieve the data. This only happens with adf tables and graphs, if I use a form of component, for example, there is no problem.
  
  Any idea which can happen?
  
  I use Jdveloper 11.1.1.1.0
  
  Appreciate any ideas or help with this problem
  
  In iexplorer 8 gives the following error:
  
  Band details of page errors
  
  User agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)
  Date: Wednesday, December 2, 2009 16:17:48 UTC
  
  
  Message: 'null' is null or not an object
  Line: 1105
  Character: 2
  Code: 0
  URI::7001/SGLadf-ViewController-context-root/afr/partition/ie/default/opt/collection-11-r1.js http://seisbd101.dgac.cl

  Hello

  Define the scope of the bean managed for the bean that switches between the regions to more far-reaching than demand: for example, set it to viewScope or pageFlowScope. This fixes the problem

  Frank