Problem with dynamic table
That users write a lot in the text fields, the table to a different page breaks (it seems not nice) and overflows. The users cannot see the rest of the table.
The problem seems to be the subform below. You have any ideas to prevent this, without much changing the interface?
See you soon,.
Edigo
PS: I could not find the attachment button to download form... It used to be down!
Please click here for the form
http://www.Megaupload.com/?d=OKGA03VE
Edigo,
Here is the updated file for the problem with the global field.
https://Acrobat.com/#d=gDwYFDJIa6zSQ9JAtAaXUQ
See if the column suggessitions works according to your requirement...
One thing is that if you enter more text in the field, the Table row / will do a page break, if it extends beyond the height of the page.
So, if you enter a smaller length text in another field, then it appears on the first page but since the line has been "Broken Page", if you click the same field in the second row it also displays the same text. (Once you remove your mouse on this second page of field, the text disappears. But it will appear in the first page all the time. The text in this field was not "Broken Page", this is the reason for this kind of behavior).
Hope I explained it's better for you...
Let me know if you need help...
Thank you
Srini
Tags: Adobe LiveCycle
Similar Questions
-
Hello
Sorry for my bad English.
I have a problem with a table. I made a table with a script, but when I add a new line, this script will not work in the new lines. I know that I have something wrong, but I do not know the solution. Anyboy help me? You can see the file in http://www.frmgm.jazztel.es/duda.pdf. I am new in programming.
I thank you very much.
OK, now I understand... each row that you add to the table changes the somExpression for objects (so that they are unique). The repeating subform Gets a case number, but the rest of the phrase remains the same. If you do not include a number of occurrence, then the 1st appearance is supposed to... that is why only the 1st row is affected. You can build expressions so that you can derive the correct number of occurrence. The click event code would look like this:
If (xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]").) Casillaverificacion1.RawValue == '0') {}
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "readOnly";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = 'hidden ';
} else {}
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = "visible";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion1.access = "readOnly";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "open";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
}You can see that the xfa.resolveNode takes a string that represents the object we want to use. The string is then built and the number of occurrence of the Fila1 subform is derived by obtaining the index number of the subform parent of the object that we clicked (this.parent.index). Occurane numbers are wrapped in [] brackets. The rest has not changed. You will need to update your code to use this technique.
Hope that helps
Paul
-
Problem with create table as select (DEC)
Hello
We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
Or any other solution to solve this problem?
Thanks in advanceSweety wrote:
HelloWe try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
Or any other solution to solve this problem?
Thanks in advance
No, this is not possible. You need to get the manuscript of dependent object and create it manually.
-
Problem with dynamic arrays, XML and JavaScript patterns
With the applied XML schema my JavaScript does not correctly work when it is added a 2nd row at my dynamic table. Instead of an added empty line 1st row data is copied on the 2nd line and if you change the data in the 2nd row it modifies data in the 1st row also. It works fine if the XML schema data connection is well removed.
No idea what I can do to get this working with the schema that is applied in the same way, it works without the schema?
Thanks for your help,
Brian
There you go. Its not a problem.
-
Problem with adf tables dynamyc region
Hello.
I have a problem when use ADF tables in dynamic regions. Happens if the table is inside the first task flow that is loaded (by default) in the dynamic region, recovers the data perfectly, but if the table is in a second, third and so on. flow, the task does not retrieve the data. This only happens with adf tables and graphs, if I use a form of component, for example, there is no problem.
Any idea which can happen?
I use Jdveloper 11.1.1.1.0
Appreciate any ideas or help with this problem
In iexplorer 8 gives the following error:
Band details of page errors
User agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)
Date: Wednesday, December 2, 2009 16:17:48 UTC
Message: 'null' is null or not an object
Line: 1105
Character: 2
Code: 0
URI::7001/SGLadf-ViewController-context-root/afr/partition/ie/default/opt/collection-11-r1.js http://seisbd101.dgac.clHello
Define the scope of the bean managed for the bean that switches between the regions to more far-reaching than demand: for example, set it to viewScope or pageFlowScope. This fixes the problem
Frank
-
Problems with dynamic links between Premiere Pro and After Effects
Hello
dynamic binding (insertion of After Effects compositions on a Premiere Pro schedule) rarely worked properly since it was introduced. Problems vary (for example "media disconnected" made plates, old versions of comps rendered).
What's worse, is that you can never tell what will be ultimately made out of Premiere Pro. Thus, a typical professional workflow to several projects together to finish during the day and batch overnight rendering can cause a catastrophe.
Of course, the option is to not use dynamic link. Which makes then less competitive whole adobe.
This subject has been widely discussed for years has been a dynamic links. I'm not the only one having this problem, and the problem is far from new.
My only question is:
Adobe: have you ever fix dynamic links?
I don't really understand how you focus on software development in your company. The vast majority of the features of CC is little or not useful. The most important thing in a professional environment is consistent and reliable - performance can you please focus on that?
I'm inspired to write this post because I just arrived in my edit at 07:00 only to find that my night makes is the wrong versions. All bed very well in the body and AE, damage the final rendering off Media Encoder used an older version of one of my compositions, and that I have nothing to send to my client.
Janne
Title edited by Kevin Monahan.
Management of files Adobe seems to rely on the names and the last path of known files. Body loses links Dynamics (and other files) with frightening regularity in a situation where nothing has changed in the hierarchy of files, the files.
16, when a hard disk of 8 GB was a huge drive, Pro Tools has been littering files on several disks because, as was the creation of audio files in real time, she had to. Digidesign introduced into a system which incorporated a unique program generated number in each file. Since that day I have never had a problem with lost files or correlate. I can move them anywhere, on any system and any PT session concludes that they are with total reliability - and we are talking about a lot of projects with thousands of files, through several studios. If you are looking for files, you can choose to use the identification number, the name of the file, the length of the file, or any combination of these. Which allows for the substitution of file.
Until Adobe address this problem with a solution similar to that of Pro Tools, we'll be constantly beset by problems.
-
problem with dynamic mask.
I have a video with green screen. I removed the green part of the video. in this way, I have people in the video without background,
I want to get this effect: Morgan - after - YouTube 01:02 I want to insert a video or an image on top of the population with green screen, but this new video should stay only on the people and it should not cover the bottom.
I get this with a simple mask for 1FPS, but the people themselves moves and I can change the mask of each image.
I am looking for an effect that create a dynamic mask or a way of excluding the background in the new video.
Sorry for my English, but explained a problem with sequels in a another language is very difficult.
I hope that everyone knows the effects or a video tutorial
I'm sorry, but I can't see the video in the USA. However, I think I know what you want to do. You want the Green people shielded to become invisible. In their shapes, you want to put the new video.
It's easy. Add the video you want to fill the hole of people-shped on your comp. On the top layer, add the green screen of people. Now go to the bottom layer and use the layer screen green people as an Alpha inverted Matte. You will see your video of replacement in a hole in the form of people.
-
Calc problem with fact table measure used in the bridge table model
Hi all
I have problems with the calculation of a measure of table done since I used it as part of a calculation in a bridge table relation.
A table of facts, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate is SUM. Whenever PROJECT_COST was used with any dimension, the appropriate aggregation was made at appropriate levels. But, no more. One of the relationships that project_fact is a dimension, called PROJECT.
PROJECT_FACT contains details of employees, and every day they worked on a project. So for one day, employee, Joe, could have a PROJECT_COST $ 80 to 123 project, the next day, Joe might have $40 PROJECT_COST for the same project.
Dimension table, PROJECT, contains details of the project.
A new feature has been added to the software - several customers can now be charged to a PROJECT, where as before, that a single client has been charged.
This fresh percentage collapse is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the project, CUSTOMER_ID, will BILL_PCT. BILL_PCT always add up to 1.
Thus, the bridge table might look like...
CUSTOMER_ID BILL_PCT PROJECT
123 100.20
123 200.30
123 300.50
456 400 1.00
678 400 1.00
Where to project 123, is a breakdown for multiple clients (. 20,.30.50.)
Let's say in PROJECT_FACT, if you had to sum up all the PROJECT_COST for project = 123, you get $1000.
Here are the steps I followed:
-In the physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE and PROJECT_BRIDGE (a 1:M) PROJECT.
PROJECT_FACT = > PROJECT_BRIDGE < = PROJECT
-In the logical layer, PROJECT has a 1:M with PROJECT_FACT.
PROJECT = > PROJECT_FACT
-Logical fact table source is mapped to the bridge table, PROJECT_BRIDGE, so now he has several tables, it is mapped (PROJECT_FACT & PROJECT_BRIDGE). They are defined for an INTERNAL join.
-J' created a measure of calculation, MULT_CUST_COST, using physical columns, which calculates the sum of the PROJECT_COST X the amount of the percentage in the bridge table. It looks like: $ (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT)
-J' put MULT_CUST_COST in the presentation layer.
We still want the old PROJECT_COST autour until it happened gradually, it is therefore in the presentation layer as well.
Well, I had a request with only project, MULT_CUST_COST (the new calculation) and PROJECT_COST (the original). I expect:
PROJECT_COST MULT_CUST_COST PROJECT
123. $1000 $1000
I'm getting this for MULT_CUST_COST, however, for PROJECT_COST, it's triple the value (perhaps because there are quantities of 3 percent?)...
PROJECT_COST MULT_CUST_COST PROJECT
123 $1000 (correct) $3000 (incorrect, it's been tripled)
If I had to watch the SQL, you should:
SELECT SUM (PROJECT_COST),
SUM (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT),
PROJECT
Of...
PROJECT GROUP
PROJECT_COST used to work properly at a table of bridge of modeling.
Any ideas on what I got wrong?
Thank you!Hello
Phew, what a long question!
If I understand correctly, I think the problem is with your old measure of cost, or rather that combines with you a new one in the same request. If you think about it, your request as explained above will bring back 3 rows from the database, that's why your old measure of cost is multiplied. I think that if you took it out of the query, your bridge table would work properly for the only new measure?
I would consider the migration of your historical data in the bridge table model so that you have one type of query. For historical data, each would have a single row in the bridge with a 1.0 BILL_PCT.
Good luck
Paul
http://total-bi.com -
Problem with resizing table InDesign CS5
I have problems with resizing of tables in InDesign CS5.
The width can be entered and a decrease, but the right height do move up nor down when you pull in the lower right corner or anywhere else on the base of the columns.
Does anyone else have this problem?
Is it a bug or maybe just me not understanding things correctly in the help...?
Any contribution is appreciated if you knock out. :-)
Document corruption is sometimes disabled by exporting for Exchange. See remove minor corruption by exporting
-
Hello, all.
I'm having trouble with dynamic text not displaying only not on the scene during execution. When I test the scene, fields of text but loading, but when I test the movie, or run publish a snippet, the text is not there. Some figures appear unstable in the text fields, but are often completely empty. --J' did ensure that the fonts have been included and I can't understand why this is happening.
Any ideas or suggestions are greatly appreciated.
Thank you.
Try another font which has called to work correctly, such as Arial and see if you still have the problem. Not all fonts can be embedded correctly...
-
Weird problem with dynamic text
Hello
I created a dynamic text field - mediaImportName001 (created and it contains the name of a file that I have chosen to import them using a browser (as3 and AIR) button.)
It works very well - I can import the file, and the name appears in the field.
I would now like to pass the content of the text field to another text field. But I'm not content. If I try to find the contents of the textField trace("mediaImportName"+thisNum).text - Flash returns "undefined" (even though I'm him asking to draw once the field has been filled).
I use the following code to check that the material is really there and named correctly (the code returns the children):
for (var i: uint = 0; i < this.numChildren; i ++) {}
trace (this.getChildAt (i) .name + "\t type:" + typeof (this.getChildAt (i)) + "\t" + this.getChildAt (i));
}It returns:
object: type instance370 [object, form]
object: type mediaImportName001 [TextField object]
object: type mediaFiletype001 [TextField object]How can I get Flash to give me the text in mediaImportName001?
It's weird - this.getChildAt (i) .name
from above gives me...
mediaImportName001,
yet
trace (['mediaImportName' + thisNum] .name);
returns undefined (thisNum represents an increment I used to name several clips and text fields and in this case trace (thisNum); return 001)
Any ideas why this happens?
Thank you
Shaun
No logic problem, just a problem with describing the problem (as far as the fix goes) and using the property name (as far as the issue goes). There is a difference between the creation of a dynamic textfield (a type of textfield) and dynamically a textfield (using code to create).
In AS3, the name property is a property and it is not the same as the name of the instance that you can assign to an object on the stage. To target an object using its name property, you must use the getChildByName() method, or alternatively, you can use the variable you used to create it. You may need to cast as a TextField object as well as to operate...
trace (TextField (this.getChildByName ("mediaImportName" + thisNum)). (Text);
which would produce the same result as the use of...
trace (mediaImportName.Text);
I don't know how the numbering disperses on "001", but you might find it easier to work with by storing just the instances of an Array by using the media_file_num to set the index where they get. Then, you would be able to target the textfield to help...
trace (tfArray [thisNum]. (Text);
-
Problem with 'show tables' syntex and dashes
I am currently working on an application that requires me to all tables in a database of output.
The name of the database consists of the domain name (which include a dash "-") and a name I specified when creating.
So, when I use:
< name cfquery = "qTables" > display tables < / cfquery >
< cfdump var = "" #qTables # "/ >"
I get a result with the table with the title of the column names: TABLES_IN_DOMAIN-NAME_DBNAME.
When I try to refer to this variable, SEE process only the name before (and not including) the dashboard.
So the error I get is: "Element TABLES_IN_DOMAIN is undefined in QTABLES.
Is there a way around this problem?
Thank you in advance.You can reference the query using the notation of the structure
#qTables ["TABLES_IN_DOMAIN-NAME_DBNAME"] [currentRow] #.
-
The relaity hard layers while no problem with a table centering
I'll build a Web site using tables, decided this was the best way to get a finish centered on 1024 and 800 without having to learn how to build a website that changes for the user who viewed.
But then I hit a problem. I roll over the buttons that activate one layer show/hide, but it does not work. If I set up properly for 1024, he died in a fourth 800 and so. How to play ball with my table settings?-Change
on this subject.
-change
on this subject.
and this-
on this subject.
and see if that helps.
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
=================="abdezines" wrote in message
News:eaoosv$4EE$1@forums. Macromedia.com...
> I am building a website using tables, decided that it was the easiest way
> to
> get a finish centered on 1024 and 800 without having to learn how to build
> a
> Web site that changes for the user who viewed.
>
> But then I hit a problem. I roll over the buttons that activate a
> Show/hide layer but it does not work. If I set up properly for 1024,
> This is
> off in a fourth 800 and Yes. How to play ball with my table
> settings?
> -
I have a list of the cities listed which are called in the dynamics of a table using MySQL
When the customer registers the city is selected and every time the user adds a job and the number of dynamic links, how many jobs in the city.
If the user clicks on the city and details for jobs in this city should appear.
But the city is written as 'Chester & North Wales' in the database
A few other cities/departments are written this way also.
And when the user clicks on the link it evokes "there are no jobs for the submitted search criteria {Chester}. Please try another field. »
It lacks the & North Wales little and only shows "Chester".
Heres my php for the link:
< div class = "smallTextCount" > < a href = "search_by_location.php? rest_city = <?" PHP echo "$row_jobs_locations [Francisco]?" ">" onMouseOver = "<?" PHP echo trim (preg_replace (' #[^ \p {L} \p {N} a-zA-Z0-9] + #u', ", $row_jobs_locations ['short-term']));? "> ()" onMouseOut = "mouseout/mouseouthandler() ()" > <? " PHP echo $row_jobs_locations ['short-term'];? > < / a > (<? php echo $row_jobs_locations ['job_count']? >) < / div >
Heres my SQL:
@mysql_select_db ($database_db, $db);
$query_by_location = "SELECT * from the city OF"
LEFT JOIN restaurants WE
restaurants.rest_city = city.city_name
LEFT JOIN jobs ON
restaurants.rest_id = jobs.rest_id
WHERE job_status = 'ON' AND rest_city = ' $_REQUEST [rest_city] "";
$by_location = mysql_query ($query_by_location, $db) or die (mysql_error ());
$row_by_location = mysql_fetch_assoc ($by_location);
$totalRows_by_location = mysql_num_rows ($by_location);
It's the message output:
<? PHP} else {/ / if the PropID = empty then display table with Message? >}
< table width = "100%" border = "0" class = "JobTextDescription" >
< b >
< td > there is no jobs for the < b > {<? php echo $_REQUEST ['rest_city'];? >} < /b > search criteria. Please try another field. < table > textThe_FedEx_Guy wrote:
> But in the database, the city is written as "Chester and North Wales.
> Some other cities/departments are written this way also.That's your problem. The variables passed by a URL are treated as the
name/value pairs separated by an ampersand. Your URL looks like this:search_by_location.php? rest_city = Chester + & + North + Wales
Therefore, the value of rest_city is Chester. North Wales is considered
another variable that has no value.Change the ampersand to the word 'and '.
> Heres my SQL:
>
> @mysql_select_db ($database_db, $db);
> $query_by_location = "SELECT * from the city OF"
> LEFT JOIN restaurants WE
> restaurants.rest_city = city.city_name
> LEFT JOIN jobs ON
> restaurants.rest_id = jobs.rest_id
> WHERE job_status = 'ON' AND rest_city = ' $_REQUEST [rest_city] "";This requires user input unfiltered directly to your database, leaving you
wide open to code SQL injection. You should always pass user input to
mysql_real_escape_string() or in some other way before you filter it
insertion in a SQL query. $_REQUEST is also less secure. You
must specify where you expect the data will come - in this case,.
Array $_GET."WHERE job_status = 'ON' AND rest_city = '".
mysql_real_escape_string($_GET['rest_city']). "'";--
Adobe Community Expert David Powers
Author, "The Essential Guide to Dreamweaver CS4",
"PHP Solutions" & "PHP Object-Oriented Solutions.
http://foundationphp.com/ -
Hi again,
in the user interface editor, I set up a table with 7 columns, including a tag line. Now I have 3 column is the column on the right. as a result, I chose 3 column, pressed '' Cut column '', and indeed, the column is part. However, I can't do to stick to the right place: if I select the column 6, or 7, or 8 and then press the button "Paste the column", the old column 3 gets stuck, but never in the last column, but in the penultimate...
What's wrong?
Thank you
Wolfgang
Hi Johannes,
I solved 'the problem' slightly different cutting and repasting of the right :-) column Thanks anyway!
Maybe you are looking for
-
Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access
Hello My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.Is that someone can help
-
Acquire simultaneously with PCIe-6535
Hello -J' use a PCIe-6535 to manage an electronic home-made (working) card. The electronic card has a FIFO used to store data.I need to read that data during the acquisition, and the moment for playback is defined by a product a DDS signal thatI have
-
Beats Audio gone after updating of Windows 8
Hi guys, I recently had to update my computer Windows 8 due to a technical error, so I lost everything. Unfortunately, this also uninstalled my drivers etc, including HP Beats Audio that came on my computer. I don't know if it is possible to download
-
install photoshop elements 5.0 on Vista (it has been develoed for windows XP)
Installs it cd but when the program is started nothing happens.
-
Playstore Phonegap android version mismatch code
I built my application using the PhoneGap build service. I use gradle as the generation tool.When I published my application I got the following versions for android in the tag widget as attributes versionCode = "1" version = "1.0.0"Are t