Problem with Provisioning profile/Cert EPCO

Similar Questions

• Common problem with temporary profiles being loaded

  I have a recurring problem with temporary profiles being loaded.  This problem appears more widespread when moving from one user to another.  Usually it is a user with administrative privileges to a user with admin rights, but also occurs when switching between non-Admin users.  Reboot allows profile to be loaded successfully.  I saw posts on what it needs to be done with a single corrupt profile, but have not seen anything about this type of persistent problem.

  Corruption of persistent profiles can be caused by 1) malware infection; (2) defective material. I would like to start by making a thorough analysis and then if the computer is clean, test the equipment. This last start by testing the RAM, then the hard drive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  MS - MVP - Elephant Boy computers - don't panic!

• Problem with I1 Profiler update icuuc46.ddl missing

  ORIGINAL TITLE: problem with the I1 Profiler update.

  Hello

  I have the same problem as other users with my Stallion - I1 Display - when I update the software; missing icuuc46.dll.
  I am still using Windows XP SP3.
  Could you please help me?
  Thank you.

  Hi ajeshdsouza,

  I just wanted to say that they contacted me X-Rite and gave me the solution to my problem. And it is easy to do. Here it is:
  «Unplug your device from your computer, then download and install this new version of X-Rite devices.»

  http://www.XRite.com/product_overview.aspx?ID=1509&action=support&SoftwareID=1262

  Once you have installed it, restart your PC and when the computer comes back to the top again, please plug the device into a USB port on the back of your PC. »

  I hope this can help more people to solve this problem.
  Thank you very much once again for your quick response and your support, I really appreciate your help.
  Best regards
  Amaury.
   

• I have a problem with restore profile

  I have a problem with the restoration of profile. Initially, I was in another forum where I had help (installation), upgrade and activate forum and I copy the location of thread (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/06225f67-850b-4ae3-b29c-9b5204371a52) I need to restore my profile if you need more information, I will give you. Vista system.

  Thank you

  Can someone help me with this

• Domain admin lost button restart after you fix a problem with temporary profile. Purely aesthetic issue.

  Very strange problem occurred recently and I can't seem to find an answer for. The domain administrator account would sign on with a temporary profile between multiple clients. This problem has been resolved, had to do with the user directories. Now the question that came is the option restart is missing in the stop menu. Ive looked at the Group Policy settings and also check the admin account is in correct safety both locally and on the field. Now it is a new computer that was recently added to the domain, and it has Windows 7 Enterprise on this. The domain controller is windows server 2008 R2. Anyone have any ideas on how to solve this problem? Something I may have missed?

  Thanks in advance!

  A computer with your connected admin account, try to run Resultant Set of Policy RSOP. SMC and check the following settings:

  User configuration > Admin Temp > Start Menu and taskbar >Remove and prevent access to shut it off, restart, sleep and hibernation

  or

  Computer config > Windows settings > political > local policies > user rights assignment >shut down the system

  See if any of those appearing in RSOP, if they do they could limit your admin account according to which the GPO is applied. In the meantime try to run the Shutdown - r (for restart) and Shutdown-s (closure) orders and see if she will allow you to restart the system like that.

  Let me know if it helps.

  -Josh

• Recording on a problem with Vista profile

  I have a laptop model Satellite L300-1 has 3 less than 1 year for home use that is running Windows Vista. I have problems to connect.

  Usually, when I connect I just enter my password (i.e. no required user id) and it then takes me to the main area where I can connect to the internet, Word or other.
  However when entering my password an error message pops up saying 'the user profile service does not log. User profile cannot be loaded.

  If anyone can suggest what I'd do here who would be appreciated.
  Thank you

  Hi Bakkercd,
  Looks like a broken profile...
  try to log on as an administrator and clean this profile (recommended safe mode)
  Maybe you are lucky and able to load this profile later...

  too many files in a profile (mainly on the desktop) can prevent such an account to loggin...
  or it is broken: in this case to make a new account NOT the same name and copy files to it.

• Problem with edit profile

  Hello

  I find it difficult if you change the details of my profile.

  The problem I encounter when I go to the profile page to edit previously added data that didn't exist. I'm surprised to see that it works like adding new profile information.

  I doubt that I am facing this problem or it is a problem for all users.

  Would be great if someone help me to solve it by myself or like OTN admin have this problem.

  Thank you

  Shidu

  I hope that this isn't a great challenge to fix. Hope OTN admin may take the necessary measures for this.

  Because bring a case when you want to update the field biography, already it may have 10 to 20 lines now if I want to add more of 10 lines I have to keep all the lines from 10-30 strike once more and he is agitated to remember all the previous one that we previously provided.

  Nice admin to fix it.

  Thank you

  Shidu

• Problem with the profile of home - com.vmware.profile.hostCacheConfig.EsxcliError

  I get a weird when error checking of the compliance of a profile of the host, I me com.vmware.profile.hostCacheConfig.EsxcliError, and the host is in an unknown state.
  

  
  

  No matter what I do I can not erase it. Even the de-selection of all sections makes no difference.
  

  
  

  The source a destination hosts are identical at the hardware level, and they are the two 5.5 ESXi.

  
  

  Any help or advice would be appreciated. Thank you.

  Well Yes, now that the DNS blip is far it seems to have been fixed. So, as usual, the lesson is - make sure DNS front and rear working professional.

• Problem with storage of the profiles moved in field with the version 20.0

  Hello. Used an online translator. At the office of a local network with the domain name. All user profiles are stored by politicians in the field in the network folders on the server using equipment "the folder redirection. With the Firefox update to version 20, it stopped working. Pages that have been stored in bookmarks do not open pages only, open new, generally nothing happens as if the buttons in the page transition actions are inadequate, all search engines have disappeared. The complete elimination of the program and repeated installation does not solve a problem with a profile. Help, only the creation of a section local profile, but it is not a solution.

  Sorry,
  This is a known problem due to the use of UNC paths does not correctly supported by Firefox 20

  There will be a special ("Chemspill") version of Firefox. It will be Firefox 20.0.1 and will probably be released Wednesday, April 10.

  If you are unable to wait for to install Firefox ESR 17.

  Firefox17 ESR is affected by this problem and intended specifically for business / corporate, up-to-date and secure.

  • Information and download links
    http://www.Mozilla.org/en-us/Firefox/organizations/
    http://www.Mozilla.org/en-us/Firefox/organizations/all.html

  This is a related thread and it contains a suggested workaround solution /questions/955232 #answer - 424739 while continuing to use Firefox 20.0.0

  It's a shame these undertakings do not use ESR apparently do not test the pre-release versions in their IT departments. At least by two Aurora and Beta

  1. Evening http://nightly.mozilla.org/
  2. Aurora, http://www.mozilla.org/en-US/firefox/all-aurora.html
  3. Beta http://www.mozilla.org/en-US/firefox/beta/

• Problems with profile after the loss of power.

  During the recent snow storm, the power in the House flickered market several times and once it was over my wife has had some problems connecting on his profile. After a reboot, could she do to her profile without any problem. My profile was gone, none of the documents office, my antivirus doesn't work in my profile only, everything that I had linked with my profile disappeared. My system restore has been disabled so can't use it. Does anyone have any ideas on how to do to recover my profile and all my documents?

  On the assumption that your profile has become corrupt (not a rare event), the following articles should help you...

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  Update your video card drivers. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• Problems with PIX 501 and Server MS Cert

  Hi all

  I have two problems with my PIX 501:

  1. registration works well. The pix has a certificate and use it with SSL and VPN connections. But after a refill, the pix certificate is lost and it has regenerated again self-signed certificate!

  Yes, I wrote mem and ca records all!

  2. at the request of ca CRL , I get the following debugging:

  Crypto CA thread wakes!

  CRYPTO_PKI: Cannot be named County ava

  CRYPTO_PKI: transaction GetCRL completed

  Crypto CA thread sleeps!

  CI thread wakes!

  And the CRL is empty.

  Does anyone have any idea?

  Bert Koelewijn

  Not sure about 1, but 2 is usually caused by the COP (Point of Distribution of CRL, basically the situation where the PIX can download the Revocation list from) listed in cert CA is in a format the PIX does not, generally an LDAP URL.

  Check the following prayer:

  Open the administration tool of CA (Certification Authority) then

  (1) right click on the name of CA and choose 'properties '.

  2) click on the tab "Policy Module".

  3) click on the button "configure."

  4) click on the tab "X.509 extensions".

  > From there, it can display the list of the "CRL Distribution Points".

  Turn off everything that isn't HTTP.

  You need to reinstall the CERT in the PIX, I think, but then it should be able to download the CRL through HTTP instead of LDAP.

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Error trying to create for iOS Provisioning Profiles (Distribution) .ipa

  Hello, I tried to deploy my application MAF to a .ipa package. I use jDeveloper 12 c. I've already done before for profiles of development and it was working perfectly until yesterday when I tried to create a .ipa with certificate of Distribution. Now, I can't deploy for distribution, or for the development...

  The corresponding configurations for the iOS platforms, I did: I created the profile of Provisioning for Distribution in space subscribers for Apple developers and by signing the identity, I added the certificate corresponding to Distribution applications. I also defined an APP ID, I have configured my CRG - application.XML with the corresponding APPID, well.

  But when I tried to deploy my application to a package I get the below error:

  [11:33:13] successful deployment

  [11:33:13] security copy of related files at the request of the MAF...

  [11:33:13] executed command-line path: / users/MYMAC/jdeveloper/mywork/myMAFApp/deploy/OTROOOOOOOOOOO/temporary_xcode_project /.

  [11:33:13] run command line: xcodebuild-window Oracle_ADFmc_Container_Template archive archivePath - /Users/myMac/jdeveloper/mywork/myMAFApp/deploy/OTROOOOOOOOOOO/Destination_Root/Company.xcarchive - IPHONEOS_DEPLOYMENT_TARGET = TARGETED_DEVICE_FAMILY = 1 7.0 iphoneos sdk, ADD_SETTINGS_BUNDLE 2 = No. PRODUCT_NAME = company CODE_SIGN_IDENTITY = iPhone Distribution: MY COMPANY NAME. (215AST54872)

  [11: 33:15] orders for next generation failed:

  [11: 33:15] command-line execution failed (return code: 65)

  [11: 33:15] undeployment.

  [11: 33:15] - incomplete deployment.

  [11: 33:15] could not build the iOS application pack.

  [11: 33:15] deployment failed due to one or more errors returned by 'xcodebuild.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Check dependencies

  (1 failure)

  I don't know what could happen... This happened last week when I was trying to do the same thing and I registered my app in iTunes Connect. I wasn't able to delete the iTunes Connect app so I modified the APPID and since then, I have been able to deploy my application to a package again (certificate for development), but this time I didn't create a new application in iTunes Connect, so I don't know what could be happeing...

  I hope you guys can help me because I'm panicking... I ran out of options...

  I'm sure it's a problem with certifications, because I can deploy to iOS Simulator without any problem.

  Thank you very much!

  Thanks for your advice. I ran the command in the console and I could see the xcodebuild log and I realized that I was not setting good App ID, so I changed it and it worked perfectly.

  Thank you very much for your help!