Problem with re-installing C7280 wireless

Similar Questions

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Cannot open Word or Power Point Error 1719 also have problems with Windows install.

  OT: problem.

  Hi all

  I used ccleaner, after finishing, I was not able to access to word or ppt... I am getting error 1719 and problems with windows install and I got dnssd missing dll, but I put one in Wow64. I really don't know where the problem lies... I tried everything from softbooting to sfc/scannow... I have windows 7... I copied the log on the desktop and I noticed this repetition:
  CSI 0000032 b [SR] could not check component of 6968173078fa737442bd424a51db3e21 files, Version = 11.2.9600.16518, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, neutral, TypeName neutral, clear PublicKey is damaged (REAL)

  but I do not understand... Someone help please urgent.

  I used ccleaner

  -> Why would you do that? CCleaner is known to cause problems!

  After finishing, I was not able to access to word or ppt

  ->, You might be able to repair the damage with the system restore. It allows setting up Windows to a point before using CCleaner.

• problem with once installed Comfortaa

  Hello

  As the title says I have a problem with the installed versions of the time via the option hosted in muse.

  The police seem fine in design mode, but it does not when preview/export.

  I can't find a solution via google search.

  I'm a bit of a hurry, so any help would be really useful.

  Thanks in advance.

  EDIT: I noticed now that it works ok with engligh but not with the Greek. I still can't get it to work.

  Home page , you can see the police in the foot as a police system and "NEA PROIONTA" where it does not work as expected.

  I tried to check the location and the font used, seems to end of the homepage shows fonts same font you used in the (Comfortaa) design.

  I think that the problem is solved?

  Thank you

  Sanjit

• Problems with Realteck 8187 B wireless LAN adapter

  I am running Windows XP and since a month started having problems with my Wireless LAN connection. The installed adapter is a Realtek 8187 B. When I start the connection opens briefly, then begins to show the low connectivity with yellow dots under the icon on the status bar. Sometimes I have connection then connectivity closes its doors as soon as I pass my home page.

  Other times it falls back after about 5 minutes. I can usually clear it by restarting the computer sometimes twice. What I need to download an updated driver.

  Thanks in advance

  Jamie

  > Do I need to download an updated driver.
  I think you should check the portal Tosiba WLAN and install the latest version of the driver Windows XP Home edition. Do it first and check the functionality.

  Toshiba WLAN portal page is - http://aps2.toshiba-tro.de/wlan/

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Series of HP DV7-3000 - Dv7-3085Dx - problems with launch of key wireless, fast

  I have some problems with my laptop HP Pavillion Dv7-3085Dx with Windows7.

  I had a problem with my quick launch buttons, none of them work... Mute, Play/Pause, Stop... and especially the wireless button...
  My biggest problem is the wireless button, because I'm not be able to turn it on...
  After a time there... I used it normally... but I got used to the Windows + X to enable and disable my wireless...

  But now I can't use my wireless sort!
  Windows + X: The button is disable.
  BIOS: There is no option to turn it on.
  Net Manager: the Drive of WiFI is accurate, up-to-date and there is no signal problems.

  I have already desisntall and install the newest drive, reinstall the Windows...
  and no result...

  @jcbrasileiro

  Hello

  Do a hard reset:
  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button.

  Verification is your problem is resolved or not.

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• Cannot install error matix web: problem with windows install.

  Original title: install windows package

  Hi, I was wondering if someone could help me, not used webmatrix for awhile and I put on and its not responding do not, I tried to re download and no luck, from the web, platform installer it returns constantly so I had a problem with the windows package install. Please can someone help?

  I use microsoft web platform install 3.0

  It fails when I try to install and a message appears

  ASP.NET web pages

  This product has not been installed successfully. There is a problem with this windows package install. a program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  ASP.NET web pages language packs

  This product can not be installed because a failure that it was not installed successfully.

  Microsoft webmatrix.

  This product cannot be installed because a prduct which it depends have not installed successfully

  Hello

  1. What is the message exact error do you get when you try to install the web matrix?

  2. where did you download webmatrix?

  I suggest you to try the steps below and check if it helps.

  Verify that the Windows Installer service is running or not.

  Start the Windows Installer service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of items, double-click Windows installation service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.

  e. restart the computer.

  Check whether the problem is resolved.

  Hope this information is useful.

• Cannot install ITunes error 'problem with windows install.

  Original title: try to install iTunes - says the problem with uninstalling windows package - a program required for this install... could not be executed. HELP - everything tried

  I have windows vista - quick time is newly installed, but can't get iTunes to install - help

  Hello
  1. is the question confined to the ITunes?
  2 are you able to install other programs on the computer?
  In the case where the issue is limited to the installation of ITunes, you can check that the links to Apple support provided below to solve the problem.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926
  Cannot install ITunes and QuickTime for Windows without Visual Basic Script (VBScript)
  http://support.Apple.com/kb/TS1331
  You can get in touch with support for ITunes to get help.
  ITunes support
  http://www.Apple.com/support/iTunes/

• Photosmart D110: Problems with re - install

  I uninstalled the Photosmart D110 my computer to try to fix a problem with another computer in our household is not able to connect wireless not think that might help solve the problem. Instead, it has been a nightmare for reinstall. I tried to follow the suggestions on the HP site, nothing helps. I continually receive the 1706 error after restarting my computer. When I try to re - download the driver software, I get the error message "key not valid for use in specified state. Please help with a solotion for this problem. Thank you

  Ok.

  Indeed the DocProc component seems not related with the D110 model, have you had any previous HP model?

  If so what model was it?

  I guess it's in conflict with some old reminder of HP software

  In Control Panel, select programs and features, then type HP in the search bar.

  How many HP applications do you see? a list of these items could help.

  Try the link below and click Run now:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Of the screen, select apply automatic difficulty, and then select uninstall.

  Look at the list, if there is no article listed as DocProc uninstall.

  Once you're done open the temp folder, as described in my previous post.

  Open the installation folder, then the Scan folder and select Repair for Scan.msi.

  Once you are restarting your PC and try to scan the image.

  Please let me know if that can help you, otherwise specify the above information.

  Shlomi

• Problem with Windows install. Error 1723. ___

  Hello. I am running windows 7, try to install the latest version of Java. Failed to install, I get the following error message:

  Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact you staff support or package of the seller.
  I have already searched the internet for a solution and have tried a number of things that have been proposed, including:
  -try "offline" installation of Java.
  -cleaning the registry with CCleaner.
  -try to uninstall any failure installs with Windows Installer Clean Up-> no installation of Java have been found.
  None of these suggested solutions have solved my problem.

  Hello

  ·        When you did a SFC scan, do you have any system messages from violations of integrity?

  ·        Were you able to install and uninstall all programs on the system before?

  Installation can be terminated prematurely, or there may be a fatal error during installation. Windows Installer error 1723 occurs because Windows Installer cannot start the source files for the configuration of the software application you are trying to install. These files may be missing or damaged. In general, the original MSI installation files will be cached in the ' C: winntInstaller directory before installation begins. Inappropriate caching of a file MSI is main causes of errors, too.

  Try the following to correct the setup of Windows 1723 error.

  a. to correct this error, you must ensure that you have the latest version of InstallShield. If this isn't the case, then update to correct the error.

  b. If the installation cannot find the necessary files, try using the search function of the window to locate the files and specify the location for the installation process.

  c. you must log on as an administrator before installing.

  d. If you install on a network, make sure you have full access to the network location where the installation is running.

  e. try the reinstatement of Windows Installer.

  I suggest you to check the below link.

  Error 1723. There is a problem with this Windows package install.

  http://www.Java.com/en/download/help/error_1723.XML

  ·        The place where you try to download java?

  I suggest you to download java from the link below and then checks to see if you are able to install it on the system or not.

  http://www.Java.com/en/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem with access point or wireless adapter, a network cable is not plugged in correctly or may be broken

  I recently purchased the 8 Envy Touchsmart PC Notbook HP windows. Immediately I put in place, and everything worked well - even on the Internet, unfortunately has an hour or so I started to have problems with Internet... I go through the process of diagnosis to do repair, but that did not help much, so I updated my laptop. For a few minutes, it worked, and then the problem once more. Frustrated, I checked my other laptop (which I use to write this), and the network was very good. In fact, all my other WIFI device did not appear to have problems. Anyway, thinking it would help, I connected to my router, changed my mac address, it did not work so I had to go back to the default Mac setting. I ran troubleshooting 300 times or more, but who has not fixed my problem at all.

  I checked my network card, it is updated... I see no problems with it at all. I checked every setting in there, but there seems to be no problem. sometimes windows network diagnostics say found problems, he's talking about wireless /wifi ip is not configured or something, I don't remember the exact words. He would say that it is connected, but I see the yellow sign that appears on the wireless icon. He would also say «identifying...» "A minute im connected and then the next day it does not.
  I do of course when it comes to setting basic stuff, but it's just beyond my comprehension. I can't point the question of the pint. I just did a complete reset, in the hope that he would go back to its default setting if I have deleted or destroyed something by accident, but I still have questions. Can someone help me please. I am frustrated and fed up frankly at this stage.
  Please get back to me as soon as possible, because I have important files on this laptop that I need to download on my drive of google.
  Thank you.

  Hi Fergiey,

  When you run the network troubleshooting tool and which indicates that the wireless IP address is not configured correctly, I suggest that you reset the stack TCP/IP and check if that helps.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

  The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

  Steps: what please refer:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. open an command prompt, press the Windows key + X select prompt as an administrator.

  b. When the user account control box pops up, click on Yes.
  c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

  netsh int ip reset c:\resetlog.txt

  
  d. Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

  SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
  SYSTEM\CurrentControlSet\Services\DHCP\Parameters.

  e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

  Please post with the State of the question.

• I have a problem with re - install Windows 8.

  Original title: WINDOWS 8

  Hello

  I have a copy of windows 8 current running on my home pc, but I have problems with the PC, I need to reinstall windows 8 on another pc, I can do it without breaking the rules?

  Hello

  If you have a copy of Windows and installed on several PC, activation may not work because the product key has already been used on another PC, or it is used on PCs more than to let the Microsoft software license agreement. Normally, the rule for most copies of Windows is 1:1, which means that a copy of Windows can be installed on a single PC.

  If your product key is used on PCs to let the Microsoft software license agreement, you will have to purchase a product key for each of your computers in order to activate them.

  Check out the link for more information.

  Why can't I activate Windows?

  http://Windows.Microsoft.com/en-in/Windows-8/why-activate-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.